Re: [PATCH v3 2/4] dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
From: Serge Semin
Date: Mon Feb 20 2023 - 05:52:28 EST
On Mon, Feb 20, 2023 at 02:01:50PM +0800, Cai Huoqing wrote:
> Hi Serge, thanks for your reply.
>
> On 16 2月 23 19:17:17, Serge Semin wrote:
> > On Mon, Feb 13, 2023 at 09:24:07PM +0800, Cai Huoqing wrote:
> > > From: Cai huoqing <cai.huoqing@xxxxxxxxx>
> > >
> > > The structure dw_edma_core_ops has a set of the pointers
> > > abstracting out the DW eDMA vX and DW HDMA Native controllers.
> > > And use dw_edma_v0_core_register to set up operation.
> > >
> > > Signed-off-by: Cai huoqing <cai.huoqing@xxxxxxxxx>
> > > ---
> > > drivers/dma/dw-edma/dw-edma-core.c | 63 ++++++------------
> > > drivers/dma/dw-edma/dw-edma-core.h | 92 +++++++++++++++++++++++++++
> > > drivers/dma/dw-edma/dw-edma-v0-core.c | 88 +++++++++++++++++++++----
> > > drivers/dma/dw-edma/dw-edma-v0-core.h | 14 +---
> > > 4 files changed, 188 insertions(+), 69 deletions(-)
> > >
> > > diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> > > index 1906a836f0aa..c171809beba1 100644
> > > --- a/drivers/dma/dw-edma/dw-edma-core.c
> > > +++ b/drivers/dma/dw-edma/dw-edma-core.c
> > > @@ -183,6 +183,7 @@ static void vchan_free_desc(struct virt_dma_desc *vdesc)
> > >
> > > static void dw_edma_start_transfer(struct dw_edma_chan *chan)
> > > {
> > > + struct dw_edma *dw = chan->dw;
> > > struct dw_edma_chunk *child;
> > > struct dw_edma_desc *desc;
> > > struct virt_dma_desc *vd;
> > > @@ -200,7 +201,7 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan)
> > > if (!child)
> > > return;
> > >
> > > - dw_edma_v0_core_start(child, !desc->xfer_sz);
> > > + dw_edma_core_start(dw, child, !desc->xfer_sz);
> > > desc->xfer_sz += child->ll_region.sz;
> > > dw_edma_free_burst(child);
> > > list_del(&child->list);
> > > @@ -285,7 +286,7 @@ static int dw_edma_device_terminate_all(struct dma_chan *dchan)
> > > chan->configured = false;
> > > } else if (chan->status == EDMA_ST_IDLE) {
> > > chan->configured = false;
> > > - } else if (dw_edma_v0_core_ch_status(chan) == DMA_COMPLETE) {
> > > + } else if (dw_edma_core_ch_status(chan) == DMA_COMPLETE) {
> > > /*
> > > * The channel is in a false BUSY state, probably didn't
> > > * receive or lost an interrupt
> > > @@ -588,13 +589,13 @@ dw_edma_device_prep_interleaved_dma(struct dma_chan *dchan,
> > > return dw_edma_device_transfer(&xfer);
> > > }
> > >
> > > -static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> > > +void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> > > {
> > > struct dw_edma_desc *desc;
> > > struct virt_dma_desc *vd;
> > > unsigned long flags;
> > >
> >
> > > - dw_edma_v0_core_clear_done_int(chan);
> > > + dw_edma_core_clear_done_int(chan); <+
> > |
> > As I already said in v2 just call this method + in the IRQ-handle loop
> > within the IP-core-specific module (see further for details). Thus you'll
> > be able to drop the dw_edma_core_ops.clear_done_int pointer. The same
> > concerns the dw_edma_core_ops.clear_abort_int callback.
