The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.
Fixes: 95acd4c7b69c ("nios2: Device tree support")
Fixes: 61c610ec61bb ("nios2: Add Max10 device tree")
Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
---
arch/nios2/boot/dts/10m50_devboard.dts | 2 +-
arch/nios2/boot/dts/3c120_devboard.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts
index 56339bef3247..0e7e5b0dd685 100644
--- a/arch/nios2/boot/dts/10m50_devboard.dts
+++ b/arch/nios2/boot/dts/10m50_devboard.dts
@@ -97,7 +97,7 @@ rgmii_0_eth_tse_0: ethernet@400 {
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
address-bits = <48>;
- max-frame-size = <1518>;
+ max-frame-size = <1500>;
local-mac-address = [00 00 00 00 00 00];
altr,has-supplementary-unicast;
altr,enable-sup-addr = <1>;
diff --git a/arch/nios2/boot/dts/3c120_devboard.dts b/arch/nios2/boot/dts/3c120_devboard.dts
index d10fb81686c7..3ee316906379 100644
--- a/arch/nios2/boot/dts/3c120_devboard.dts
+++ b/arch/nios2/boot/dts/3c120_devboard.dts
@@ -106,7 +106,7 @@ tse_mac: ethernet@4000 {
interrupt-names = "rx_irq", "tx_irq";
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
- max-frame-size = <1518>;
+ max-frame-size = <1500>;
local-mac-address = [ 00 00 00 00 00 00 ];
phy-mode = "rgmii-id";
phy-handle = <&phy0>;