Re: [PATCH v2 1/9] dt-bindings: arm: Add support for DSB element

[Suzuki K Poulose]

On 19/01/2023 07:41, Tao Zhang wrote:
> Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
> Bit) element for TPDA. Specifies the DSB element size supported
> by each monitor connected to the aggregator on each port. Should
> be specified in pairs (port, dsb element size).
>
> Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
> Signed-off-by: Tao Zhang <taozha@xxxxxxxxxxxxxxxx>
> ---
>   .../bindings/arm/qcom,coresight-tpda.yaml          | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> index 2ec9b5b..298db7f 100644
> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> @@ -58,6 +58,26 @@ properties:
>       minItems: 1
>       maxItems: 2
>   
> +  qcom,dsb-element-size:
> +    description: |
> +      Specifies the DSB(Discrete Single Bit) element size supported by
> +      each monitor connected to the aggregator on each port. Should be
> +      specified in pairs <port, dsb element size>.
> +
> +      Note: The maximum value of the port number depends on how many
> +      input ports the current TPDA has. DSB element size currently only
> +      supports 32-bit and 64-bit.
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    items:
> +      items:
> +        - description: |
> +            "port" indicates TPDA input port number
> +          minimum: 0
> +        - description: |
> +            "dsb element size" indicates dsb element size
> +          minimum: 0
> +          maximum: 64
> +
>     clocks:
>       maxItems: 1
>   
> @@ -100,6 +120,8 @@ examples:
>          compatible = "qcom,coresight-tpda", "arm,primecell";
>          reg = <0x6004000 0x1000>;
>   
> +       qcom,dsb-element-size = <0 32>;
> +

If we go down this route,

nit: please could you provide a bit more complex example, e.g. with 2 
entries ?

Suzuki

>          clocks = <&aoss_qmp>;
>          clock-names = "apb_pclk";
>