> >
> > >
> > > spin_lock_irqsave(&chan->vc.lock, flags);
> > > vd = vchan_next_desc(&chan->vc);
> > > @@ -631,12 +632,12 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> > > spin_unlock_irqrestore(&chan->vc.lock, flags);
> > > }
> > >
> > > -static void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> > > +void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> > > {
> > > struct virt_dma_desc *vd;
> > > unsigned long flags;
> > >
> >
> > > - dw_edma_v0_core_clear_abort_int(chan);
> > > + dw_edma_core_clear_abort_int(chan);
> >
> > ditto
> >
> > >
> > > spin_lock_irqsave(&chan->vc.lock, flags);
> > > vd = vchan_next_desc(&chan->vc);
> > > @@ -651,41 +652,11 @@ static void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> > >
> > > static irqreturn_t dw_edma_interrupt(int irq, void *data, bool write)
> > > {
> > > + enum dw_edma_dir dir = write ? EDMA_DIR_WRITE : EDMA_DIR_READ;
> > > struct dw_edma_irq *dw_irq = data;
> > > - struct dw_edma *dw = dw_irq->dw;
> > > - unsigned long total, pos, val;
> > > - unsigned long off;
> > > - u32 mask;
> > > -
> > > - if (write) {
> > > - total = dw->wr_ch_cnt;
> > > - off = 0;
> > > - mask = dw_irq->wr_mask;
> > > - } else {
> > > - total = dw->rd_ch_cnt;
> > > - off = dw->wr_ch_cnt;
> > > - mask = dw_irq->rd_mask;
> > > - }
> > > -
> > > - val = dw_edma_v0_core_status_done_int(dw, write ?
> > > - EDMA_DIR_WRITE :
> > > - EDMA_DIR_READ);
> > > - val &= mask;
> > > - for_each_set_bit(pos, &val, total) {
> > > - struct dw_edma_chan *chan = &dw->chan[pos + off];
> > > -
> > > - dw_edma_done_interrupt(chan);
> > > - }
> > > -
> > > - val = dw_edma_v0_core_status_abort_int(dw, write ?
> > > - EDMA_DIR_WRITE :
> > > - EDMA_DIR_READ);
> > > - val &= mask;
> > > - for_each_set_bit(pos, &val, total) {
> > > - struct dw_edma_chan *chan = &dw->chan[pos + off];
> > >
> > > - dw_edma_abort_interrupt(chan);
> > > - }
> > > + dw_edma_core_done_handle(dw_irq, dir);
> > > + dw_edma_core_abort_handle(dw_irq, dir);
> > >
> > > return IRQ_HANDLED;
> > > }
> > > @@ -806,7 +777,7 @@ static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
> > >
> > > vchan_init(&chan->vc, dma);
> > >
> > > - dw_edma_v0_core_device_config(chan);
> > > + dw_edma_core_ch_config(chan);
> > > }
> > >
> > > /* Set DMA channel capabilities */
> > > @@ -951,14 +922,16 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> > >
> > > dw->chip = chip;
> > >
> > > + dw_edma_v0_core_register(dw);
> > > +
> > > raw_spin_lock_init(&dw->lock);
> > >
> > > dw->wr_ch_cnt = min_t(u16, chip->ll_wr_cnt,
> > > - dw_edma_v0_core_ch_count(dw, EDMA_DIR_WRITE));
> > > + dw_edma_core_ch_count(dw, EDMA_DIR_WRITE));
> > > dw->wr_ch_cnt = min_t(u16, dw->wr_ch_cnt, EDMA_MAX_WR_CH);
> > >
> > > dw->rd_ch_cnt = min_t(u16, chip->ll_rd_cnt,
> > > - dw_edma_v0_core_ch_count(dw, EDMA_DIR_READ));
> > > + dw_edma_core_ch_count(dw, EDMA_DIR_READ));
> > > dw->rd_ch_cnt = min_t(u16, dw->rd_ch_cnt, EDMA_MAX_RD_CH);
> > >
> > > if (!dw->wr_ch_cnt && !dw->rd_ch_cnt)
> > > @@ -977,7 +950,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> > > dev_name(chip->dev));
> > >
> > > /* Disable eDMA, only to establish the ideal initial conditions */
> > > - dw_edma_v0_core_off(dw);
> > > + dw_edma_core_off(dw);
> > >
> > > /* Request IRQs */
> > > err = dw_edma_irq_request(dw, &wr_alloc, &rd_alloc);
> > > @@ -990,7 +963,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> > > goto err_irq_free;
> > >
> > > /* Turn debugfs on */
> > > - dw_edma_v0_core_debugfs_on(dw);
> > > + dw_edma_core_debugfs_on(dw);
> > >
> > > chip->dw = dw;
> > >
> > > @@ -1016,7 +989,7 @@ int dw_edma_remove(struct dw_edma_chip *chip)
> > > return -ENODEV;
> > >
