[PATCH 7/9] remoteproc: qcom: q6v5: Add support for q6 rmb registers

[Melody Olvera]

When attaching a running Q6, the remoteproc driver needs a way
to communicate with the Q6 using rmb registers, so allow the
rmb register to be gotten from the device tree if present.

Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
---
 drivers/remoteproc/qcom_q6v5.c | 9 +++++++++
 drivers/remoteproc/qcom_q6v5.h | 8 ++++++++
 2 files changed, 17 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 192c7aa0e39e..e8c6be70ebfd 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -254,6 +254,7 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 		   void (*handover)(struct qcom_q6v5 *q6v5))
 {
 	int ret;
+	struct resource *res;
 
 	q6v5->rproc = rproc;
 	q6v5->dev = &pdev->dev;
@@ -263,6 +264,14 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 	init_completion(&q6v5->start_done);
 	init_completion(&q6v5->stop_done);
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		q6v5->rmb_base = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(q6v5->rmb_base))
+			q6v5->rmb_base = NULL;
+	} else
+		q6v5->rmb_base = NULL;
+
 	q6v5->wdog_irq = platform_get_irq_byname(pdev, "wdog");
 	if (q6v5->wdog_irq < 0)
 		return q6v5->wdog_irq;
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
index 5a859c41896e..95824d5b64ce 100644
--- a/drivers/remoteproc/qcom_q6v5.h
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -7,6 +7,12 @@
 #include <linux/completion.h>
 #include <linux/soc/qcom/qcom_aoss.h>
 
+#define RMB_BOOT_WAIT_REG 0x8
+#define RMB_BOOT_CONT_REG 0xC
+#define RMB_Q6_BOOT_STATUS_REG 0x10
+
+#define RMB_POLL_MAX_TIMES 250
+
 struct icc_path;
 struct rproc;
 struct qcom_smem_state;
@@ -16,6 +22,8 @@ struct qcom_q6v5 {
 	struct device *dev;
 	struct rproc *rproc;
 
+	void __iomem *rmb_base;
+
 	struct qcom_smem_state *state;
 	struct qmp *qmp;
 
-- 
2.25.1