[PATCH v1 9/9] soc: mediatek: Cleanup ifdefs for IS_REACHABLE(CONFIG_MTK_CMDQ)
From: AngeloGioacchino Del Regno
Date: Thu Feb 16 2023 - 08:00:59 EST
Now that the mtk-cmdq.h header contains inline functions for cases
in which the driver is not enabled (either module or built-in), we
can safely go on with cleaning up ifdefs for CMDQ handling.
This also shows in a clearer manner that writing through CMDQ HW is
optional and used only for performance purposes when/where wanted,
needed and/or required.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
drivers/soc/mediatek/mtk-mmsys.c | 22 +++++++++-------------
drivers/soc/mediatek/mtk-mutex.c | 15 +++------------
2 files changed, 12 insertions(+), 25 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 0f0fa27e17a5..8da5c8d26ed0 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -131,21 +131,18 @@ struct mtk_mmsys {
static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
struct cmdq_pkt *cmdq_pkt)
{
+ int ret;
u32 tmp;
-#if IS_REACHABLE(CONFIG_MTK_CMDQ)
- if (cmdq_pkt) {
- if (mmsys->cmdq_base.size == 0) {
- pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+ if (mmsys->cmdq_base.size && cmdq_pkt) {
+ ret = cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+ mmsys->cmdq_base.offset + offset, val,
+ mask);
+ if (ret)
+ pr_debug("CMDQ unavailable: using CPU write\n");
+ else
return;
- }
- cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
- mmsys->cmdq_base.offset + offset, val,
- mask);
- return;
}
-#endif
-
tmp = readl_relaxed(mmsys->regs + offset);
tmp = (tmp & ~mask) | (val & mask);
writel_relaxed(tmp, mmsys->regs + offset);
@@ -332,11 +329,10 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
}
}
-#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+ /* CMDQ is optional */
ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
if (ret)
dev_dbg(dev, "No mediatek,gce-client-reg!\n");
-#endif
platform_set_drvdata(pdev, mmsys);
diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index 07eff509580a..78c04cc5457a 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -770,23 +770,18 @@ int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, void *pkt)
{
struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
mutex[mutex->id]);
-#if IS_REACHABLE(CONFIG_MTK_CMDQ)
struct cmdq_pkt *cmdq_pkt = (struct cmdq_pkt *)pkt;
WARN_ON(&mtx->mutex[mutex->id] != mutex);
if (!mtx->cmdq_reg.size) {
dev_err(mtx->dev, "mediatek,gce-client-reg hasn't been set");
- return -EINVAL;
+ return -ENODEV;
}
cmdq_pkt_write(cmdq_pkt, mtx->cmdq_reg.subsys,
mtx->addr + DISP_REG_MUTEX_EN(mutex->id), 1);
return 0;
-#else
- dev_err(mtx->dev, "Not support for enable MUTEX by CMDQ");
- return -ENODEV;
-#endif
}
EXPORT_SYMBOL_GPL(mtk_mutex_enable_by_cmdq);
@@ -881,10 +876,7 @@ static int mtk_mutex_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct mtk_mutex_ctx *mtx;
struct resource *regs;
- int i;
-#if IS_REACHABLE(CONFIG_MTK_CMDQ)
- int ret;
-#endif
+ int i, ret;
mtx = devm_kzalloc(dev, sizeof(*mtx), GFP_KERNEL);
if (!mtx)
@@ -911,11 +903,10 @@ static int mtk_mutex_probe(struct platform_device *pdev)
}
mtx->addr = regs->start;
-#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+ /* CMDQ is optional */
ret = cmdq_dev_get_client_reg(dev, &mtx->cmdq_reg, 0);
if (ret)
dev_dbg(dev, "No mediatek,gce-client-reg!\n");
-#endif
platform_set_drvdata(pdev, mtx);
--
2.39.1