> > > /* Disable eDMA */
> > > - dw_edma_v0_core_off(dw);
> > > + dw_edma_core_off(dw);
> > >
> > > /* Free irqs */
> > > for (i = (dw->nr_irqs - 1); i >= 0; i--)
> > > diff --git a/drivers/dma/dw-edma/dw-edma-core.h b/drivers/dma/dw-edma/dw-edma-core.h
> > > index 0ab2b6dba880..2555ae0e1b8b 100644
> > > --- a/drivers/dma/dw-edma/dw-edma-core.h
> > > +++ b/drivers/dma/dw-edma/dw-edma-core.h
> > > @@ -111,6 +111,23 @@ struct dw_edma {
> > > raw_spinlock_t lock; /* Only for legacy */
> > >
> > > struct dw_edma_chip *chip;
> > > +
> > > + const struct dw_edma_core_ops *core;
> > > +};
> > > +
> > > +struct dw_edma_core_ops {
> > > + void (*off)(struct dw_edma *dw);
> > > + u16 (*ch_count)(struct dw_edma *dw, enum dw_edma_dir dir);
> > > + enum dma_status (*ch_status)(struct dw_edma_chan *chan);
> >
> > > + void (*clear_done_int)(struct dw_edma_chan *chan);
> > > + void (*clear_abort_int)(struct dw_edma_chan *chan);
> >
> > As I noted above these methods could be called locally from the
> > corresponding IP-core-specific module. Thus you won't need to define
> > the callbacks. It shall simplify the interface a bit.
> >
> > > + void (*done_handle)(struct dw_edma_irq *dw_irq,
> > > + enum dw_edma_dir dir);
> > > + void (*abort_handle)(struct dw_edma_irq *dw_irq,
> > > + enum dw_edma_dir dir);
> >
> > Seeing both of these callbacks (done,abort handlers) are called from
> > the same IRQ-handler what about converting them to a single callback:
> > irqreturn_t (*handle_int)(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir);
> > ?
> > The eDMA channels IRQ-handlers would look like this:
> > --- a/drivers/dma/dw-edma/dw-edma-core.c
> > +++ b/drivers/dma/dw-edma/dw-edma-core.c
> > @@ -692,12 +692,16 @@ static irqreturn_t dw_edma_interrupt(int irq, void *data, bool write)
> > static inline irqreturn_t dw_edma_interrupt_write(int irq, void *data)
> > {
> > - return dw_edma_interrupt(irq, data, true);
> > + struct dw_edma_irq *dw_irq = data;
> > +
> > + return dw_edma_core_handle_int(dw_irq, EDMA_DIR_WRITE);
> > }
> >
> > static inline irqreturn_t dw_edma_interrupt_read(int irq, void *data)
> > {
> > - return dw_edma_interrupt(irq, data, false);
> > + struct dw_edma_irq *dw_irq = data;
> > +
> > + return dw_edma_core_handle_int(dw_irq, EDMA_DIR_READ);
> > }
> >
> > static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
> >
> > Therefore you'll be able to completely drop the
> > static irqreturn_t dw_edma_interrupt(int irq, void *data, bool write)
> > function from drivers/dma/dw-edma/dw-edma-core.c. The function body would
> > be almost fully moved to the handle_int() function of the eDMA/HDMA
> > core-specific ops.
> >
> > For instance in case of the DW eDMA it would look like this:
> > static irqreturn_t dw_edma_v0_core_handle_int(struct dw_edma_irq, enum dw_edma_dir dir)
> > {
> > struct dw_edma *dw = dw_irq->dw;
> > unsigned long total, pos, val;
> > unsigned long off;
> > u32 mask;
> >
> > if (dir == EDMA_DIR_WRITE) {
> > total = dw->wr_ch_cnt;
> > off = 0;
> > mask = dw_irq->wr_mask;
> > } else {
> > total = dw->rd_ch_cnt;
> > off = dw->wr_ch_cnt;
> > mask = dw_irq->rd_mask;
> > }
> >
> > val = dw_edma_v0_core_status_done_int(dw, dir) & mask;
> > for_each_set_bit(pos, &val, total) {
> > struct dw_edma_chan *chan = &dw->chan[pos + off];
> >
> > dw_edma_v0_core_clear_done_int(chan);
> >
> > dw_edma_done_interrupt(chan);
> > }
> >
> > val = dw_edma_v0_core_status_abort_int(dw, dir) & mask;
> > for_each_set_bit(pos, &val, total) {
> > struct dw_edma_chan *chan = &dw->chan[pos + off];
> >
> > dw_edma_v0_core_clear_abort_int(chan);
> >
> > dw_edma_abort_interrupt(chan);
> > }
> >
> > return IRQ_HANDLED;
> > }
> >
> > What do you think?
