Re: [PATCH 2/2] mailbox: pcc: Support shared interrupt for multiple subspaces

From: lihuisong (C)
Date: Wed Mar 01 2023 - 21:17:17 EST


在 2023/3/1 21:36, Sudeep Holla 写道:
On Thu, Feb 16, 2023 at 02:36:53PM +0800, Huisong Li wrote:
If the platform acknowledge interrupt is level triggered, then it can
be shared by multiple subspaces provided each one has a unique platform
interrupt ack preserve and ack set masks.

If it can be shared, then we can request the irq with IRQF_SHARED and
IRQF_ONESHOT flags. The first one indicating it can be shared and the
latter one to keep the interrupt disabled until the hardirq handler
finished.

Further, since there is no way to detect if the interrupt is for a given
channel as the interrupt ack preserve and ack set masks are for clearing
the interrupt and not for reading the status(in case Irq Ack register
may be write-only on some platforms), we need a way to identify if the
given channel is in use and expecting the interrupt.

PCC type0, type1 and type5 do not support shared level triggered interrupt.
The methods of determining whether a given channel for remaining types
should respond to an interrupt are as follows:
- type2: Whether the interrupt belongs to a given channel is only
determined by the status field in Generic Communications Channel
Shared Memory Region, which is done in rx_callback of PCC client.
- type3: This channel checks chan_in_use flag first and then checks the
command complete bit(value '1' indicates that the command has
been completed).
- type4: Platform ensure that the default value of the command complete
bit corresponding to the type4 channel is '1'. This command
complete bit is '0' when receive a platform notification.

Signed-off-by: Huisong Li <lihuisong@xxxxxxxxxx>
---
drivers/mailbox/pcc.c | 45 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 42 insertions(+), 3 deletions(-)

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index ecd54f049de3..04c2d73a0473 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -92,6 +92,10 @@ struct pcc_chan_reg {
* @error: PCC register bundle for the error status register
* @plat_irq: platform interrupt
* @type: PCC subspace type
+ * @plat_irq_flags: platform interrupt flags
+ * @chan_in_use: flag indicating whether the channel is in use or not when use
+ * platform interrupt, and only use it for communication from OSPM
+ * to Platform, like type 3.
Also add a node that since only one transfer can occur at a time and the
mailbox takes care of locking, this flag needs no locking and is used just
to check if the interrupt needs handling when it is shared.
Add a per-channel lock. Is this your mean?

*/
struct pcc_chan_info {
struct pcc_mbox_chan chan;
@@ -102,6 +106,8 @@ struct pcc_chan_info {
struct pcc_chan_reg error;
int plat_irq;
u8 type;
+ unsigned int plat_irq_flags;
+ bool chan_in_use;
};
#define to_pcc_chan_info(c) container_of(c, struct pcc_chan_info, chan)
@@ -225,6 +231,12 @@ static int pcc_map_interrupt(u32 interrupt, u32 flags)
return acpi_register_gsi(NULL, interrupt, trigger, polarity);
}
+static bool pcc_chan_plat_irq_can_be_shared(struct pcc_chan_info *pchan)
+{
+ return (pchan->plat_irq_flags & ACPI_PCCT_INTERRUPT_MODE) ==
+ ACPI_LEVEL_SENSITIVE;
+}
+
static bool pcc_chan_command_complete(struct pcc_chan_info *pchan,
u64 cmd_complete_reg_val)
{
@@ -277,6 +289,9 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
int ret;
pchan = chan->con_priv;
+ if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE &&
+ !pchan->chan_in_use)
+ return IRQ_NONE;
ret = pcc_chan_reg_read(&pchan->cmd_complete, &val);
if (ret)
@@ -302,9 +317,13 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
/*
* The PCC slave subspace channel needs to set the command complete bit
* and ring doorbell after processing message.
+ *
+ * The PCC master subspace channel clears chan_in_use to free channel.
*/
if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE)
pcc_send_data(chan, NULL);
+ else if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE)
+ pchan->chan_in_use = false;
Just wondering if this has to be for type 3 only. I am trying to avoid
conditional update of this flag, can we not do it for everything except type4 ?
(I mean just in unconditional else part)
But type2 do not need this flag.
For types no need this flag, it is always hard to understand and redundant design.
If no this condition, we don't know what is the impact on the furture types.

return IRQ_HANDLED;
}
@@ -353,10 +372,13 @@ pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id)
spin_unlock_irqrestore(&chan->lock, flags);
if (pchan->plat_irq > 0) {
+ unsigned long irqflags;
int rc;
- rc = devm_request_irq(dev, pchan->plat_irq, pcc_mbox_irq, 0,
- MBOX_IRQ_NAME, chan);
+ irqflags = pcc_chan_plat_irq_can_be_shared(pchan) ?
+ IRQF_SHARED | IRQF_ONESHOT : 0;
+ rc = devm_request_irq(dev, pchan->plat_irq, pcc_mbox_irq,
+ irqflags, MBOX_IRQ_NAME, chan);
if (unlikely(rc)) {
dev_err(dev, "failed to register PCC interrupt %d\n",
pchan->plat_irq);
@@ -418,7 +440,17 @@ static int pcc_send_data(struct mbox_chan *chan, void *data)
if (ret)
return ret;
- return pcc_chan_reg_read_modify_write(&pchan->db);
+ ret = pcc_chan_reg_read_modify_write(&pchan->db);
+ /*
+ * For the master subspace channel, set chan_in_use flag to true after
+ * ring doorbell, and clear this flag when the reply message is
+ * processed.
+ */
+ if (!ret && pchan->type == ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE &&
+ pchan->plat_irq > 0)
+ pchan->chan_in_use = true;
Ditto here(for all type except type 4?)
Above is my concern.