[PATCH 2/3] mfd: tqmx86: specify IO port register range more precisely

[Matthias Schiffer]

Registers 0x160..0x17f are unassigned. Use 0x180 as base register and
update offets accordingly.

Also change the size of the range to include 0x19f. While 0x19f is
currently reserved for future extensions, so are several of the previous
registers up to 0x19e, and it is weird to leave out just the last one.

Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
---
 drivers/mfd/tqmx86.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index 8dcbdafa88f4f..1957db881c3a1 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -16,8 +16,8 @@
 #include <linux/platform_data/i2c-ocores.h>
 #include <linux/platform_device.h>
 
-#define TQMX86_IOBASE	0x160
-#define TQMX86_IOSIZE	0x3f
+#define TQMX86_IOBASE	0x180
+#define TQMX86_IOSIZE	0x20
 #define TQMX86_IOBASE_I2C	0x1a0
 #define TQMX86_IOSIZE_I2C	0xa
 #define TQMX86_IOBASE_WATCHDOG	0x18b
@@ -25,7 +25,7 @@
 #define TQMX86_IOBASE_GPIO	0x18d
 #define TQMX86_IOSIZE_GPIO	0x4
 
-#define TQMX86_REG_BOARD_ID	0x20
+#define TQMX86_REG_BOARD_ID	0x00
 #define TQMX86_REG_BOARD_ID_E38M	1
 #define TQMX86_REG_BOARD_ID_50UC	2
 #define TQMX86_REG_BOARD_ID_E38C	3
@@ -40,8 +40,8 @@
 #define TQMX86_REG_BOARD_ID_E40S	13
 #define TQMX86_REG_BOARD_ID_E40C1	14
 #define TQMX86_REG_BOARD_ID_E40C2	15
-#define TQMX86_REG_BOARD_REV	0x21
-#define TQMX86_REG_IO_EXT_INT	0x26
+#define TQMX86_REG_BOARD_REV	0x01
+#define TQMX86_REG_IO_EXT_INT	0x06
 #define TQMX86_REG_IO_EXT_INT_NONE		0
 #define TQMX86_REG_IO_EXT_INT_7			1
 #define TQMX86_REG_IO_EXT_INT_9			2
-- 
2.34.1