> >
> > > + void (*start)(struct dw_edma_chunk *chunk, bool first);
> > > + void (*ch_config)(struct dw_edma_chan *chan);
> > > + void (*debugfs_on)(struct dw_edma *dw);
> > > };
> > >
> > > struct dw_edma_sg {
> > > @@ -136,6 +153,9 @@ struct dw_edma_transfer {
> > > enum dw_edma_xfer_type type;
> > > };
> > >
> > > +void dw_edma_done_interrupt(struct dw_edma_chan *chan);
> > > +void dw_edma_abort_interrupt(struct dw_edma_chan *chan);
> > > +
> > > static inline
> > > struct dw_edma_chan *vc2dw_edma_chan(struct virt_dma_chan *vc)
> > > {
> > > @@ -148,4 +168,76 @@ struct dw_edma_chan *dchan2dw_edma_chan(struct dma_chan *dchan)
> > > return vc2dw_edma_chan(to_virt_chan(dchan));
> > > }
> > >
> > > +static inline
> > > +void dw_edma_core_off(struct dw_edma *dw)
> > > +{
> > > + dw->core->off(dw);
> > > +}
> > > +
> > > +static inline
> > > +u16 dw_edma_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> > > +{
> > > + return dw->core->ch_count(dw, dir);
> > > +}
> > > +
> > > +static inline
> > > +enum dma_status dw_edma_core_ch_status(struct dw_edma_chan *chan)
> > > +{
> > > + struct dw_edma *dw = chan->dw;
> > > +
> > > + return dw->core->ch_status(chan);
> > > +}
> > > +
> > > +static inline
> > > +void dw_edma_core_clear_done_int(struct dw_edma_chan *chan)
> > > +{
> > > + struct dw_edma *dw = chan->dw;
> > > +
> > > + dw->core->clear_done_int(chan);
> > > +}
> > > +
> > > +static inline
> > > +void dw_edma_core_clear_abort_int(struct dw_edma_chan *chan)
> > > +{
> > > + struct dw_edma *dw = chan->dw;
> > > +
> > > + dw->core->clear_abort_int(chan);
> > > +}
> > > +
> >
> > > +static inline
> > > +void dw_edma_core_done_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > > +{
> > > + struct dw_edma *dw = dw_irq->dw;
> > > +
> > > + dw->core->done_handle(dw_irq, dir);
> > > +}
> > > +
> > > +static inline
> > > +void dw_edma_core_abort_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > > +{
> > > + struct dw_edma *dw = dw_irq->dw;
> > > +
> > > + dw->core->abort_handle(dw_irq, dir);
> > > +}
> >
> > As I suggested above these two methods can be replaced with a single
> > one: dw_edma_core_handle_int(...).
