[PATCH 13/18] pata_parport: simplify log_adapter prints, remove VERSION defines

From: Ondrej Zary
Date: Sat Feb 18 2023 - 17:03:01 EST

Next message: Ondrej Zary: "[PATCH 11/18] pata_parport: use dev_* instead of printk"
Previous message: Ondrej Zary: "[PATCH 12/18] pata_parport: use print_hex_*"
In reply to: Sergey Shtylyov: "Re: [PATCH 12/18] pata_parport: use print_hex_*"
Next in thread: Ondrej Zary: "[PATCH 11/18] pata_parport: use dev_* instead of printk"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Merge log_adapter prints to single one, remove version print and
meaningless VERSION defines.

Reviewed-by: Sergey Shtylyov <s.shtylyov@xxxxxx>
Signed-off-by: Ondrej Zary <linux@xxxxxxx>
---
drivers/ata/pata_parport/aten.c | 8 ++------
drivers/ata/pata_parport/bpck.c | 9 +++------
drivers/ata/pata_parport/bpck6.c | 9 ++-------
drivers/ata/pata_parport/comm.c | 8 ++------
drivers/ata/pata_parport/dstr.c | 8 ++------
drivers/ata/pata_parport/epat.c | 9 ++-------
drivers/ata/pata_parport/epia.c | 8 ++------
drivers/ata/pata_parport/fit2.c | 6 ++----
drivers/ata/pata_parport/fit3.c | 9 ++-------
drivers/ata/pata_parport/friq.c | 8 ++------
drivers/ata/pata_parport/frpw.c | 10 +++-------
drivers/ata/pata_parport/kbic.c | 8 ++------
drivers/ata/pata_parport/ktti.c | 7 ++-----
drivers/ata/pata_parport/on20.c | 8 ++------
drivers/ata/pata_parport/on26.c | 8 ++------
15 files changed, 32 insertions(+), 91 deletions(-)

diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index ccbba14ccab1..8995a4a08b76 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -15,8 +15,6 @@

*/

-#define ATEN_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -124,10 +122,8 @@ static void aten_log_adapter(struct pi_adapter *pi)

{ char *mode_string[2] = {"4-bit","8-bit"};

- dev_info(&pi->dev, "aten %s, ATEN EH-100 at 0x%x, ", ATEN_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol aten = {
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index dec24983d140..793ef2c7849e 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -14,8 +14,6 @@

*/

-#define BPCK_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -421,10 +419,9 @@ static void bpck_log_adapter(struct pi_adapter *pi)

bpck_read_eeprom(pi,scratch);
print_hex_dump_bytes("bpck EEPROM: ", DUMP_PREFIX_NONE, scratch, 128);
- dev_info(&pi->dev, "bpck %s, backpack %8.8s unit %d",
- BPCK_VERSION, &scratch[110], pi->unit);
- dev_info(&pi->dev, " at 0x%x, mode %d (%s), delay %d\n", pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
+ &scratch[110], pi->unit, pi->port, pi->mode,
+ mode_string[pi->mode], pi->delay);
}

static struct pi_protocol bpck = {
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 4770e29bfdeb..f144e1b3cacb 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -19,9 +19,6 @@
Version 2.0.2 - fixed version string usage, and made ppc functions static
*/

-
-#define BACKPACK_VERSION "2.0.2"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -179,10 +176,8 @@ static void bpck6_log_adapter(struct pi_adapter *pi)
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};

- dev_info(&pi->dev, "BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
- BACKPACK_VERSION, pi->port);
- dev_info(&pi->dev, "Unit: %d Mode:%d (%s) Delay %d\n",
- pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "Micro Solutions BACKPACK Drive unit %d at 0x%x, mode:%d (%s), delay %d\n",
+ pi->unit, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static int bpck6_init_proto(struct pi_adapter *pi)
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 7b59eca52185..6e05b50c322c 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -14,8 +14,6 @@

*/

-#define COMM_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -183,10 +181,8 @@ static void comm_log_adapter(struct pi_adapter *pi)

{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};

- dev_info(&pi->dev, "comm %s, DataStor Commuter at 0x%x, ", COMM_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol comm = {
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index eb6ddceaeb83..64e45eed9588 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -13,8 +13,6 @@

*/

-#define DSTR_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -195,10 +193,8 @@ static void dstr_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};

- dev_info(&pi->dev, "dstr %s, DataStor EP2000 at 0x%x, ", DSTR_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol dstr = {
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 389faa6ae49d..12dd53a06dd0 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -16,8 +16,6 @@

*/

-#define EPAT_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -296,11 +294,8 @@ static void epat_log_adapter(struct pi_adapter *pi)
ver = RR(0xb);
epat_disconnect(pi);

