Re: [PATCH] dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema

[Krzysztof Kozlowski]

On 18/02/2023 13:22, Keguang Zhang wrote:
> Convert the Loongson1 interrupt controller dt-bindings to json-schema.
> 
> Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
> ---
>  .../loongson,ls1x-intc.txt                    | 24 ---------
>  .../loongson,ls1x-intc.yaml                   | 51 +++++++++++++++++++
>  2 files changed, 51 insertions(+), 24 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> deleted file mode 100644
> index a63ed9fcb535..000000000000
> --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -Loongson ls1x Interrupt Controller
> -
> -Required properties:
> -
> -- compatible : should be "loongson,ls1x-intc". Valid strings are:
> -
> -- reg : Specifies base physical address and size of the registers.
> -- interrupt-controller : Identifies the node as an interrupt controller
> -- #interrupt-cells : Specifies the number of cells needed to encode an
> -  interrupt source. The value shall be 2.
> -- interrupts : Specifies the CPU interrupt the controller is connected to.
> -
> -Example:
> -
> -intc: interrupt-controller@1fd01040 {
> -	compatible = "loongson,ls1x-intc";
> -	reg = <0x1fd01040 0x18>;
> -
> -	interrupt-controller;
> -	#interrupt-cells = <2>;
> -
> -	interrupt-parent = <&cpu_intc>;
> -	interrupts = <2>;
> -};
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> new file mode 100644
> index 000000000000..4cea3ee9fbb1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1 Interrupt Controller

You changed the title, so this binding now will cover all Loonson-1
interrupt controllers?

> +
> +maintainers:
> +  - Keguang Zhang <keguang.zhang@xxxxxxxxx>
> +
> +description: |

Drop |

> +  Loongson-1 interrupt controller is connected to the MIPS core interrupt
> +  controller, which controls several groups of interrupts.
> +


Best regards,
Krzysztof