> >
> > > +
> > > +static inline
> > > +void dw_edma_core_start(struct dw_edma *dw, struct dw_edma_chunk *chunk, bool first)
> > > +{
> > > + dw->core->start(chunk, first);
> > > +}
> > > +
> > > +static inline
> > > +void dw_edma_core_ch_config(struct dw_edma_chan *chan)
> > > +{
> > > + struct dw_edma *dw = chan->dw;
> > > +
> > > + dw->core->ch_config(chan);
> > > +}
> > > +
> > > +static inline
> > > +void dw_edma_core_debugfs_on(struct dw_edma *dw)
> > > +{
> > > + dw->core->debugfs_on(dw);
> > > +}
> > > +
> > > #endif /* _DW_EDMA_CORE_H */
> > > diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
> > > index 72e79a0c0a4e..73dcf72ba3a9 100644
> > > --- a/drivers/dma/dw-edma/dw-edma-v0-core.c
> > > +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
> > > @@ -216,7 +216,7 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
> > > readq_ch(dw, dir, ch, &(__dw_ch_regs(dw, dir, ch)->name))
> > >
> > > /* eDMA management callbacks */
> > > -void dw_edma_v0_core_off(struct dw_edma *dw)
> > > +static void dw_edma_v0_core_off(struct dw_edma *dw)
> > > {
> > > SET_BOTH_32(dw, int_mask,
> > > EDMA_V0_DONE_INT_MASK | EDMA_V0_ABORT_INT_MASK);
> > > @@ -225,7 +225,7 @@ void dw_edma_v0_core_off(struct dw_edma *dw)
> > > SET_BOTH_32(dw, engine_en, 0);
> > > }
> > >
> > > -u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> > > +static u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> > > {
> > > u32 num_ch;
> > >
> > > @@ -242,7 +242,7 @@ u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> > > return (u16)num_ch;
> > > }
> > >
> > > -enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> > > +static enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> > > {
> > > struct dw_edma *dw = chan->dw;
> > > u32 tmp;
> > > @@ -258,7 +258,7 @@ enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> > > return DMA_ERROR;
> > > }
> > >
> > > -void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> > > +static void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> > > {
> > > struct dw_edma *dw = chan->dw;
> > >
> > > @@ -266,7 +266,7 @@ void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> > > FIELD_PREP(EDMA_V0_DONE_INT_MASK, BIT(chan->id)));
> > > }
> > >
> > > -void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> > > +static void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> > > {
> > > struct dw_edma *dw = chan->dw;
> > >
> > > @@ -274,18 +274,66 @@ void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> > > FIELD_PREP(EDMA_V0_ABORT_INT_MASK, BIT(chan->id)));
> > > }
> > >
> > > -u32 dw_edma_v0_core_status_done_int(struct dw_edma *dw, enum dw_edma_dir dir)
> > > +static u32 dw_edma_v0_core_status_done_int(struct dw_edma *dw, enum dw_edma_dir dir)
> > > {
> > > return FIELD_GET(EDMA_V0_DONE_INT_MASK,
> > > GET_RW_32(dw, dir, int_status));
> > > }
> > >
> > > -u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
> > > +static u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
> > > {
> > > return FIELD_GET(EDMA_V0_ABORT_INT_MASK,
> > > GET_RW_32(dw, dir, int_status));
> > > }
> > >
> > > +static
> > > +void dw_edma_v0_core_done_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > > +{
> > > + struct dw_edma *dw = dw_irq->dw;
> > > + unsigned long total, pos, val;
> > > + unsigned long off;
> > > + u32 mask;
> > > +
> > > + if (dir == EDMA_DIR_WRITE) {
> > > + total = dw->wr_ch_cnt;
> > > + off = 0;
> > > + mask = dw_irq->wr_mask;
> > > + } else {
> > > + total = dw->rd_ch_cnt;
> > > + off = dw->wr_ch_cnt;
> > > + mask = dw_irq->rd_mask;
> > > + }
> > > +
> > > + val = dw_edma_v0_core_status_done_int(dw, dir);
> > > + val &= mask;
> >
> > > + for_each_set_bit(pos, &val, total)
> > > + dw_edma_done_interrupt(&dw->chan[pos + off]);
> >
> > As I suggested above replace this with:
> > + for_each_set_bit(pos, &val, total) {
> > + struct dw_edma_chan *chan = &dw->chan[pos + off];
> > +
> > + dw_edma_v0_core_clear_done_int(chan);
> > +
> > + dw_edma_done_interrupt(chan);
> > + }
> >
> > Therefore you'll be able to drop the clear_done_int callback and its
> > invocation from the dw_edma_done_interrupt() function.
> >
> > BTW Why did you change the dw_edma_v0_core_done_handle() semantics
> > from taking the function pointers as an argument to calling the global
> > version of dw_edma_done_interrupt() ?
> In my patch, 'dw_edma_core_clear_done_int' is called by 'dw_edma_done_interrupt',
>
> 'dw_edma_core_clear_done_int' point to 'dw_edma_v0_core_clear_done_int'.
