[PATCH 00/11] Add PCIe RC support to Qcom SDX55 SoC
From: Manivannan Sadhasivam
Date: Wed Feb 22 2023 - 10:33:15 EST
Hi,
This series adds PCIe RC support to the Qcom SDX55 SoC. The PCIe controller
in SDX55 can act as both Root Complex and Endpoint but only one mode at a
time i.e., the mode cannot be switched during runtime.
This series has been tested on Thundercomm T55 board having QCA6390 WLAN
chipset connected to the PCIe controller. For powering up the WLAN chipset,
an out-of-tree patch has been used since we do not have a proper driver in
mainline to handle the power supplies.
NOTE: Even with this series, I couldn't get network connectivity using
QCA6390. But that's due to ath11k regression for which I've filed a bug
report: https://bugzilla.kernel.org/show_bug.cgi?id=206923
Merging strategy
----------------
PCI and binding patches through PCI tree
PHY patches through PHY tree
Devicetree patches through Qcom tree
Thanks,
Mani
Manivannan Sadhasivam (11):
dt-bindings: PCI: qcom: Update maintainers entry
dt-bindings: PCI: qcom: Add iommu properties
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
phy: qcom-qmp-pcie: Split out EP related init sequence for SDX55
phy: qcom-qmp-pcie: Add RC init sequence for SDX55
PCI: qcom: Add support for SDX55 SoC
.../devicetree/bindings/pci/qcom,pcie-ep.yaml | 2 +-
.../devicetree/bindings/pci/qcom,pcie.yaml | 35 +++-
arch/arm/boot/dts/qcom-sdx55-t55.dts | 42 +++++
.../boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 2 +-
arch/arm/boot/dts/qcom-sdx55.dtsi | 154 +++++++++++++-----
drivers/pci/controller/dwc/pcie-qcom.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 91 +++++++++--
.../qualcomm/phy-qcom-qmp-pcs-pcie-v4_20.h | 2 +
8 files changed, 272 insertions(+), 60 deletions(-)
--
2.25.1