Re: [PATCH v7 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
From: Lee Jones
Date: Wed Mar 01 2023 - 11:05:00 EST
On Fri, 03 Feb 2023, Fenglin Wu wrote:
> Add initial driver to support flash LED module found in Qualcomm
> Technologies, Inc. PMICs. The flash module can have 3 or 4 channels
> and each channel can be controlled indepedently and support full scale
> current up to 1.5 A. It also supports connecting two channels together
> to supply one LED component with full scale current up to 2 A. In that
> case, the current will be split on each channel symmetrically and the
> channels will be enabled and disabled at the same time.
>
> Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
> Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> # sm7225-fairphone-fp4 + pm6150l
> ---
Change log?
> drivers/leds/flash/Kconfig | 15 +
> drivers/leds/flash/Makefile | 1 +
> drivers/leds/flash/leds-qcom-flash.c | 769 +++++++++++++++++++++++++++
> 3 files changed, 785 insertions(+)
> create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>
> diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
> index d3eb689b193c..f36a60409290 100644
> --- a/drivers/leds/flash/Kconfig
> +++ b/drivers/leds/flash/Kconfig
> @@ -61,6 +61,21 @@ config LEDS_MT6360
> Independent current sources supply for each flash LED support torch
> and strobe mode.
>
> +config LEDS_QCOM_FLASH
> + tristate "LED support for flash module inside Qualcomm Technologies, Inc. PMIC"
> + depends on MFD_SPMI_PMIC || COMPILE_TEST
> + depends on LEDS_CLASS && OF
> + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
> + select REGMAP
> + help
> + This option enables support for the flash module found in Qualcomm
> + Technologies, Inc. PMICs. The flash module can have 3 or 4 flash LED
> + channels and each channel is programmable to support up to 1.5 A full
> + scale current. It also supports connecting two channels' output together
> + to supply one LED component to achieve current up to 2 A. In such case,
> + the total LED current will be split symmetrically on each channel and
> + they will be enabled/disabled at the same time.
> +
> config LEDS_RT4505
> tristate "LED support for RT4505 flashlight controller"
> depends on I2C && OF
> diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
> index 0acbddc0b91b..8a60993f1a25 100644
> --- a/drivers/leds/flash/Makefile
> +++ b/drivers/leds/flash/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A) += leds-as3645a.o
> obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
> obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
> obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
> +obj-$(CONFIG_LEDS_QCOM_FLASH) += leds-qcom-flash.o
> obj-$(CONFIG_LEDS_RT4505) += leds-rt4505.o
> obj-$(CONFIG_LEDS_RT8515) += leds-rt8515.o
> obj-$(CONFIG_LEDS_SGM3140) += leds-sgm3140.o
> diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
> new file mode 100644
> index 000000000000..51ef60e2338c
> --- /dev/null
> +++ b/drivers/leds/flash/leds-qcom-flash.c
> @@ -0,0 +1,769 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/leds.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <media/v4l2-flash-led-class.h>
> +
> +/* registers definitions */
> +#define FLASH_TYPE_REG 0x04
> +#define FLASH_TYPE_VAL 0x18
> +
> +#define FLASH_SUBTYPE_REG 0x05
> +#define FLASH_SUBTYPE_3CH_VAL 0x04
> +#define FLASH_SUBTYPE_4CH_VAL 0x07
> +
> +#define FLASH_STS_3CH_OTST1 BIT(0)
> +#define FLASH_STS_3CH_OTST2 BIT(1)
> +#define FLASH_STS_3CH_OTST3 BIT(2)
> +#define FLASH_STS_3CH_BOB_THM_OVERLOAD BIT(3)
> +#define FLASH_STS_3CH_VPH_DROOP BIT(4)
> +#define FLASH_STS_3CH_BOB_ILIM_S1 BIT(5)
> +#define FLASH_STS_3CH_BOB_ILIM_S2 BIT(6)
> +#define FLASH_STS_3CH_BCL_IBAT BIT(7)
> +
> +#define FLASH_STS_4CH_VPH_LOW BIT(0)
> +#define FLASH_STS_4CH_BCL_IBAT BIT(1)
> +#define FLASH_STS_4CH_BOB_ILIM_S1 BIT(2)
> +#define FLASH_STS_4CH_BOB_ILIM_S2 BIT(3)
> +#define FLASH_STS_4CH_OTST2 BIT(4)
> +#define FLASH_STS_4CH_OTST1 BIT(5)
> +#define FLASH_STS_4CHG_BOB_THM_OVERLOAD BIT(6)
> +
> +#define FLASH_TIMER_EN_BIT BIT(7)
> +#define FLASH_TIMER_VAL_MASK GENMASK(6, 0)
> +#define FLASH_TIMER_STEP_MS 10
> +
> +#define FLASH_STROBE_HW_SW_SEL_BIT BIT(2)
> +#define SW_STROBE_VAL 0
> +#define HW_STROBE_VAL 1
> +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT BIT(1)
> +#define STROBE_LEVEL_TRIGGER_VAL 0
> +#define STROBE_EDGE_TRIGGER_VAL 1
> +#define FLASH_STROBE_POLARITY_BIT BIT(0)
> +#define STROBE_ACTIVE_HIGH_VAL 1
> +
> +#define FLASH_IRES_MASK_4CH BIT(0)
> +#define FLASH_IRES_MASK_3CH GENMASK(1, 0)
> +#define FLASH_IRES_12P5MA_VAL 0
> +#define FLASH_IRES_5MA_VAL_4CH 1
> +#define FLASH_IRES_5MA_VAL_3CH 3
> +
> +/* constants */
> +#define FLASH_CURRENT_MAX_UA 1500000
> +#define TORCH_CURRENT_MAX_UA 500000
> +#define FLASH_TOTAL_CURRENT_MAX_UA 2000000
> +#define FLASH_CURRENT_DEFAULT_UA 1000000
> +#define TORCH_CURRENT_DEFAULT_UA 200000
> +
> +#define TORCH_IRES_UA 5000
> +#define FLASH_IRES_UA 12500
> +
> +#define FLASH_TIMEOUT_MAX_US 1280000
> +#define FLASH_TIMEOUT_STEP_US 10000
> +
> +#define UA_PER_MA 1000
> +
> +enum hw_type {
> + QCOM_MVFLASH_3CH,
> + QCOM_MVFLASH_4CH,
> +};
> +
> +enum led_mode {
> + FLASH_MODE,
> + TORCH_MODE,
> +};
> +
> +enum led_strobe {
> + SW_STROBE,
> + HW_STROBE,
> +};
> +
> +enum {
> + REG_STATUS1,
> + REG_STATUS2,
> + REG_STATUS3,
> + REG_CHAN_TIMER,
> + REG_ITARGET,
> + REG_MODULE_EN,
> + REG_IRESOLUTION,
> + REG_CHAN_STROBE,
> + REG_CHAN_EN,
> + REG_MAX_COUNT,
> +};
> +
> +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
> + REG_FIELD(0x08, 0, 7), /* status1 */
> + REG_FIELD(0x09, 0, 7), /* status2 */
> + REG_FIELD(0x0a, 0, 7), /* status3 */
> + REG_FIELD_ID(0x40, 0, 7, 3, 1), /* chan_timer */
> + REG_FIELD_ID(0x43, 0, 6, 3, 1), /* itarget */
> + REG_FIELD(0x46, 7, 7), /* module_en */
> + REG_FIELD(0x47, 0, 5), /* iresolution */
> + REG_FIELD_ID(0x49, 0, 2, 3, 1), /* chan_strobe */
> + REG_FIELD(0x4c, 0, 2), /* chan_en */
> +};
> +
> +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
> + REG_FIELD(0x06, 0, 7), /* status1 */
> + REG_FIELD(0x07, 0, 6), /* status2 */
> + REG_FIELD(0x09, 0, 7), /* status3 */
> + REG_FIELD_ID(0x3e, 0, 7, 4, 1), /* chan_timer */
> + REG_FIELD_ID(0x42, 0, 6, 4, 1), /* itarget */
> + REG_FIELD(0x46, 7, 7), /* module_en */
> + REG_FIELD(0x49, 0, 3), /* iresolution */
> + REG_FIELD_ID(0x4a, 0, 6, 4, 1), /* chan_strobe */
> + REG_FIELD(0x4e, 0, 3), /* chan_en */
> +};
> +
> +struct qcom_flash_led {
> + struct led_classdev_flash flash;
> + struct v4l2_flash *v4l2_flash;
> + u32 max_flash_current_ma;
> + u32 max_torch_current_ma;
> + u32 max_timeout_ms;
> + u32 flash_current_ma;
> + u32 flash_timeout_ms;
> + u8 *chan_id;
> + u8 chan_count;
> + bool enabled;
> + void *priv_data;
How is this anything other than an obfuscated version of the previous
implementation?
Right, let's go back to first principles:
Why do you need a separate 'chip' structure anyway?
> +};
> +
> +struct qcom_flash_chip {
> + struct qcom_flash_led *leds;
Goes away if you just use qcom_flash_led.
> + struct regmap_field *r_fields[REG_MAX_COUNT];
This looks like it might be an issue.
If so, why not have another structure that all LEDs get a pointer to,
but does not have a pointer to the LEDs, thus satisfying our one-way
rule?
As far as I can see, the only time you need to point from 'chip' to
'leds' is to release v4l2_flash. If you can find another sane way of
doing that, you can drop the chip to leds link.
Take a peak at some other drivers, to see how they manage that.
> + struct device *dev;
Can be derived from led_classdev_flash.
> + struct mutex lock;
Any reason why the lock can't be per LED?
> + enum hw_type hw_type;
> + u8 leds_count;
Goes away if you just use qcom_flash_led.
> + u8 max_channels;
What is a channel? And how does it relate to the LEDs?
Looks like the LED structure also has a "chan_count" attribute.
> + u8 chan_en_bits;
> +};
> +
> +static inline void *flash_led_get_priv_data(struct qcom_flash_led *led)
> +{
> + return led->priv_data;
> +}
> +
> +static int set_flash_module_en(struct qcom_flash_led *led, bool en)
> +{
> + struct qcom_flash_chip *chip = flash_led_get_priv_data(led);
> + u8 led_mask = 0, enable;
> + int i, rc;
> +
> + for (i = 0; i < led->chan_count; i++)
> + led_mask |= BIT(led->chan_id[i]);
> +
> + mutex_lock(&chip->lock);
> + if (en)
> + chip->chan_en_bits |= led_mask;
> + else
> + chip->chan_en_bits &= ~led_mask;
> +
> + enable = !!chip->chan_en_bits;
> + rc = regmap_field_write(chip->r_fields[REG_MODULE_EN], enable);
> + if (rc)
> + dev_err(chip->dev, "write module_en failed, rc=%d\n", rc);
> + mutex_unlock(&chip->lock);
> +
> + return rc;
> +}
> +
> +static int set_flash_current(struct qcom_flash_led *led, u32 current_ma, enum led_mode mode)
> +{
> + struct qcom_flash_chip *chip = flash_led_get_priv_data(led);
> + u32 itarg_ua, ires_ua;
> + u8 shift, ires_mask = 0, ires_val = 0, chan_id;
> + int i, rc;
> +
> + /*
> + * Split the current across the channels and set the
> + * IRESOLUTION and ITARGET registers accordingly.
> + */
> + itarg_ua = (current_ma * UA_PER_MA) / led->chan_count + 1;
> + ires_ua = (mode == FLASH_MODE) ? FLASH_IRES_UA : TORCH_IRES_UA;
> +
> + for (i = 0; i < led->chan_count; i++) {
> + u8 itarget = 0;
> +
> + if (itarg_ua > ires_ua)
> + itarget = itarg_ua / ires_ua - 1;
> +
> + chan_id = led->chan_id[i];
> +
> + rc = regmap_fields_write(chip->r_fields[REG_ITARGET], chan_id, itarget);
> + if (rc)
> + return rc;
> +
> + if (chip->hw_type == QCOM_MVFLASH_3CH) {
> + shift = chan_id * 2;
> + ires_mask |= FLASH_IRES_MASK_3CH << shift;
> + ires_val |= ((mode == FLASH_MODE) ?
> + (FLASH_IRES_12P5MA_VAL << shift) :
> + (FLASH_IRES_5MA_VAL_3CH << shift));
> + } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> + shift = chan_id;
> + ires_mask |= FLASH_IRES_MASK_4CH << shift;
> + ires_val |= ((mode == FLASH_MODE) ?
> + (FLASH_IRES_12P5MA_VAL << shift) :
> + (FLASH_IRES_5MA_VAL_4CH << shift));
> + } else {
> + dev_err(chip->dev, "HW type %d is not supported\n", chip->hw_type);
> + return -ENOTSUPP;
> + }
> + }
> +
> + return regmap_field_update_bits(chip->r_fields[REG_IRESOLUTION], ires_mask, ires_val);
> +}
> +
> +static int set_flash_timeout(struct qcom_flash_led *led, u32 timeout_ms)
> +{
> + struct qcom_flash_chip *chip = flash_led_get_priv_data(led);
> + u8 timer, chan_id;
> + int rc, i;
> +
> + /* set SAFETY_TIMER for all the channels connected to the same LED */
> + timeout_ms = min_t(u32, timeout_ms, led->max_timeout_ms);
> +
> + for (i = 0; i < led->chan_count; i++) {
> + chan_id = led->chan_id[i];
> +
> + timer = timeout_ms / FLASH_TIMER_STEP_MS;
> + timer = clamp_t(u8, timer, 0, FLASH_TIMER_VAL_MASK);
> +
> + if (timeout_ms)
> + timer |= FLASH_TIMER_EN_BIT;
> +
> + rc = regmap_fields_write(chip->r_fields[REG_CHAN_TIMER], chan_id, timer);
> + if (rc)
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +static int set_flash_strobe(struct qcom_flash_led *led, enum led_strobe strobe, bool state)
> +{
> + struct qcom_flash_chip *chip = flash_led_get_priv_data(led);
> + u8 strobe_sel, chan_en, chan_id, chan_mask = 0;
> + int rc, i;
> +
> + /* Set SW strobe config for all channels connected to the LED */
> + for (i = 0; i < led->chan_count; i++) {
> + chan_id = led->chan_id[i];
> +
> + if (strobe == SW_STROBE)
> + strobe_sel = FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, SW_STROBE_VAL);
> + else
> + strobe_sel = FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, HW_STROBE_VAL);
> +
> + strobe_sel |=
> + FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT, STROBE_LEVEL_TRIGGER_VAL) |
> + FIELD_PREP(FLASH_STROBE_POLARITY_BIT, STROBE_ACTIVE_HIGH_VAL);
> +
> + rc = regmap_fields_write(chip->r_fields[REG_CHAN_STROBE], chan_id, strobe_sel);
> + if (rc)
> + return rc;
> +
> + chan_mask |= BIT(chan_id);
> + }
> +
> + /* Enable/disable flash channels */
> + chan_en = state ? chan_mask : 0;
> + rc = regmap_field_update_bits(chip->r_fields[REG_CHAN_EN], chan_mask, chan_en);
> + if (rc)
> + return rc;
> +
> + led->enabled = state;
> + return 0;
> +}
> +
> +static int qcom_flash_brightness_set(struct led_classdev_flash *fled_cdev, u32 brightness)
> +{
> + struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
> +
> + led->flash_current_ma = min_t(u32, led->max_flash_current_ma, brightness / UA_PER_MA);
> + return 0;
> +}
> +
> +static int qcom_flash_timeout_set(struct led_classdev_flash *fled_cdev, u32 timeout)
> +{
> + struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
> +
> + led->flash_timeout_ms = timeout / USEC_PER_MSEC;
> + return 0;
> +}
> +
> +static int qcom_flash_strobe_set(struct led_classdev_flash *fled_cdev, bool state)
> +{
> + struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
> + int rc;
> +
