Re: [PATCH v1 2/2] mmc: atmel-mci: Convert to agnostic GPIO API
From: Ulf Hansson
Date: Thu Feb 16 2023 - 06:10:31 EST
+ Arnd, Balamanikandan
On Wed, 15 Feb 2023 at 16:53, Andy Shevchenko
<andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>
> The of_gpio.h is going to be removed. In preparation of that convert
> the driver to the agnostic API.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
This is the third attempt to get this done, within this release cycle. :-)
Arnd's:
https://lore.kernel.org/netdev/20230126135034.3320638-1-arnd@xxxxxxxxxx/
Balamanikandan's:
https://lore.kernel.org/all/20221226073908.17317-1-balamanikandan.gunasundar@xxxxxxxxxxxxx/
Actually, Balamanikandan's version was acked already in December by
Linus Walleij and Ludovic, but I failed to apply it so I was
requesting a rebase.
That said, I think we should give BalaBalamanikandan some more time
for a re-spin (unless someone is willing to help him out in this
regard), as it's getting late for v6.3 anyway.
Kind regards
Uffe
> ---
> drivers/mmc/host/atmel-mci.c | 106 ++++++++++++++++-------------------
> 1 file changed, 48 insertions(+), 58 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index fad5e6b4c654..79876e3152e6 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -11,7 +11,7 @@
> #include <linux/dmaengine.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/init.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> @@ -19,7 +19,6 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> -#include <linux/of_gpio.h>
> #include <linux/platform_device.h>
> #include <linux/scatterlist.h>
> #include <linux/seq_file.h>
> @@ -44,8 +43,8 @@
> /**
> * struct mci_slot_pdata - board-specific per-slot configuration
> * @bus_width: Number of data lines wired up the slot
> - * @detect_pin: GPIO pin wired to the card detect switch
> - * @wp_pin: GPIO pin wired to the write protect sensor
> + * @wp_gpio: GPIO pin wired to the write protect sensor
> + * @detect_gpio: GPIO pin wired to the card detect switch
> * @detect_is_active_high: The state of the detect pin when it is active
> * @non_removable: The slot is not removable, only detect once
> *
> @@ -60,8 +59,8 @@
> */
> struct mci_slot_pdata {
> unsigned int bus_width;
> - int detect_pin;
> - int wp_pin;
> + struct gpio_desc *wp_gpio;
> + struct gpio_desc *detect_gpio;
> bool detect_is_active_high;
> bool non_removable;
> };
> @@ -399,12 +398,12 @@ struct atmel_mci {
> * &struct atmel_mci.
> * @clock: Clock rate configured by set_ios(). Protected by host->lock.
> * @flags: Random state bits associated with the slot.
> - * @detect_pin: GPIO pin used for card detection, or negative if not
> - * available.
> - * @wp_pin: GPIO pin used for card write protect sending, or negative
> + * @wp_gpio: GPIO pin used for card write protect sending, or NULL
> * if not available.
> + * @detect_gpio: GPIO pin used for card detection, or negative if not
> + * available.
> * @detect_is_active_high: The state of the detect pin when it is active.
> - * @detect_timer: Timer used for debouncing @detect_pin interrupts.
> + * @detect_timer: Timer used for debouncing @detect_gpio interrupts.
> */
> struct atmel_mci_slot {
> struct mmc_host *mmc;
> @@ -422,8 +421,9 @@ struct atmel_mci_slot {
> #define ATMCI_CARD_NEED_INIT 1
> #define ATMCI_SHUTDOWN 2
>
> - int detect_pin;
> - int wp_pin;
> + struct gpio_desc *wp_gpio;
> +
> + struct gpio_desc *detect_gpio;
> bool detect_is_active_high;
>
> struct timer_list detect_timer;
> @@ -637,7 +637,8 @@ MODULE_DEVICE_TABLE(of, atmci_dt_ids);
> static struct mci_platform_data*
> atmci_of_init(struct platform_device *pdev)
> {
> - struct device_node *np = pdev->dev.of_node;
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> struct device_node *cnp;
> struct mci_platform_data *pdata;
> u32 slot_id;
> @@ -669,8 +670,10 @@ atmci_of_init(struct platform_device *pdev)
> &pdata->slot[slot_id].bus_width))
> pdata->slot[slot_id].bus_width = 1;
>
> - pdata->slot[slot_id].detect_pin =
> - of_get_named_gpio(cnp, "cd-gpios", 0);
> + pdata->slot[slot_id].detect_gpio = devm_gpiod_get_optional(dev, "cd", GPIOD_IN);
> + if (!pdata->slot[slot_id].detect_gpio)
> + dev_dbg(dev, "no detect pin available\n");
> + gpiod_set_consumer_name(pdata->slot[slot_id].detect_gpio, "mmc_detect");
>
> pdata->slot[slot_id].detect_is_active_high =
> of_property_read_bool(cnp, "cd-inverted");
> @@ -678,8 +681,10 @@ atmci_of_init(struct platform_device *pdev)
> pdata->slot[slot_id].non_removable =
> of_property_read_bool(cnp, "non-removable");
>
> - pdata->slot[slot_id].wp_pin =
> - of_get_named_gpio(cnp, "wp-gpios", 0);
> + pdata->slot[slot_id].wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_IN);
> + if (!pdata->slot[slot_id].wp_gpio)