>
> -static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> +void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> {
> struct dw_edma_desc *desc;
> struct virt_dma_desc *vd;
> unsigned long flags;
>
> - dw_edma_v0_core_clear_done_int(chan);
> + dw_edma_core_clear_done_int(chan);
>
>
> So, my patch only drop the callback params, like this in v2 patch
> "dw_irq, dw_edma_done_interrupt, dir)"
>
>
> - for_each_set_bit(pos, &val, total) {
> - struct dw_edma_chan *chan = &dw->chan[pos + off];
> + enum dw_edma_dir dir = write ? EDMA_DIR_WRITE : EDMA_DIR_READ;
>
> - dw_edma_abort_interrupt(chan);
> - }
> + dw->core->dw_xdma_core_done_handle(dw_irq, dw_edma_done_interrupt, dir);
> + dw->core->dw_xdma_core_abort_handle(dw_irq, dw_edma_abort_interrupt, dir);
>
>
> And I will fix it in next version.
I was talking about this change:
v1: dw_edma_v0_core_abort_handle(struct dw_edma_irq *dw_irq,
void (*done_cb)(struct dw_edma_chan *chan),
enum dw_edma_dir dir)
v2: dw_edma_v0_core_done_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
I don't have strong opinion about that but having a function
pointer passed as parameter seemed a tiny bit more context-wise
readable since you won't need to memories that
dw_edma_done_interrupt() and dw_edma_abort_interrupt() are global,
they are defined in the core part of the driver and they are supposed
to be called from the IP-core abstraction layers. On the other hand
the handle_int() callback prototype will look a bit more bulky.
Note if you decide to get the previous semantics back please pass the
callbacks as the last arguments:
dw_edma_v0_core_handle_int(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir,
void (*done)(struct dw_edma_chan *chan),
void (*abort)(struct dw_edma_chan *chan))
-Serge(y)
>
> Thanks,
> Cai-
> >
> > > +}
> > > +
> > > +static
> > > +void dw_edma_v0_core_abort_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > > +{
> > > + struct dw_edma *dw = dw_irq->dw;
> > > + unsigned long total, pos, val;
> > > + unsigned long off;
> > > + u32 mask;
> > > +
> > > + if (dir == EDMA_DIR_WRITE) {
> > > + total = dw->wr_ch_cnt;
> > > + off = 0;
> > > + mask = dw_irq->wr_mask;
> > > + } else {
> > > + total = dw->rd_ch_cnt;
> > > + off = dw->wr_ch_cnt;
> > > + mask = dw_irq->rd_mask;
> > > + }
> > > +
> > > + val = dw_edma_v0_core_status_abort_int(dw, dir);
> > > + val &= mask;
> >
> > > + for_each_set_bit(pos, &val, total)
> > > + dw_edma_abort_interrupt(&dw->chan[pos + off]);
> >
> > ditto
> >
> > > +}
> > > +
> > > static void dw_edma_v0_write_ll_data(struct dw_edma_chunk *chunk, int i,
> > > u32 control, u32 size, u64 sar, u64 dar)
> > > {
> > > @@ -356,7 +404,7 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
> > > dw_edma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
> > > }
> > >
> > > -void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> > > +static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> > > {
> > > struct dw_edma_chan *chan = chunk->chan;
> > > struct dw_edma *dw = chan->dw;
> > > @@ -427,7 +475,7 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> > > FIELD_PREP(EDMA_V0_DOORBELL_CH_MASK, chan->id));
> > > }
> > >
> > > -int dw_edma_v0_core_device_config(struct dw_edma_chan *chan)
> > > +static void dw_edma_v0_core_ch_config(struct dw_edma_chan *chan)
> > > {
> > > struct dw_edma *dw = chan->dw;
> > > u32 tmp = 0;
> > > @@ -494,12 +542,28 @@ int dw_edma_v0_core_device_config(struct dw_edma_chan *chan)
> > > SET_RW_32(dw, chan->dir, ch67_imwr_data, tmp);
> > > break;
> > > }
> > > -
> > > - return 0;
> > > }
> > >
> > > /* eDMA debugfs callbacks */
