Re: [PATCH v5 06/12] net: stmmac: Add glue layer for StarFive JH7110 SoC

From: Emil Renner Berthing
Date: Fri Mar 03 2023 - 11:18:46 EST

On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@xxxxxxxxxxxxxxxx> wrote:
> This adds StarFive dwmac driver support on the StarFive JH7110 SoC.
>
> Co-developed-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
> ---
> MAINTAINERS | 1 +
> drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> .../ethernet/stmicro/stmmac/dwmac-starfive.c | 125 ++++++++++++++++++
> 4 files changed, 139 insertions(+)
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4e236b7c7fd2..91a4f190c827 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19916,6 +19916,7 @@ STARFIVE DWMAC GLUE LAYER
> M: Emil Renner Berthing <kernel@xxxxxxxx>
> M: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
> S: Maintained
> +F: Documentation/devicetree/bindings/net/dwmac-starfive.c
> F: Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>
> STARFIVE JH71X0 CLOCK DRIVERS
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index f77511fe4e87..47fbccef9d04 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -165,6 +165,18 @@ config DWMAC_SOCFPGA
> for the stmmac device driver. This driver is used for
> arria5 and cyclone5 FPGA SoCs.
>
> +config DWMAC_STARFIVE
> + tristate "StarFive dwmac support"
> + depends on OF && (ARCH_STARFIVE || COMPILE_TEST)

There is an extra space between "OF" and "&&" here.


> + depends on STMMAC_ETH

It's not visible in this patch context, but this whole config option
is surrounded by "if STMMAC_ETH" and "if STMMAC_PLATFORM", so "depends
on STMMAC_ETH" should not be needed.

> + default ARCH_STARFIVE

This driver is not required to boot the JH7110, so we should just
default to building it as a module. Eg.
default m if ARCH_STARFIVE

> + help
> + Support for ethernet controllers on StarFive RISC-V SoCs
> +
> + This selects the StarFive platform specific glue layer support for
> + the stmmac device driver. This driver is used for StarFive JH7110
> + ethernet controller.
> +
> config DWMAC_STI
> tristate "STi GMAC support"
> default ARCH_STI
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index 057e4bab5c08..8738fdbb4b2d 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_DWMAC_OXNAS) += dwmac-oxnas.o
> obj-$(CONFIG_DWMAC_QCOM_ETHQOS) += dwmac-qcom-ethqos.o
> obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
> obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
> +obj-$(CONFIG_DWMAC_STARFIVE) += dwmac-starfive.o
> obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
> obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
> obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
> new file mode 100644
> index 000000000000..566378306f67
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
> @@ -0,0 +1,125 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * StarFive DWMAC platform driver
> + *
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>

Sorry, after looking at my old git branches where this started as a
driver for the JH7100 this should really be
* Copyright (C) 2021 Emil Renner Berthing <kernel@xxxxxxxx>
* Copyright (C) 2022 StarFive Technology Co., Ltd.

> + */
> +
> +#include <linux/of_device.h>
> +
> +#include "stmmac_platform.h"
> +
> +struct starfive_dwmac {
> + struct device *dev;
> + struct clk *clk_tx;
> + struct clk *clk_gtx;

This pointer is only set, but never read. Please remove it.

> + bool tx_use_rgmii_rxin_clk;
> +};
> +
> +static void starfive_eth_fix_mac_speed(void *priv, unsigned int speed)

This should be starfive_dwmac_fix_mac_speed for consistency.

> +{
> + struct starfive_dwmac *dwmac = priv;
> + unsigned long rate;
> + int err;
> +
> + /* Generally, the rgmii_tx clock is provided by the internal clock,
> + * which needs to match the corresponding clock frequency according
> + * to different speeds. If the rgmii_tx clock is provided by the
> + * external rgmii_rxin, there is no need to configure the clock
> + * internally, because rgmii_rxin will be adaptively adjusted.
> + */
> + if (dwmac->tx_use_rgmii_rxin_clk)
> + return;

If this function is only needed in certain situations, why not just
set the plat_dat->fix_mac_speed callback when it is needed?

> + switch (speed) {
> + case SPEED_1000:
> + rate = 125000000;
> + break;
> + case SPEED_100:
> + rate = 25000000;
> + break;
> + case SPEED_10:
> + rate = 2500000;
> + break;
> + default:
> + dev_err(dwmac->dev, "invalid speed %u\n", speed);
> + break;
> + }
> +
> + err = clk_set_rate(dwmac->clk_tx, rate);
> + if (err)
> + dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
> +}
> +
> +static int starfive_dwmac_probe(struct platform_device *pdev)
> +{
> + struct plat_stmmacenet_data *plat_dat;
> + struct stmmac_resources stmmac_res;
> + struct starfive_dwmac *dwmac;
> + int err;
> +
> + err = stmmac_get_platform_resources(pdev, &stmmac_res);
> + if (err)
> + return err;
> +
> + plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
> + if (IS_ERR(plat_dat)) {
> + dev_err(&pdev->dev, "dt configuration failed\n");
> + return PTR_ERR(plat_dat);
> + }
> +
> + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
> + if (!dwmac)
> + return -ENOMEM;
> +
> + dwmac->clk_tx = devm_clk_get_enabled(&pdev->dev, "tx");
> + if (IS_ERR(dwmac->clk_tx))
> + return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_tx),
> + "error getting tx clock\n");
> +
> + dwmac->clk_gtx = devm_clk_get_enabled(&pdev->dev, "gtx");
> + if (IS_ERR(dwmac->clk_gtx))
> + return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_gtx),
> + "error getting gtx clock\n");
> +
> + if (device_property_read_bool(&pdev->dev, "starfive,tx-use-rgmii-clk"))
> + dwmac->tx_use_rgmii_rxin_clk = true;
> +
> + dwmac->dev = &pdev->dev;
> + plat_dat->fix_mac_speed = starfive_eth_fix_mac_speed;

Eg.:
if (!device_property_read_bool(&pdev->dev, "starfive,tx_use_rgmii_clk"))
plat_dat->fix_mac_speed = starfive_dwmac_fix_mac_speed;

> + plat_dat->init = NULL;
> + plat_dat->bsp_priv = dwmac;
> + plat_dat->dma_cfg->dche = true;
> +
> + err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
> + if (err) {
> + stmmac_remove_config_dt(pdev, plat_dat);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id starfive_dwmac_match[] = {
> + { .compatible = "starfive,jh7110-dwmac" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, starfive_dwmac_match);
> +
> +static struct platform_driver starfive_dwmac_driver = {
> + .probe = starfive_dwmac_probe,
> + .remove = stmmac_pltfr_remove,
> + .driver = {
> + .name = "starfive-dwmac",
> + .pm = &stmmac_pltfr_pm_ops,
> + .of_match_table = starfive_dwmac_match,
> + },
> +};
> +module_platform_driver(starfive_dwmac_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("StarFive DWMAC platform driver");
> +MODULE_AUTHOR("Emil Renner Berthing <kernel@xxxxxxxx>");
> +MODULE_AUTHOR("Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>");
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv