Re: [PATCH v3 0/5] Bluetooth: hci_mrvl: Add serdev support for 88W8997

[Francesco Dolcini]

Hello Luiz

On Wed, Feb 15, 2023 at 12:36:34PM -0800, Luiz Augusto von Dentz wrote:
> On Mon, Feb 13, 2023 at 4:09 AM Francesco Dolcini <francesco@xxxxxxxxxx> wrote:
> >
> > From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> >
> > Add serdev support for the 88W8997 from NXP (previously Marvell). It includes
> > support for changing the baud rate. The command to change the baud rate is
> > taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth
> > interfaces) from NXP.
> >
> > v3:
> >  - Use __hci_cmd_sync_status instead of __hci_cmd_sync
> >
> > v2:
> >  - Fix the subject as pointed out by Krzysztof. Thanks!
> >  - Fix indentation in marvell-bluetooth.yaml
> >  - Fix compiler warning for kernel builds without CONFIG_OF enabled
> >
> > Stefan Eichenberger (5):
> >   dt-bindings: bluetooth: marvell: add 88W8997
> >   dt-bindings: bluetooth: marvell: add max-speed property
> >   Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids
> >   Bluetooth: hci_mrvl: Add serdev support for 88W8997
> >   arm64: dts: imx8mp-verdin: add 88W8997 serdev to uart4
> >
> >  .../bindings/net/marvell-bluetooth.yaml       | 20 ++++-
> >  .../dts/freescale/imx8mp-verdin-wifi.dtsi     |  5 ++
> >  drivers/bluetooth/hci_mrvl.c                  | 90 ++++++++++++++++---
> >  3 files changed, 104 insertions(+), 11 deletions(-)
> >
> > --
> > 2.25.1
> 
> There seems to be missing one patch 5/5:
> 
> https://patchwork.kernel.org/project/bluetooth/list/?series=721269
> 
> Other than that the Bluetooth parts seem fine, and perhaps can be
> merged if the patch above is not really required.

In v3 I decided to not send it to the BT mailing list, since this is
supposed to go through Shawn and the iMX/SOC tree.

Given that it would be great if you could apply patches 1-4.

Thanks,
Francesco