[PATCH v3 net-next 11/13] net: dsa: felix: act upon the mqprio qopt in taprio offload
From: Vladimir Oltean
Date: Mon Feb 20 2023 - 07:26:25 EST
The mqprio queue configuration can appear either through
TC_SETUP_QDISC_MQPRIO or through TC_SETUP_QDISC_TAPRIO. Make sure both
are treated in the same way.
Code does nothing new for now (except for rejecting multiple TXQs per
TC, which is a useless concept with DSA switches).
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Reviewed-by: Ferenc Fejes <fejes@xxxxxxxxxxx>
---
v2->v3: slightly reword commit message
v1->v2: none
drivers/net/dsa/ocelot/felix_vsc9959.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 3df71444dde1..81fcdccacd8b 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1424,6 +1424,7 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
mutex_lock(&ocelot->tas_lock);
if (!taprio->enable) {
+ ocelot_port_mqprio(ocelot, port, &taprio->mqprio);
ocelot_rmw_rix(ocelot, 0, QSYS_TAG_CONFIG_ENABLE,
QSYS_TAG_CONFIG, port);
@@ -1436,15 +1437,19 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
return 0;
}
+ ret = ocelot_port_mqprio(ocelot, port, &taprio->mqprio);
+ if (ret)
+ goto err_unlock;
+
if (taprio->cycle_time > NSEC_PER_SEC ||
taprio->cycle_time_extension >= NSEC_PER_SEC) {
ret = -EINVAL;
- goto err;
+ goto err_reset_tc;
}
if (taprio->num_entries > VSC9959_TAS_GCL_ENTRY_MAX) {
ret = -ERANGE;
- goto err;
+ goto err_reset_tc;
}
/* Enable guard band. The switch will schedule frames without taking
@@ -1468,7 +1473,7 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
ret = -EBUSY;
- goto err;
+ goto err_reset_tc;
}
ocelot_rmw_rix(ocelot,
@@ -1503,12 +1508,19 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
!(val & QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE),
10, 100000);
if (ret)
- goto err;
+ goto err_reset_tc;
ocelot_port->taprio = taprio_offload_get(taprio);
vsc9959_tas_guard_bands_update(ocelot, port);
-err:
+ mutex_unlock(&ocelot->tas_lock);
+
+ return 0;
+
+err_reset_tc:
+ taprio->mqprio.qopt.num_tc = 0;
+ ocelot_port_mqprio(ocelot, port, &taprio->mqprio);
+err_unlock:
mutex_unlock(&ocelot->tas_lock);
return ret;
--
2.34.1