> + rc = set_flash_current(led, led->flash_current_ma, FLASH_MODE);
> + if (rc)
> + return rc;
> +
> + rc = set_flash_timeout(led, led->flash_timeout_ms);
> + if (rc)
> + return rc;
> +
> + rc = set_flash_module_en(led, state);
> + if (rc)
> + return rc;
> +
> + return set_flash_strobe(led, SW_STROBE, state);
> +}
> +
> +static int qcom_flash_strobe_get(struct led_classdev_flash *fled_cdev, bool *state)
> +{
> + struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
> +
> + *state = led->enabled;
> + return 0;
> +}
> +
> +static int qcom_flash_fault_get(struct led_classdev_flash *fled_cdev, u32 *fault)
> +{
> + struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
> + struct qcom_flash_chip *chip = flash_led_get_priv_data(led);
> + u8 shift, chan_id, chan_mask = 0;
> + u8 ot_mask, oc_mask, uv_mask;
> + u32 val, fault_sts = 0;
> + int i, rc;
> +
> + rc = regmap_field_read(chip->r_fields[REG_STATUS1], &val);
> + if (rc)
> + return rc;
> +
> + for (i = 0; i < led->chan_count; i++) {
> + chan_id = led->chan_id[i];
> + shift = chan_id * 2;
> +
> + if (val & BIT(shift))
> + fault_sts |= LED_FAULT_SHORT_CIRCUIT;
> +
> + chan_mask |= BIT(chan_id);
> + }
> +
> + rc = regmap_field_read(chip->r_fields[REG_STATUS2], &val);
> + if (rc)
> + return rc;
> +
> + if (chip->hw_type == QCOM_MVFLASH_3CH) {
> + ot_mask = FLASH_STS_3CH_OTST1 |
> + FLASH_STS_3CH_OTST2 |
> + FLASH_STS_3CH_OTST3 |
> + FLASH_STS_3CH_BOB_THM_OVERLOAD;
> + oc_mask = FLASH_STS_3CH_BOB_ILIM_S1 |
> + FLASH_STS_3CH_BOB_ILIM_S2 |
> + FLASH_STS_3CH_BCL_IBAT;
> + uv_mask = FLASH_STS_3CH_VPH_DROOP;
> + } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> + ot_mask = FLASH_STS_4CH_OTST2 |
> + FLASH_STS_4CH_OTST1 |
> + FLASH_STS_4CHG_BOB_THM_OVERLOAD;
> + oc_mask = FLASH_STS_4CH_BCL_IBAT |
> + FLASH_STS_4CH_BOB_ILIM_S1 |
> + FLASH_STS_4CH_BOB_ILIM_S2;
> + uv_mask = FLASH_STS_4CH_VPH_LOW;
> + }
> +
> + if (val & ot_mask)
> + fault_sts |= LED_FAULT_OVER_TEMPERATURE;
> +
> + if (val & oc_mask)
> + fault_sts |= LED_FAULT_OVER_CURRENT;
> +
> + if (val & uv_mask)
> + fault_sts |= LED_FAULT_INPUT_VOLTAGE;
> +
> + rc = regmap_field_read(chip->r_fields[REG_STATUS3], &val);
> + if (rc)
> + return rc;
> +
> + if (chip->hw_type == QCOM_MVFLASH_3CH) {
> + if (val & chan_mask)
> + fault_sts |= LED_FAULT_TIMEOUT;
> + } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> + for (i = 0; i < led->chan_count; i++) {
> + chan_id = led->chan_id[i];
> + shift = chan_id * 2;
> +
> + if (val & BIT(shift))
> + fault_sts |= LED_FAULT_TIMEOUT;
> + }
> + }
> +
> + *fault = fault_sts;
> + return 0;
> +}
> +
> +static int qcom_flash_led_brightness_set(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct led_classdev_flash *fled_cdev =
> + container_of(led_cdev, struct led_classdev_flash, led_cdev);
lcdev_to_flcdev()
> + struct qcom_flash_led *led =
> + container_of(fled_cdev, struct qcom_flash_led, flash);
Please create a helper similar to above.
