[PATCH 05/19] PCI: qcom: Use lower case for hex

[Manivannan Sadhasivam]

To maintain uniformity, let's use lower case for representing hexadecimal
numbers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 926a531fda3a..4179ac973147 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -39,17 +39,17 @@
 #define PARF_PCS_DEEMPH				0x34
 #define PARF_PCS_SWING				0x38
 #define PARF_PHY_CTRL				0x40
-#define PARF_PHY_REFCLK				0x4C
+#define PARF_PHY_REFCLK				0x4c
 #define PARF_CONFIG_BITS			0x50
 #define PARF_DBI_BASE_ADDR			0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16C /* Register offset specific to IP ver 2.3.3 */
+#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
 #define PARF_MHI_CLOCK_RESET_CTRL		0x174
 #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
-#define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1A8
-#define PARF_Q2A_FLUSH				0x1AC
-#define PARF_LTSSM				0x1B0
+#define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
+#define PARF_Q2A_FLUSH				0x1ac
+#define PARF_LTSSM				0x1b0
 #define PARF_SID_OFFSET				0x234
-#define PARF_BDF_TRANSLATE_CFG			0x24C
+#define PARF_BDF_TRANSLATE_CFG			0x24c
 #define PARF_SLV_ADDR_SPACE_SIZE		0x358
 #define PARF_DEVICE_TYPE			0x1000
 #define PARF_BDF_TO_SID_TABLE_N			0x2000
@@ -60,7 +60,7 @@
 /* DBI registers */
 #define AXI_MSTR_RESP_COMP_CTRL0		0x818
 #define AXI_MSTR_RESP_COMP_CTRL1		0x81c
-#define MISC_CONTROL_1_REG			0x8BC
+#define MISC_CONTROL_1_REG			0x8bc
 
 /* PARF_SYS_CTRL register fields */
 #define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN	BIT(29)
-- 
2.25.1