[PATCH 2/6] regulator: pca9450: Fix enable register for LDO5

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

The LDO5 regulator has two configuration registers, but only
LDO5CTRL_L contains the bits for enabling/disabling the regulator.

Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
 drivers/regulator/pca9450-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index c6351fac9f4d..a815666566b5 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -447,7 +447,7 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
 			.vsel_reg = PCA9450_REG_LDO5CTRL_H,
 			.vsel_mask = LDO5HOUT_MASK,
-			.enable_reg = PCA9450_REG_LDO5CTRL_H,
+			.enable_reg = PCA9450_REG_LDO5CTRL_L,
 			.enable_mask = LDO5H_EN_MASK,
 			.owner = THIS_MODULE,
 		},
@@ -656,7 +656,7 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
 			.vsel_reg = PCA9450_REG_LDO5CTRL_H,
 			.vsel_mask = LDO5HOUT_MASK,
-			.enable_reg = PCA9450_REG_LDO5CTRL_H,
+			.enable_reg = PCA9450_REG_LDO5CTRL_L,
 			.enable_mask = LDO5H_EN_MASK,
 			.owner = THIS_MODULE,
 		},
-- 
2.39.1