flcdev_to_qcom_fled()
> + u32 current_ma = brightness * led->max_torch_current_ma / LED_FULL;
> + bool enable = !!brightness;
> + int rc;
> +
> + rc = set_flash_current(led, current_ma, TORCH_MODE);
> + if (rc)
> + return rc;
> +
> + /* Disable flash timeout for torch LED */
> + rc = set_flash_timeout(led, 0);
> + if (rc)
> + return rc;
> +
> + rc = set_flash_module_en(led, enable);
> + if (rc)
> + return rc;
> +
> + return set_flash_strobe(led, SW_STROBE, enable);
> +}
> +
> +static const struct led_flash_ops qcom_flash_ops = {
> + .flash_brightness_set = qcom_flash_brightness_set,
> + .strobe_set = qcom_flash_strobe_set,
> + .strobe_get = qcom_flash_strobe_get,
> + .timeout_set = qcom_flash_timeout_set,
> + .fault_get = qcom_flash_fault_get,
> +};
> +
> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> +static int qcom_flash_external_strobe_set(struct v4l2_flash *v4l2_flash, bool enable)
> +{
> + struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> + struct qcom_flash_led *led = container_of(flash, struct qcom_flash_led, flash);
> + int rc;
> +
> + rc = set_flash_module_en(led, enable);
> + if (rc)
> + return rc;
> +
> + if (enable)
> + return set_flash_strobe(led, HW_STROBE, true);
> + else
> + return set_flash_strobe(led, SW_STROBE, false);
> +}
> +
> +static enum led_brightness
> +qcom_flash_intensity_to_led_brightness(struct v4l2_flash *v4l2_flash, s32 intensity)
> +{
> + struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> + struct qcom_flash_led *led = container_of(flash, struct qcom_flash_led, flash);
> + u32 current_ma = intensity / UA_PER_MA;
> +
> + current_ma = min_t(u32, current_ma, led->max_torch_current_ma);
> + if (!current_ma)
> + return LED_OFF;
> +
> + return (current_ma * LED_FULL) / led->max_torch_current_ma;
> +}
> +
> +static s32 qcom_flash_brightness_to_led_intensity(struct v4l2_flash *v4l2_flash,
> + enum led_brightness brightness)
> +{
> + struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> + struct qcom_flash_led *led = container_of(flash, struct qcom_flash_led, flash);
> +
> + return (brightness * led->max_torch_current_ma * UA_PER_MA) / LED_FULL;
> +}
> +
> +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
> + .external_strobe_set = qcom_flash_external_strobe_set,
> + .intensity_to_led_brightness = qcom_flash_intensity_to_led_brightness,
> + .led_brightness_to_intensity = qcom_flash_brightness_to_led_intensity,
> +};
> +
> +static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct fwnode_handle *fwnode)
> +{
> + struct qcom_flash_chip *chip = flash_led_get_priv_data(led);
> + struct v4l2_flash_config v4l2_cfg = { 0 };
> + struct led_flash_setting *intensity = &v4l2_cfg.intensity;
> +
> + if (!(led->flash.led_cdev.flags & LED_DEV_CAP_FLASH))
> + return 0;
> +
> + intensity->min = intensity->step = TORCH_IRES_UA * led->chan_count;
> + intensity->max = led->max_torch_current_ma * UA_PER_MA;
> + intensity->val = min_t(u32, intensity->max, TORCH_CURRENT_DEFAULT_UA);
> +
> + strscpy(v4l2_cfg.dev_name, led->flash.led_cdev.dev->kobj.name,
> + sizeof(v4l2_cfg.dev_name));
> +
> + v4l2_cfg.has_external_strobe = true;
> + v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE |
> + LED_FAULT_OVER_CURRENT |
> + LED_FAULT_SHORT_CIRCUIT |
> + LED_FAULT_OVER_TEMPERATURE |
> + LED_FAULT_TIMEOUT;
> +
> + led->v4l2_flash = v4l2_flash_init(chip->dev, fwnode, &led->flash,
> + &qcom_v4l2_flash_ops, &v4l2_cfg);
> + return PTR_ERR_OR_ZERO(led->v4l2_flash);
> +}
> +# else
> +static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct fwnode_handle *fwnode)
> +{
> + return 0;
> +}
> +#endif
> +
> +static int qcom_flash_register_led_device(struct device *parent,
