Re: [PATCH v3 0/4] dmaengine: dw-edma: Add support for native HDMA

[Serge Semin]

Hi Cai

On Thu, Feb 16, 2023 at 10:08:56AM +0800, Cai Huoqing wrote:
> On 13 2月 23 21:24:05, Cai Huoqing wrote:
> > From: Cai huoqing <cai.huoqing@xxxxxxxxx>
> > 
> > Add support for HDMA NATIVE, as long the IP design has set
> > the compatible register map parameter-HDMA_NATIVE,
> > which allows compatibility for native HDMA register configuration.
> > 
> > The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
> > And the native HDMA registers are different from eDMA,
> > so this patch add support for HDMA NATIVE mode.
> > 
> > HDMA write and read channels operate independently to maximize
> > the performance of the HDMA read and write data transfer over
> > the link When you configure the HDMA with multiple read channels,
> > then it uses a round robin (RR) arbitration scheme to select
> > the next read channel to be serviced.
> > The same applies when you have multiple write channels.
> > 
> > The native HDMA driver also supports a maximum of 16 independent
> > channels (8 write + 8 read), which can run simultaneously.
> > Both SAR (Source Address Register) and DAR (Destination Address Register)
> > are alignmented to byte.dmaengine: dw-edma: Add support for native HDMA
> > 
> > Cai huoqing (4):
> >   dmaengine: dw-edma: Rename dw_edma_core_ops structure to
> >     dw_edma_plat_ops
> >   dmaengine: dw-edma: Create a new dw_edma_core_ops structure to
> >     abstract controller operation
> >   dmaengine: dw-edma: Add support for native HDMA
> >   dmaengine: dw-edma: Add HDMA DebugFS support
> > 
> >   v2->v3:
> >     [1/4]
> >     1.Add more commit log to explain why use dw_edma_plat_ops.
> >     2.Update the structure name in the DW PCIe driver.
> >     [2/4]
> >     3.Use the reverse xmas tree vars definition order.
> >     4.Add edma core ops wrapper.
> >     5.Add dw_edma_done_interrupt() and dw_edma_abort_interrupt()
> >       global methods.
> >     6.Fix some indentation.
> >     7.Fix some typo
> >     8.Make use off dw_edma_core prefix instead of dw_xdma_core_.
> >     [3/4]
> >     9.Remove unnecessary include: dw-edma-v0-regs.h and dw-edma-v0-regs.h
> >     10.HDMA supports the LL descriptors placed on the CPU memory.
> >     [4/4]
> >     11.Split DebugFS to be a separate patch.
> >     12.Refactor HDMA DebugFS like the series in @Bjorn tree.
> > 
> >   v2 link:
> >   https://lore.kernel.org/lkml/20220925173412.u2ez6rbmfc5fupdn@mobilestation/

> Hi Sergey,
> 
>   Could you please give some comments for this patch v3

The series has landed in my inbox. I'll give you some comments shortly
today or tomorrow.

-Serge(y)

> 
> Thanks,
> Cai
> > 
> >  drivers/dma/dw-edma/Makefile                 |   8 +-
> >  drivers/dma/dw-edma/dw-edma-core.c           |  63 ++--
> >  drivers/dma/dw-edma/dw-edma-core.h           |  92 ++++++
> >  drivers/dma/dw-edma/dw-edma-pcie.c           |   4 +-
> >  drivers/dma/dw-edma/dw-edma-v0-core.c        |  88 ++++-
> >  drivers/dma/dw-edma/dw-edma-v0-core.h        |  14 +-
> >  drivers/dma/dw-edma/dw-hdma-v0-core.c        | 317 +++++++++++++++++++
> >  drivers/dma/dw-edma/dw-hdma-v0-core.h        |  17 +
> >  drivers/dma/dw-edma/dw-hdma-v0-debugfs.c     | 175 ++++++++++
> >  drivers/dma/dw-edma/dw-hdma-v0-debugfs.h     |  22 ++
> >  drivers/dma/dw-edma/dw-hdma-v0-regs.h        | 129 ++++++++
> >  drivers/pci/controller/dwc/pcie-designware.c |   2 +-
> >  include/linux/dma/edma.h                     |   7 +-
> >  13 files changed, 860 insertions(+), 78 deletions(-)
> >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.c
> >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.h
> >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.c
> >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.h
> >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-regs.h
> > 
> > -- 
> > 2.34.1
> >