> + dev_dbg(dev, "no WP pin available\n");
> + gpiod_set_consumer_name(pdata->slot[slot_id].wp_gpio, "mmc_wp");
> }
>
> return pdata;
> @@ -1535,8 +1540,8 @@ static int atmci_get_ro(struct mmc_host *mmc)
> int read_only = -ENOSYS;
> struct atmel_mci_slot *slot = mmc_priv(mmc);
>
> - if (gpio_is_valid(slot->wp_pin)) {
> - read_only = gpio_get_value(slot->wp_pin);
> + if (slot->wp_gpio) {
> + read_only = gpiod_get_value(slot->wp_gpio);
> dev_dbg(&mmc->class_dev, "card is %s\n",
> read_only ? "read-only" : "read-write");
> }
> @@ -1544,14 +1549,18 @@ static int atmci_get_ro(struct mmc_host *mmc)
> return read_only;
> }
>
> +static bool is_card_present(struct atmel_mci_slot *slot)
> +{
> + return !(gpiod_get_raw_value(slot->detect_gpio) ^ slot->detect_is_active_high);
> +}
> +
> static int atmci_get_cd(struct mmc_host *mmc)
> {
> int present = -ENOSYS;
> struct atmel_mci_slot *slot = mmc_priv(mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> - present = !(gpio_get_value(slot->detect_pin) ^
> - slot->detect_is_active_high);
> + if (slot->detect_gpio) {
> + present = is_card_present(slot);
> dev_dbg(&mmc->class_dev, "card is %spresent\n",
> present ? "" : "not ");
> }
> @@ -1663,9 +1672,8 @@ static void atmci_detect_change(struct timer_list *t)
> if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
> return;
>
> - enable_irq(gpio_to_irq(slot->detect_pin));
> - present = !(gpio_get_value(slot->detect_pin) ^
> - slot->detect_is_active_high);
> + enable_irq(gpiod_to_irq(slot->detect_gpio));
> + present = is_card_present(slot);
> present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
>
> dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
> @@ -2254,18 +2262,18 @@ static int atmci_init_slot(struct atmel_mci *host,
> slot = mmc_priv(mmc);
> slot->mmc = mmc;
> slot->host = host;
> - slot->detect_pin = slot_data->detect_pin;
> - slot->wp_pin = slot_data->wp_pin;
> + slot->wp_gpio = slot_data->wp_gpio;
> + slot->detect_gpio = slot_data->detect_gpio;
> slot->detect_is_active_high = slot_data->detect_is_active_high;
> slot->sdc_reg = sdc_reg;
> slot->sdio_irq = sdio_irq;
>
> dev_dbg(&mmc->class_dev,
> - "slot[%u]: bus_width=%u, detect_pin=%d, "
> - "detect_is_active_high=%s, wp_pin=%d\n",
> - id, slot_data->bus_width, slot_data->detect_pin,
> + "slot[%u]: bus_width=%u, detect_gpio=%d, "
> + "detect_is_active_high=%s, wp_gpio=%d\n",
> + id, slot_data->bus_width, desc_to_gpio(slot_data->detect_gpio),
> slot_data->detect_is_active_high ? "true" : "false",
> - slot_data->wp_pin);
> + desc_to_gpio(slot_data->wp_gpio));
>
> mmc->ops = &atmci_ops;
> mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
> @@ -2301,32 +2309,16 @@ static int atmci_init_slot(struct atmel_mci *host,
>
> /* Assume card is present initially */
> set_bit(ATMCI_CARD_PRESENT, &slot->flags);
> - if (gpio_is_valid(slot->detect_pin)) {
> - if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
> - "mmc_detect")) {
> - dev_dbg(&mmc->class_dev, "no detect pin available\n");
> - slot->detect_pin = -EBUSY;
> - } else if (gpio_get_value(slot->detect_pin) ^
> - slot->detect_is_active_high) {
> + if (slot->detect_gpio) {
> + if (!is_card_present(slot))
> clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
> - }
> - }
> -
> - if (!gpio_is_valid(slot->detect_pin)) {
> + } else {
> if (slot_data->non_removable)
> mmc->caps |= MMC_CAP_NONREMOVABLE;
> else
> mmc->caps |= MMC_CAP_NEEDS_POLL;
> }
>
> - if (gpio_is_valid(slot->wp_pin)) {
> - if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
> - "mmc_wp")) {
> - dev_dbg(&mmc->class_dev, "no WP pin available\n");
> - slot->wp_pin = -EBUSY;
> - }
> - }
> -
> host->slot[id] = slot;
> mmc_regulator_get_supply(mmc);
> ret = mmc_add_host(mmc);
> @@ -2335,18 +2327,18 @@ static int atmci_init_slot(struct atmel_mci *host,
> return ret;
> }
>
> - if (gpio_is_valid(slot->detect_pin)) {
> + if (slot->detect_gpio) {
> timer_setup(&slot->detect_timer, atmci_detect_change, 0);
>
> - ret = request_irq(gpio_to_irq(slot->detect_pin),
> + ret = request_irq(gpiod_to_irq(slot->detect_gpio),
> atmci_detect_interrupt,
> IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> "mmc-detect", slot);
> if (ret) {
> dev_dbg(&mmc->class_dev,
> "could not request IRQ %d for detect pin\n",
> - gpio_to_irq(slot->detect_pin));
> - slot->detect_pin = -EBUSY;
> + gpiod_to_irq(slot->detect_gpio));
> + slot->detect_gpio = NULL;
> }
> }
>
> @@ -2365,10 +2357,8 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
>
> mmc_remove_host(slot->mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> - int pin = slot->detect_pin;
> -
> - free_irq(gpio_to_irq(pin), slot);
> + if (slot->detect_gpio) {
> + free_irq(gpiod_to_irq(slot->detect_gpio), slot);
> del_timer_sync(&slot->detect_timer);
> }
>
> --
> 2.39.1
>