Re: [PATCH v2 08/18] can: m_can: Write transmit header and data in one transaction
From: Markus Schneider-Pargmann
Date: Mon Feb 20 2023 - 00:31:25 EST
Hi Simon,
On Sat, Feb 04, 2023 at 02:05:57PM +0100, Simon Horman wrote:
> On Mon, Jan 30, 2023 at 09:04:19AM +0100, Markus Schneider-Pargmann wrote:
> > Hi Simon,
> >
> > On Thu, Jan 26, 2023 at 09:04:56AM +0100, Simon Horman wrote:
> > > On Wed, Jan 25, 2023 at 08:50:49PM +0100, Markus Schneider-Pargmann wrote:
> > > > Combine header and data before writing to the transmit fifo to reduce
> > > > the overhead for peripheral chips.
> > > >
> > > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> > > > ---
> > > > drivers/net/can/m_can/m_can.c | 10 +++++-----
> > > > 1 file changed, 5 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> > > > index 78f6ed744c36..440bc0536951 100644
> > > > --- a/drivers/net/can/m_can/m_can.c
> > > > +++ b/drivers/net/can/m_can/m_can.c
> > > > @@ -1681,6 +1681,7 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
> > > > m_can_write(cdev, M_CAN_TXBAR, 0x1);
> > > > /* End of xmit function for version 3.0.x */
> > > > } else {
> > > > + char buf[TXB_ELEMENT_SIZE];
> > > > /* Transmit routine for version >= v3.1.x */
> > > >
> > > > txfqs = m_can_read(cdev, M_CAN_TXFQS);
> > > > @@ -1720,12 +1721,11 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
> > > > fifo_header.dlc = FIELD_PREP(TX_BUF_MM_MASK, putidx) |
> > > > FIELD_PREP(TX_BUF_DLC_MASK, can_fd_len2dlc(cf->len)) |
> > > > fdflags | TX_BUF_EFC;
> > > > - err = m_can_fifo_write(cdev, putidx, M_CAN_FIFO_ID, &fifo_header, 2);
> > > > - if (err)
> > > > - goto out_fail;
> > > > + memcpy(buf, &fifo_header, 8);
> > > > + memcpy(&buf[8], &cf->data, cf->len);
> > > >
> > > > - err = m_can_fifo_write(cdev, putidx, M_CAN_FIFO_DATA,
> > > > - cf->data, DIV_ROUND_UP(cf->len, 4));
> > > > + err = m_can_fifo_write(cdev, putidx, M_CAN_FIFO_ID,
> > > > + buf, 8 + DIV_ROUND_UP(cf->len, 4));
> > >
> > > Perhaps I am missing something here, but my reading is that:
> > >
> > > - 8 is a length in bytes
> > > - the 5th argument to m_can_fifo_write is the val_count parameter,
> > > whose unit is 4-byte long values.
> > >
> > > By this logic, perhaps the correct value for this argument is:
> > >
> > > DIV_ROUND_UP(8 + cf->len, 4)
> >
> > Thank you for spotting this. You are totally right, I will fix it for
> > the next version.
>
> Thanks.
>
> > > Also:
> > >
> > > - If cf->len is not a multiple of 4, is there a possibility
> > > that uninitialised trailing data in buf will be used
> > > indirectly by m_can_fifo_write()?
> >
> > Good point. I think this can only happen for 1, 2, 3, 5, 6, 7 bytes,
> > values above have to be multiple of 4 because of the CAN-FD
> > specification.
> >
> > With 'buf' it should read garbage from the buffer which I think is not a
> > problem as the chip knows how much of the data to use. Also the tx
> > elemnt size is hardcoded to 64 byte in the driver, so we do not overwrite
> > the next element with that. The chip minimum size is 8 bytes for the
> > data field anyways. So I think this is fine.
>
> I'm not the expert on the hw in question here, but intuitively
> I do feel that it may be unwise to send uninitialised data.
> While I'm happy to defer to you on this, I do wonder if it would be somehow
> better to use memcpy_and_pad() in place of memcpy().
Thank you, I think it is safe, but memcpy_and_pad seems like a good
solution here to make it even safer.
Best,
Markus