[PATCH 01/10] brcmfmac: chip: Only disable D11 cores; handle an arbitrary number
From: Hector Martin
Date: Tue Feb 14 2023 - 04:25:42 EST
At least on BCM4387, the D11 cores are held in reset on cold startup and
firmware expects to release reset itself. Just assert reset here and let
firmware deassert it. Premature deassertion results in the firmware
failing to initialize properly some of the time, with strange AXI bus
errors.
Also, BCM4387 has 3 cores, up from 2. The logic for handling that is in
brcmf_chip_ai_resetcore(), but since we aren't using that any more, just
handle it here.
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
---
.../net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index 8073f31be27d..a6239051404b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -1292,15 +1292,18 @@ static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
static inline void
brcmf_chip_cr4_set_passive(struct brcmf_chip_priv *chip)
{
+ int i;
struct brcmf_core *core;
brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4);
- core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
- brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET |
- D11_BCMA_IOCTL_PHYCLOCKEN,
- D11_BCMA_IOCTL_PHYCLOCKEN,
- D11_BCMA_IOCTL_PHYCLOCKEN);
+ /* Disable the cores only and let the firmware enable them.
+ * Releasing reset ourselves breaks BCM4387 in weird ways.
+ */
+ for (i = 0; (core = brcmf_chip_get_d11core(&chip->pub, i)); i++)
+ brcmf_chip_coredisable(core, D11_BCMA_IOCTL_PHYRESET |
+ D11_BCMA_IOCTL_PHYCLOCKEN,
+ D11_BCMA_IOCTL_PHYCLOCKEN);
}
static bool brcmf_chip_cr4_set_active(struct brcmf_chip_priv *chip, u32 rstvec)
--
2.35.1