[PATCH v8 0/2] Add LED driver for flash module in QCOM PMICs

[Fenglin Wu]

Initial driver and binding document changes for supporting flash LED
module in Qualcomm Technologies, Inc. PMICs.

Changes in V8:
  1. Introduce a helper function 'flcdev_to_qcom_fled()'.
  2. Rename 'struct qcom_flash_chip' as 'struct qcom_flash_data' and
     remove 'qcom_flash_led' data pointers from it to avoid interwoven
     reference. Also remove the 'dev' pointer.
  3. Remove 'v4l2_flash' data pointer in 'struct qcom_flash_led' and
     move it to 'struct qcom_flash_data'.
	
Changes in V7:
  1. Fix compilation issue reported by kernel test robot

Changes in V6:
  1. Update the driver to address review comments from Jones,Lee.

Changes in V5:
  1. Add MODULE_DEVICE_TABLE for auto-loading.

Changes in V4:
  1. Added Tested-By tag.
  2. Addressed review comments in the binding change and added
     Reviewed-by tag.

Changes in V3:
  1. Updated the driver to use regmap_field for register access.
  2. Adressed the review comments in binding document change.

Changes in V2:
  1. Addressed review comments in binding change, thanks Krzysztof!
  2. Updated driver to address the compilation issue reported by
     kernel test robot.


Fenglin Wu (2):
  leds: flash: add driver to support flash LED module in QCOM PMICs
  dt-bindings: leds: add QCOM flash LED controller

 .../bindings/leds/qcom,spmi-flash-led.yaml    | 116 +++
 drivers/leds/flash/Kconfig                    |  15 +
 drivers/leds/flash/Makefile                   |   1 +
 drivers/leds/flash/leds-qcom-flash.c          | 773 ++++++++++++++++++
 4 files changed, 905 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
 create mode 100644 drivers/leds/flash/leds-qcom-flash.c

-- 
2.25.1