> + struct fwnode_handle *node, struct qcom_flash_led *led)
> +{
> + struct qcom_flash_chip *chip = flash_led_get_priv_data(led);
> + struct led_init_data init_data;
> + struct led_classdev_flash *flash = &led->flash;
> + struct led_flash_setting *brightness, *timeout;
> + u32 count, current_ua, timeout_us;
> + u32 channels[4];
> + int i, rc;
> +
> + count = fwnode_property_count_u32(node, "led-sources");
> + if (count <= 0) {
> + dev_err(chip->dev, "No led-sources specified\n");
> + return -ENODEV;
> + }
> +
> + if (count > chip->max_channels) {
> + dev_err(chip->dev, "led-sources count %u exceeds maximum channel count %u\n",
> + count, chip->max_channels);
> + return -EINVAL;
> + }
> +
> + rc = fwnode_property_read_u32_array(node, "led-sources", channels, count);
> + if (rc < 0) {
> + dev_err(chip->dev, "Failed to read led-sources property, rc=%d\n", rc);
> + return rc;
> + }
> +
> + led->chan_count = count;
> + led->chan_id = devm_kcalloc(chip->dev, count, sizeof(u8), GFP_KERNEL);
> + if (!led->chan_id)
> + return -ENOMEM;
> +
> + for (i = 0; i < count; i++) {
> + if ((channels[i] == 0) || (channels[i] > chip->max_channels)) {
> + dev_err(chip->dev, "led-source out of HW support range [1-%u]\n",
> + chip->max_channels);
> + return -EINVAL;
> + }
> +
> + /* Make chan_id indexing from 0 */
> + led->chan_id[i] = channels[i] - 1;
> + }
> +
> + rc = fwnode_property_read_u32(node, "led-max-microamp", ¤t_ua);
> + if (rc < 0) {
> + dev_err(chip->dev, "Failed to read led-max-microamp property, rc=%d\n", rc);
> + return rc;
> + }
> +
> + if (current_ua == 0) {
> + dev_err(chip->dev, "led-max-microamp shouldn't be 0\n");
> + return -EINVAL;
> + }
> +
> + current_ua = min_t(u32, current_ua, TORCH_CURRENT_MAX_UA * led->chan_count);
> + led->max_torch_current_ma = current_ua / UA_PER_MA;
> +
> + if (fwnode_property_present(node, "flash-max-microamp")) {
> + flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
> +
> + rc = fwnode_property_read_u32(node, "flash-max-microamp", ¤t_ua);
> + if (rc < 0) {
> + dev_err(chip->dev, "Failed to read flash-max-microamp property, rc=%d\n",
> + rc);
> + return rc;
> + }
> +
> + current_ua = min_t(u32, current_ua, FLASH_CURRENT_MAX_UA * led->chan_count);
> + current_ua = min_t(u32, current_ua, FLASH_TOTAL_CURRENT_MAX_UA);
> +
> + /* Initialize flash class LED device brightness settings */
> + brightness = &flash->brightness;
> + brightness->min = brightness->step = FLASH_IRES_UA * led->chan_count;
> + brightness->max = current_ua;
> + brightness->val = min_t(u32, current_ua, FLASH_CURRENT_DEFAULT_UA);
> +
> + led->max_flash_current_ma = current_ua / UA_PER_MA;
> + led->flash_current_ma = brightness->val / UA_PER_MA;
> +
> + rc = fwnode_property_read_u32(node, "flash-max-timeout-us", &timeout_us);
> + if (rc < 0) {
> + dev_err(chip->dev, "Failed to read flash-max-timeout-us property, rc=%d\n",
> + rc);
> + return rc;
> + }
> +
> + timeout_us = min_t(u32, timeout_us, FLASH_TIMEOUT_MAX_US);
> +
> + /* Initialize flash class LED device timeout settings */
> + timeout = &flash->timeout;
> + timeout->min = timeout->step = FLASH_TIMEOUT_STEP_US;
> + timeout->val = timeout->max = timeout_us;
> +
> + led->max_timeout_ms = led->flash_timeout_ms = timeout_us / USEC_PER_MSEC;
> +
> + flash->ops = &qcom_flash_ops;
> + }
> +
> + flash->led_cdev.brightness_set_blocking = qcom_flash_led_brightness_set;
> +
> + init_data.fwnode = node;
> + init_data.devicename = NULL;
> + init_data.default_label = NULL;
> + init_data.devname_mandatory = false;
> +
> + rc = devm_led_classdev_flash_register_ext(parent, flash, &init_data);
> + if (rc < 0) {
