[PATCH v6 5/5] arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua

From: Bryan O'Donoghue
Date: Wed Feb 22 2023 - 07:06:15 EST

Next message: Bryan O'Donoghue: "[PATCH v6 4/5] arm64: dts: qcom: Add Square apq8039-t2 board"
Previous message: Bryan O'Donoghue: "[PATCH v6 3/5] arm64: dts: qcom: Add msm8939-pm8916.dtsi include"
In reply to: Bryan O'Donoghue: "Re: [PATCH v6 3/5] arm64: dts: qcom: Add msm8939-pm8916.dtsi include"
Next in thread: Bryan O'Donoghue: "[PATCH v6 4/5] arm64: dts: qcom: Add Square apq8039-t2 board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip".

Tulip is paired with:

- wcn3660
- smb1360 battery charger
- 720p Truly NT35521 Panel

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 457 ++++++++++++++++++
2 files changed, 458 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2983e83a19061..81a38d46deba5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
new file mode 100644
index 0000000000000..c646fada11a5a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023, Bryan O'Donoghue.
+ *
+ */
+
+/dts-v1/;
+
+#include "msm8939.dtsi"
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia M4 Aqua";
+ compatible = "sony,kanuti-tulip", "qcom,msm8939";
+
+ qcom,board-id = <8 0>;
+ qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>;
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vreg_negative5_reg: negative5-regulator {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&negative5_reg_default>;
+ pinctrl-names = "default";
+ regulator-name = "negative5_reg";
+ gpio = <&tlmm 17 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <0>;
+ };
+
+ vreg_positive5_reg: positive5-regulator {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&positive5_reg_default>;
+ pinctrl-names = "default";
+ regulator-name = "positive5_reg";
+ gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <0>;
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ panel@0 {
+ compatible = "sony,tulip-truly-nt35521";
+ reg = <0>;
+ positive5-supply = <&vreg_positive5_reg>;
+ negative5-supply = <&vreg_negative5_reg>;
+ reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
+
+ ports {
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi_phy0 {
+ qcom,dsi-phy-regulator-ldo-mode;
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&tlmm {
+ ak8963_default: ak8963-default-state {
+ pins = "gpio69";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ ak8963_sleep: ak8963-sleep-state {
+ pins = "gpio69";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ /* Ambient light and proximity sensor apds9930 and apds9900 */
+ apds99xx_default: apds99xx-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ apds99xx_sleep: apds99xx-sleep-state {
+ pins = "gpio113";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ cam_sensor_flash_default: cam-sensor-flash-default-state {
+ pins = "gpio98", "gpio97";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cci1_default: cci1-default-state {
+ pins = "gpio31", "gpio32";
+ function = "cci_i2c";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cdc_ext_spk_pa_active: cdc-ext-spk-pa-on-state {
+ pins = "gpio0";
+ function = "gpio";
+ drive-strength = <8>;
+ output-low;
+ };
+
+ cdc_ext_spk_pa_sus: cdc-ext-spk-pa-off-state {
+ pins = "gpio0";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cdc_slim_lines_act: lines-on-state {
+ pins = "gpio63";
+ function = "cdc_pdm0";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ cdc_slim_lines_sus: lines-off-state {
+ pins = "gpio63";
+ function = "cdc_pdm0";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cross_conn_det_act: lines-on-state {
+ pins = "gpio120";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <8>;
+ output-low;
+ };
+
+ cross_conn_det_sus: lines-off-state {
+ pins = "gpio120";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ ext_buck_vsel: vsel0-state {
+ pins = "gpio111";
+ function = "gpio";
+ drive-strength = <2>;
+ };
+
+ ext_cdc_tlmm_lines_act: tlmm-lines-on-state {
+ pins = "gpio116", "gpio112", "gpio117", "gpio118", "gpio119";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ ext_cdc_tlmm_lines_sus: tlmm-lines-off-state {
+ pins = "gpio116", "gpio112", "gpio117", "gpio118", "gpio119";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ gpio_key_suspend: gpio-key-suspend-state {
+ pins = "gpio107", "gpio108", "gpio109";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ negative5_reg_default: negative5-reg-default-state {
+ pins = "gpio17";
+ function = "gpio";
+ output-low;
+ };
+
+ positive5_reg_default: positive5-reg-default-state {
+ pins = "gpio114";
+ function = "gpio";
+ output-low;
+ };
+
+ /* Gyroscope and accelerometer sensor combo */
+ mpu6050_default: mpu6050-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ mpu6050_sleep: mpu6050-sleep-state {
+ pins = "gpio115";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ nfc_disable_active: nfc-disable-active-state {
+ pins = "gpio20";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ nfc_disable_suspend: nfc-disable-suspend-state {
+ pins = "gpio20";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <6>;
+ };
+
+ nfc_int_active: nfc-int-active-state {
+ pins = "gpio21";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ nfc_int_suspend: nfc-int-suspend-state {
+ pins = "gpio21";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ nt35521_te_default: nt35521-te-default-state {
+ pins = "gpio24";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <6>;
+ };
+
+ nt35521_backlight: nt35521-backlight-default-state {
+ pins = "gpio10";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <6>;
+ };
+
+ smb_int: smb-int-default-state {
+ pins = "gpio62";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ ts_int_active: ts-int-active-state {
+ pins = "gpio13";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+
+ ts_int_suspend: ts-int-suspend-state {
+ pins = "gpio13";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ ts_reset_active: ts-reset-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+
+ ts_reset_suspend: ts-reset-suspend-state {
+ pins = "gpio12";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ ts_release: ts-release-default-state {
+ pins = "gpio13", "gpio12";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+};
+
+&pronto {
+ status = "okay";
+
+ iris {
+ compatible = "qcom,wcn3660";
+ };
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ pm8916_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8916_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ pm8916_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8916_l4: l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8916_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8916_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8916_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8916_l8: l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8916_l9: l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8916_l10: l10 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8916_l11: l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pm8916_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8916_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8916_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8916_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8916_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8916_l18: l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&sdhc_1 {
+ pinctrl-0 = <&sdc1_default_state>;
+ pinctrl-1 = <&sdc1_sleep_state>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default_state>;
+ pinctrl-1 = <&sdc2_sleep_state>;
+ pinctrl-names = "default", "sleep";
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
--
2.39.1

Next message: Bryan O'Donoghue: "[PATCH v6 4/5] arm64: dts: qcom: Add Square apq8039-t2 board"
Previous message: Bryan O'Donoghue: "[PATCH v6 3/5] arm64: dts: qcom: Add msm8939-pm8916.dtsi include"
In reply to: Bryan O'Donoghue: "Re: [PATCH v6 3/5] arm64: dts: qcom: Add msm8939-pm8916.dtsi include"
Next in thread: Bryan O'Donoghue: "[PATCH v6 4/5] arm64: dts: qcom: Add Square apq8039-t2 board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]