Re: [PATCH v3 0/3] StarFive's SDIO/eMMC driver support

[William Qiu]

On 2023/2/14 20:18, Ulf Hansson wrote:
> On Fri, 3 Feb 2023 at 09:19, William Qiu <william.qiu@xxxxxxxxxxxxxxxx> wrote:
>>
>> Hi,
>>
>> This patchset adds initial rudimentary support for the StarFive
>> designware mobile storage host controller driver. And this driver will
>> be used in StarFive's VisionFive 2 board. The main purpose of adding
>> this driver is to accommodate the ultra-high speed mode of eMMC.
>>
>> The last patch should be applied after the patchset [1]:
>> [1] https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@xxxxxxxxxxxxxxxx/
>>
>> Changes since v2:
>> - Wraped commit message according to Linux coding style.
>> - Rephrased the description of the patches.
>> - Changed the description of syscon regsiter.
>> - Dropped redundant properties.
>>
>> The patch series is based on v6.1.
>>
>> William Qiu (3):
>>   dt-bindings: mmc: Add StarFive MMC module
>>   mmc: starfive: Add sdio/emmc driver support
>>   riscv: dts: starfive: Add mmc node
>>
>>  .../bindings/mmc/starfive,jh7110-mmc.yaml     |  77 ++++++++
>>  MAINTAINERS                                   |   6 +
>>  .../jh7110-starfive-visionfive-2.dtsi         |  23 +++
>>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  37 ++++
>>  drivers/mmc/host/Kconfig                      |  10 +
>>  drivers/mmc/host/Makefile                     |   1 +
>>  drivers/mmc/host/dw_mmc-starfive.c            | 185 ++++++++++++++++++
>>  7 files changed, 339 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
>>  create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
>>
> 
> Patch 1 and patch 2 applied for next, thanks!
> 
> Note that I fixed some checkpatch errors/warnings. Next time, please
> run ./scripts/checkpatch.pl before you submit your patches.
> 
> Kind regards
> Uffe
z
Hi Uffe,

Sorry about that, I'll check the patches before submit next time.
Thanks for taking time reviewing this patch series.

Best Regards
William