> + dev_err(chip->dev, "Register flash LED classdev failed, rc=%d\n", rc);
> + return rc;
> + }
> +
> + return qcom_flash_v4l2_init(led, node);
> +}
> +
> +static int qcom_flash_led_probe(struct platform_device *pdev)
> +{
> + struct qcom_flash_chip *chip;
> + struct qcom_flash_led *led;
> + struct fwnode_handle *child;
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap;
> + struct reg_field *regs;
> + int count, i, rc;
> + u32 val, reg_base;
> +
> + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + regmap = dev_get_regmap(dev->parent, NULL);
> + if (!regmap) {
> + dev_err(dev, "Failed to get parent regmap\n");
> + return -EINVAL;
> + }
> +
> + rc = fwnode_property_read_u32(dev->fwnode, "reg", ®_base);
> + if (rc < 0) {
> + dev_err(dev, "Failed to get register base address, rc=%d\n", rc);
> + return rc;
> + }
> +
> + rc = regmap_read(regmap, reg_base + FLASH_TYPE_REG, &val);
> + if (rc < 0) {
> + dev_err(dev, "Read flash LED module type failed, rc=%d\n", rc);
> + return rc;
> + }
> +
> + if (val != FLASH_TYPE_VAL) {
> + dev_err(dev, "type %#x is not a flash LED module\n", val);
> + return -ENODEV;
> + }
> +
> + rc = regmap_read(regmap, reg_base + FLASH_SUBTYPE_REG, &val);
> + if (rc < 0) {
> + dev_err(dev, "Read flash LED module subtype failed, rc=%d\n", rc);
> + return rc;
> + }
> +
> + if (val == FLASH_SUBTYPE_3CH_VAL) {
> + chip->hw_type = QCOM_MVFLASH_3CH;
> + chip->max_channels = 3;
> + regs = mvflash_3ch_regs;
> + } else if (val == FLASH_SUBTYPE_4CH_VAL) {
> + chip->hw_type = QCOM_MVFLASH_4CH;
> + chip->max_channels = 4;
> + regs = mvflash_4ch_regs;
> + } else {
> + dev_err(dev, "flash LED subtype %#x is not yet supported\n", val);
> + return -ENODEV;
> + }
> +
> + for (i = 0; i < REG_MAX_COUNT; i++)
> + regs[i].reg += reg_base;
> +
> + rc = devm_regmap_field_bulk_alloc(dev, regmap, chip->r_fields, regs, REG_MAX_COUNT);
> + if (rc < 0) {
> + dev_err(dev, "Failed to allocate regmap field, rc=%d\n", rc);
> + return rc;
> + }
> +
> + chip->dev = dev;
> + platform_set_drvdata(pdev, chip);
> + mutex_init(&chip->lock);
> +
> + count = device_get_child_node_count(dev);
> + if (count == 0 || count > chip->max_channels) {
> + dev_err(dev, "No child or child count exceeds %d\n", chip->max_channels);
> + return -EINVAL;
> + }
> +
> + chip->leds = devm_kcalloc(dev, count, sizeof(*chip->leds), GFP_KERNEL);
> + if (!chip->leds)
> + return -ENOMEM;
> +
> + device_for_each_child_node(dev, child) {
> + led = &chip->leds[chip->leds_count];
> + led->priv_data = chip;
> +
> + rc = qcom_flash_register_led_device(dev, child, led);
> + if (rc < 0)
> + goto release;
> +
> + chip->leds_count++;
> + }
> +
> + return 0;
> +
> +release:
> + while (chip->leds && chip->leds_count--)
> + v4l2_flash_release(chip->leds[chip->leds_count].v4l2_flash);
> + return rc;
> +}
> +
> +static int qcom_flash_led_remove(struct platform_device *pdev)
> +{
> + struct qcom_flash_chip *chip = platform_get_drvdata(pdev);
> +
> + while (chip->leds_count--)
> + v4l2_flash_release(chip->leds[chip->leds_count].v4l2_flash);
> +
> + mutex_destroy(&chip->lock);
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_flash_led_match_table[] = {
> + { .compatible = "qcom,spmi-flash-led" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, qcom_flash_led_match_table);
> +static struct platform_driver qcom_flash_led_driver = {
> + .driver = {
> + .name = "leds-qcom-flash",
> + .of_match_table = qcom_flash_led_match_table,
> + },
> + .probe = qcom_flash_led_probe,
> + .remove = qcom_flash_led_remove,
> +};
> +
> +module_platform_driver(qcom_flash_led_driver);
> +
> +MODULE_DESCRIPTION("QCOM Flash LED driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
--
Lee Jones [李琼斯]