> > > -void dw_edma_v0_core_debugfs_on(struct dw_edma *dw)
> > > +static void dw_edma_v0_core_debugfs_on(struct dw_edma *dw)
> > > {
> > > dw_edma_v0_debugfs_on(dw);
> > > }
> > > +
> > > +static const struct dw_edma_core_ops edma_core = {
> > > + .off = dw_edma_v0_core_off,
> > > + .ch_count = dw_edma_v0_core_ch_count,
> > > + .ch_status = dw_edma_v0_core_ch_status,
> >
> > > + .clear_done_int = dw_edma_v0_core_clear_done_int,
> > > + .clear_abort_int = dw_edma_v0_core_clear_abort_int,
> > > + .done_handle = dw_edma_v0_core_done_handle,
> > > + .abort_handle = dw_edma_v0_core_abort_handle,
> >
> > If you take into account what I suggested above these four callbacks will
> > be replaced with a single one handle_int. Thus the interface will look
> > much simpler so will the whole IRQs-handling logic:
> >
> > irq: dw_edma_interrupt_{write,read}()
> > +-> dw_edma_core_handle_int() (dw-edma-v0-core.c)
> > +-> dw_edma_v0_core_status_done_int() (dw-edma-v0-core.c)
> > +-> dw_edma_v0_core_clear_done_int() (dw-edma-v0-core.c)
> > +-> dw_edma_done_interrupt() (dw-edma-core.c)
> > +-> dw_edma_v0_core_status_abort_int() (dw-edma-v0-core.c)
> > +-> dw_edma_v0_core_clear_abort_int() (dw-edma-v0-core.c)
> > +-> dw_edma_abort_interrupt() (dw-edma-core.c)
> >
> > In your case the calls hierarchy looks like this:
> > irq: dw_edma_interrupt_{write,read}()
> > +-> dw_edma_interrupt()
> > +-> dw_edma_core_done_handle() (dw-edma-v0-core.c)
> > +-> dw_edma_v0_core_status_done_int() (dw-edma-v0-core.c)
> > +-> dw_edma_done_interrupt() (dw-edma-core.c)
> > +-> dw_edma_core_clear_done_int() (dw-edma-v0-core.c)
> > +-> dw_edma_core_abort_handle() (dw-edma-v0-core.c)
> > +-> dw_edma_v0_core_status_abort_int() (dw-edma-v0-core.c)
> > +-> dw_edma_abort_interrupt() (dw-edma-core.c)
> > +-> dw_edma_core_clear_abort_int() (dw-edma-v0-core.c)
> >
> > See the calls thread is more linear in my case and the reader won't
> > need to get several times back and forth between the generic part of
> > the driver and the IP-core-specific one.
> >
> > -Serge(y)
> >
> > > + .start = dw_edma_v0_core_start,
> > > + .ch_config = dw_edma_v0_core_ch_config,
> > > + .debugfs_on = dw_edma_v0_core_debugfs_on,
> > > +};
> > > +
> > > +void dw_edma_v0_core_register(struct dw_edma *dw)
> > > +{
> > > + dw->core = &edma_core;
> > > +}
> > > diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.h b/drivers/dma/dw-edma/dw-edma-v0-core.h
> > > index ab96a1f48080..04a882222f99 100644
> > > --- a/drivers/dma/dw-edma/dw-edma-v0-core.h
> > > +++ b/drivers/dma/dw-edma/dw-edma-v0-core.h
> > > @@ -11,17 +11,7 @@
> > >
> > > #include <linux/dma/edma.h>
> > >
> > > -/* eDMA management callbacks */
> > > -void dw_edma_v0_core_off(struct dw_edma *chan);
> > > -u16 dw_edma_v0_core_ch_count(struct dw_edma *chan, enum dw_edma_dir dir);
> > > -enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan);
> > > -void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan);
> > > -void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan);
> > > -u32 dw_edma_v0_core_status_done_int(struct dw_edma *chan, enum dw_edma_dir dir);
> > > -u32 dw_edma_v0_core_status_abort_int(struct dw_edma *chan, enum dw_edma_dir dir);
> > > -void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first);
> > > -int dw_edma_v0_core_device_config(struct dw_edma_chan *chan);
> > > -/* eDMA debug fs callbacks */
> > > -void dw_edma_v0_core_debugfs_on(struct dw_edma *dw);
> > > +/* eDMA core register */
> > > +void dw_edma_v0_core_register(struct dw_edma *dw);
> > >
> > > #endif /* _DW_EDMA_V0_CORE_H */
> > > --
> > > 2.34.1
> > >