Re: [PATCH v3 7/7] PCI: dwc: Introduce region limit from DT

[Krzysztof Kozlowski]

On 23/02/2023 19:05, Elad Nachman wrote:
> From: Elad Nachman <enachman@xxxxxxxxxxx>
> 
> Allow dts override of region limit for SOCs with older Synopsis
> Designware PCIe IP but with greater than 32-bit address range support,
> such as the Armada 7020/7040/8040 family of SOCs by Marvell,
> when the DT file places the PCIe window above the 4GB region.
> The Synopsis Designware PCIe IP in these SOCs is too old to specify the
> highest memory location supported by the PCIe, but practically supports
> such locations. Allow these locations to be specified in the DT file.
> DT property is called num-regionmask , and can range between 33 and 64.
> 
> Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 53a16b8b6ac2..429594e853ae 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -401,7 +401,6 @@ static void dw_pcie_writel_atu(struct dw_pcie *pci, u32 dir, u32 index,
>  	int ret;
>  
>  	base = dw_pcie_select_atu(pci, dir, index);
> -
>  	if (pci->ops && pci->ops->write_dbi) {
>  		pci->ops->write_dbi(pci, base, reg, 4, val);
>  		return;
> @@ -735,10 +734,13 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
>  void dw_pcie_iatu_detect(struct dw_pcie *pci)
>  {
>  	int max_region, ob, ib;
> -	u32 val, min, dir;
> +	u32 val, min, dir, ret, num_region_maskbits;

No need to use num_region_maskbits in function scope.

>  	u64 max;
> +	struct device *dev = pci->dev;
> +	struct device_node *np = dev->of_node;
>  
>  	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
> +

You need to fix this random changes in unrelated places...

Best regards,
Krzysztof