[PATCH v2 3/6] hwmon: (aquacomputer_d5next) Device dependent control report settings

From: Leonard Anderweit
Date: Tue Feb 14 2023 - 17:02:17 EST


Add device dependent control report id, secondary control report id, secondary
control report size and secondary control report for devices which need
different control report settings. All currently supported devices use the same
values.

Signed-off-by: Leonard Anderweit <leonard.anderweit@xxxxxxxxx>
---
drivers/hwmon/aquacomputer_d5next.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index f0c036d38e91..535d2fc0e55c 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -441,6 +441,10 @@ struct aqc_data {
const char *name;

int status_report_id; /* Used for legacy devices, report is stored in buffer */
+ int ctrl_report_id;
+ int secondary_ctrl_report_id;
+ int secondary_ctrl_report_size;
+ u8 *secondary_ctrl_report;

int buffer_size;
u8 *buffer;
@@ -513,7 +517,7 @@ static int aqc_get_ctrl_data(struct aqc_data *priv)
int ret;

memset(priv->buffer, 0x00, priv->buffer_size);
- ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size,
+ ret = hid_hw_raw_request(priv->hdev, priv->ctrl_report_id, priv->buffer, priv->buffer_size,
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret < 0)
ret = -ENODATA;
@@ -535,15 +539,15 @@ static int aqc_send_ctrl_data(struct aqc_data *priv)
put_unaligned_be16(checksum, priv->buffer + priv->checksum_offset);

/* Send the patched up report back to the device */
- ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size,
+ ret = hid_hw_raw_request(priv->hdev, priv->ctrl_report_id, priv->buffer, priv->buffer_size,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0)
return ret;

/* The official software sends this report after every change, so do it here as well */
- ret = hid_hw_raw_request(priv->hdev, SECONDARY_CTRL_REPORT_ID, secondary_ctrl_report,
- SECONDARY_CTRL_REPORT_SIZE, HID_FEATURE_REPORT,
- HID_REQ_SET_REPORT);
+ ret = hid_hw_raw_request(priv->hdev, priv->secondary_ctrl_report_id,
+ priv->secondary_ctrl_report, priv->secondary_ctrl_report_size,
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
return ret;
}

@@ -1447,6 +1451,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->serial_number_start_offset = AQC_SERIAL_START;
priv->firmware_version_offset = AQC_FIRMWARE_VERSION;

+ priv->ctrl_report_id = CTRL_REPORT_ID;
+ priv->secondary_ctrl_report_id = SECONDARY_CTRL_REPORT_ID;
+ priv->secondary_ctrl_report_size = SECONDARY_CTRL_REPORT_SIZE;
+ priv->secondary_ctrl_report = secondary_ctrl_report;
+
if (priv->kind == aquastreamult)
priv->fan_structure = &aqc_aquastreamult_fan_structure;
else
--
2.39.1