[PATCH 02/18] pata_parport: probe all units automatically

From: Ondrej Zary
Date: Mon Mar 06 2023 - 12:56:18 EST


Only unit 0 is probed after registering a protocol driver or attaching
a new parport. This causes bpck and bpck6 devices to be not detected
automatically.
Probe all units just like in manual device creation (using sysfs).

Reviewed-by: Sergey Shtylyov <s.shtylyov@xxxxxx>
Signed-off-by: Ondrej Zary <linux@xxxxxxx>
---
drivers/ata/pata_parport/pata_parport.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index 294a266a0dda..49e99c9465fd 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -530,7 +530,7 @@ int pata_parport_register_driver(struct pi_protocol *pr)
if (probe) {
/* probe all parports using this protocol */
idr_for_each_entry(&parport_list, parport, port_num)
- pi_init_one(parport, pr, -1, 0, -1);
+ pi_init_one(parport, pr, -1, -1, -1);
}
mutex_unlock(&pi_mutex);

@@ -665,7 +665,7 @@ static void pata_parport_attach(struct parport *port)
if (probe) {
/* probe this port using all protocols */
idr_for_each_entry(&protocols, pr, pr_num)
- pi_init_one(port, pr, -1, 0, -1);
+ pi_init_one(port, pr, -1, -1, -1);
}
mutex_unlock(&pi_mutex);
}
--
Ondrej Zary