Re: [PATCH v3 3/3] dt-bindings: misc: servo-pwm: Add new bindings for servo-pwm

[Krzysztof Kozlowski]

On 17/02/2023 17:10, Angelo Compagnucci wrote:
> This binding describes the binding for controlling servo motors through
> pwm.
> 
> Signed-off-by: Angelo Compagnucci <angelo@xxxxxxxxxxxxxxxxxxxx>
> ---
> v2:
> * Converted old txt to yaml
> v3:
> * Fixed errors rised by make dt_binding_check 

Still fails the tests.

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

> 
>  .../devicetree/bindings/misc/servo-pwm.yaml   | 57 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/servo-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/misc/servo-pwm.yaml b/Documentation/devicetree/bindings/misc/servo-pwm.yaml
> new file mode 100644
> index 000000000000..73e81b939daf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/servo-pwm.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/servo-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Servo motor connected to PWM
> +
> +maintainers:
> +  - Angelo Compagnucci <angelo@xxxxxxxxxxxxxxxxxxxx>
> +
> +description:
> +  Each servo is represented as a servo-pwm device.
> +  The 20ms period is the accepted standard and so most of the motors
> +  support it, while the positioning min/max duty cycle or the motor
> +  degrees aperture vary lot between manufacturers.
> +  The most common type of servo (SG90) has 180 degrees of movement
> +  and moves between 0.5ms and 2.5ms duty cycle.
> +
> +properties:
> +  compatible:
> +    const: servo-pwm
> +
> +  pwms:
> +    maxItems: 1
> +
> +  pwm-names: true

You got later feedback from Rob for v2, so this needs changes.

> +
> +  degrees:
> +    description:
> +      How many degrees the motor can move.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  duty-min:
> +    description:
> +      Duty cycle for position the motor at 0 degrees.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  duty-max:
> +    description:
> +      Duty cycle for positioning the motor at "degrees" angle.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +

Drop blank line.

Krzysztof