Re: [PATCH v3 0/4] dmaengine: dw-edma: Add support for native HDMA

[Cai Huoqing]

On 13 2月 23 21:24:05, Cai Huoqing wrote:
> From: Cai huoqing <cai.huoqing@xxxxxxxxx>
> 
> Add support for HDMA NATIVE, as long the IP design has set
> the compatible register map parameter-HDMA_NATIVE,
> which allows compatibility for native HDMA register configuration.
> 
> The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
> And the native HDMA registers are different from eDMA,
> so this patch add support for HDMA NATIVE mode.
> 
> HDMA write and read channels operate independently to maximize
> the performance of the HDMA read and write data transfer over
> the link When you configure the HDMA with multiple read channels,
> then it uses a round robin (RR) arbitration scheme to select
> the next read channel to be serviced.
> The same applies when you have multiple write channels.
> 
> The native HDMA driver also supports a maximum of 16 independent
> channels (8 write + 8 read), which can run simultaneously.
> Both SAR (Source Address Register) and DAR (Destination Address Register)
> are alignmented to byte.dmaengine: dw-edma: Add support for native HDMA
> 
> Cai huoqing (4):
>   dmaengine: dw-edma: Rename dw_edma_core_ops structure to
>     dw_edma_plat_ops
>   dmaengine: dw-edma: Create a new dw_edma_core_ops structure to
>     abstract controller operation
>   dmaengine: dw-edma: Add support for native HDMA
>   dmaengine: dw-edma: Add HDMA DebugFS support
> 
>   v2->v3:
>     [1/4]
>     1.Add more commit log to explain why use dw_edma_plat_ops.
>     2.Update the structure name in the DW PCIe driver.
>     [2/4]
>     3.Use the reverse xmas tree vars definition order.
>     4.Add edma core ops wrapper.
>     5.Add dw_edma_done_interrupt() and dw_edma_abort_interrupt()
>       global methods.
>     6.Fix some indentation.
>     7.Fix some typo
>     8.Make use off dw_edma_core prefix instead of dw_xdma_core_.
>     [3/4]
>     9.Remove unnecessary include: dw-edma-v0-regs.h and dw-edma-v0-regs.h
>     10.HDMA supports the LL descriptors placed on the CPU memory.
>     [4/4]
>     11.Split DebugFS to be a separate patch.
>     12.Refactor HDMA DebugFS like the series in @Bjorn tree.
> 
>   v2 link:
>   https://lore.kernel.org/lkml/20220925173412.u2ez6rbmfc5fupdn@mobilestation/
Hi Sergey,

  Could you please give some comments for this patch v3

Thanks,
Cai
> 
>  drivers/dma/dw-edma/Makefile                 |   8 +-
>  drivers/dma/dw-edma/dw-edma-core.c           |  63 ++--
>  drivers/dma/dw-edma/dw-edma-core.h           |  92 ++++++
>  drivers/dma/dw-edma/dw-edma-pcie.c           |   4 +-
>  drivers/dma/dw-edma/dw-edma-v0-core.c        |  88 ++++-
>  drivers/dma/dw-edma/dw-edma-v0-core.h        |  14 +-
>  drivers/dma/dw-edma/dw-hdma-v0-core.c        | 317 +++++++++++++++++++
>  drivers/dma/dw-edma/dw-hdma-v0-core.h        |  17 +
>  drivers/dma/dw-edma/dw-hdma-v0-debugfs.c     | 175 ++++++++++
>  drivers/dma/dw-edma/dw-hdma-v0-debugfs.h     |  22 ++
>  drivers/dma/dw-edma/dw-hdma-v0-regs.h        | 129 ++++++++
>  drivers/pci/controller/dwc/pcie-designware.c |   2 +-
>  include/linux/dma/edma.h                     |   7 +-
>  13 files changed, 860 insertions(+), 78 deletions(-)
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.c
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.h
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.c
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.h
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-regs.h
> 
> -- 
> 2.34.1
>