Re: [PATCH v4 1/2] gpio: gpio-mlxbf3: Add gpio driver support

[Linus Walleij]

Hi Asamaa,

thanks for your patch!

getting a lot better all the time.

On Fri, Feb 17, 2023 at 10:27 PM Asmaa Mnebhi <asmaa@xxxxxxxxxx> wrote:

> Add support for the BlueField-3 SoC GPIO driver.
> This driver configures and handles GPIO interrupts. It also enables a user
> to manipulate certain GPIO pins via libgpiod tools or other kernel drivers.
> The usables pins are defined via the gpio-reserved-ranges property.
>
> Signed-off-by: Asmaa Mnebhi <asmaa@xxxxxxxxxx>

(...)
> +config GPIO_MLXBF3
> +       tristate "Mellanox BlueField 3 SoC GPIO"
> +       depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST)
> +       select GPIO_GENERIC

select GPIOLIB_IRQCHIP

since you use it.

(...)
> +static void mlxbf3_gpio_irq_enable(struct irq_data *irqd)
> +{
> +       struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
> +       struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
> +       int offset = irqd_to_hwirq(irqd);
> +       unsigned long flags;
> +       u32 val;
> +
> +       raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
> +       writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE);
> +
> +       val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
> +       val |= BIT(offset);
> +       writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
> +       raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);

Here, at the end (*after* writing registers) call:

gpiochip_disable_irq(gc, offset);

> +static void mlxbf3_gpio_irq_disable(struct irq_data *irqd)
> +{
> +       struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
> +       struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
> +       int offset = irqd_to_hwirq(irqd);
> +       unsigned long flags;
> +       u32 val;
> +

Here, at the beginning (*before* writing registers) call:

gpiochip_disable_irq(gc, offset);

> +       raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
> +       val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
> +       val &= ~BIT(offset);
> +       writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
> +       raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
> +}

(...)

> +static const struct irq_chip gpio_mlxbf3_irqchip = {
> +       .name = "MLNXBF33",
> +       .irq_set_type = mlxbf3_gpio_irq_set_type,
> +       .irq_enable = mlxbf3_gpio_irq_enable,
> +       .irq_disable = mlxbf3_gpio_irq_disable,

Like Andy said:

.flags = IRQCHIP_IMMUTABLE,
GPIOCHIP_IRQ_RESOURCE_HELPERS,

Apart from this it looks all right.

Yours,
Linus Walleij