- dev_info(&pi->dev, "epat %s, Shuttle EPAT chip %x at 0x%x, ",
- EPAT_VERSION, ver, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Shuttle EPAT chip %x at 0x%x, mode %d (%s), delay %d\n",
+ ver, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol epat = {
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 48d12f56c501..1216763d0c6d 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -17,8 +17,6 @@

*/

-#define EPIA_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -275,10 +273,8 @@ static void epia_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};

- dev_info(&pi->dev, "epia %s, Shuttle EPIA at 0x%x, ", EPIA_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Shuttle EPIA at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol epia = {
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index d0a781f04411..3536d8c07955 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -13,8 +13,6 @@

*/

-#define FIT2_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -116,8 +114,8 @@ static void fit2_disconnect(struct pi_adapter *pi)
static void fit2_log_adapter(struct pi_adapter *pi)

{
- dev_info(&pi->dev, "fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
- FIT2_VERSION, pi->port, pi->delay);
+ dev_info(&pi->dev, "FIT 2000 adapter at 0x%x, delay %d\n",
+ pi->port, pi->delay);

}

diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index f86da2d478cb..9f5320c750e2 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -17,8 +17,6 @@

*/

-#define FIT3_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -173,11 +171,8 @@ static void fit3_log_adapter(struct pi_adapter *pi)

{ char *mode_string[3] = {"4-bit","8-bit","EPP"};

- dev_info(&pi->dev, "fit3 %s, FIT 3000 adapter at 0x%x, "
- "mode %d (%s), delay %d\n",
- FIT3_VERSION, pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "FIT 3000 adapter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol fit3 = {
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index ec564e7cb930..ed05e6503147 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -25,8 +25,6 @@
1.01 GRG 1998.12.20 Added support for soft power switch
*/

-#define FRIQ_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -219,10 +217,8 @@ static void friq_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};

- dev_info(&pi->dev, "friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ",
- FRIQ_VERSION,pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);

pi->private = 1;
friq_connect(pi);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 5ea16a247257..c0d50e2ed57d 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -23,8 +23,6 @@

*/

-#define FRPW_VERSION "1.03"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -268,11 +266,9 @@ static void frpw_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};

- dev_info(&pi->dev, "frpw %s, Freecom (%s) adapter at 0x%x, ",
- FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
+ ((pi->private % 2) == 0) ? "Xilinx" : "ASIC",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol frpw = {
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index ea1b931ce20d..3fab7a896e79 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -18,8 +18,6 @@

*/

-#define KBIC_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -234,10 +232,8 @@ static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};

- dev_info(&pi->dev, "kbic %s, KingByte %s at 0x%x, ", KBIC_VERSION, chip, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "KingByte %s at 0x%x, mode %d (%s), delay %d\n",
+ chip, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static void k951_log_adapter(struct pi_adapter *pi)
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index b22c283709de..742051f6ea10 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -9,8 +9,6 @@

*/

-#define KTTI_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -93,9 +91,8 @@ static void ktti_disconnect(struct pi_adapter *pi)
static void ktti_log_adapter(struct pi_adapter *pi)

{
- dev_info(&pi->dev, "ktti %s, KT adapter at 0x%x, delay %d\n",
- KTTI_VERSION, pi->port, pi->delay);
-
+ dev_info(&pi->dev, "KT adapter at 0x%x, delay %d\n",
+ pi->port, pi->delay);
}

static struct pi_protocol ktti = {
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index c76d4fb84c61..9cc8be9fa562 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -12,8 +12,6 @@

*/

-#define ON20_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -115,10 +113,8 @@ static void on20_log_adapter(struct pi_adapter *pi)

{ char *mode_string[2] = {"4-bit","8-bit"};

- dev_info(&pi->dev, "on20 %s, OnSpec 90c20 at 0x%x, ", ON20_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "OnSpec 90c20 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol on20 = {
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 5406e76ea727..e37f69db5f76 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -16,8 +16,6 @@

*/

-#define ON26_VERSION "1.04"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -280,10 +278,8 @@ static void on26_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};

- dev_info(&pi->dev, "on26 %s, OnSpec 90c26 at 0x%x, ", ON26_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}

static struct pi_protocol on26 = {
--
Ondrej Zary

Next message: Ondrej Zary: "[PATCH 11/18] pata_parport: use dev_* instead of printk"
Previous message: Ondrej Zary: "[PATCH 12/18] pata_parport: use print_hex_*"
In reply to: Sergey Shtylyov: "Re: [PATCH 12/18] pata_parport: use print_hex_*"
Next in thread: Ondrej Zary: "[PATCH 11/18] pata_parport: use dev_* instead of printk"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]