[PATCH 09/11] arm64: dtsi: qcom: ipq5018: enable nodes required for multipd

[Manikanta Mylavarapu]

Enable nodes required for multipd remoteproc bring up

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 130 ++++++++++++++++++++++++++
 1 file changed, 130 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 084fb7b30dfd..4fa0990ab543 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -95,6 +95,24 @@ tz: tz@4ac00000 {
 			reg = <0x0 0x4ac00000 0x0 0x00400000>;
 			no-map;
 		};
+
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01700000>;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x00100000>;
+			hwlocks = <&tcsr_mutex 0>;
+			no-map;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5018", "qcom,scm";
+		};
 	};
 
 	timer {
@@ -105,6 +123,30 @@ timer {
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	wcss: wcss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 9>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -217,5 +259,93 @@ frame@b128000 {
 				status = "disabled";
 			};
 		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x8000>;
+			#hwlock-cells = <1>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			#mbox-cells = <1>;
+		};
+
+		q6v5_wcss: remoteproc@cd00000 {
+			compatible = "qcom,ipq5018-q6-mpd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x0cd00000 0x4040>;
+			interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 0 0>,
+					      <&wcss_smp2p_in 1 0>,
+					      <&wcss_smp2p_in 2 0>,
+					      <&wcss_smp2p_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			qcom,smem-states = <&wcss_smp2p_out 0>,
+					   <&wcss_smp2p_out 1>;
+			qcom,smem-state-names = "shutdown",
+						"stop";
+			memory-region = <&q6_region>;
+
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "rtr";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 8>;
+			};
+
+			q6_wcss_pd1: remoteproc_pd1 {
+				compatible = "qcom,ipq5018-wcss-ahb-mpd";
+			};
+
+			q6_wcss_pd2: remoteproc_pd2 {
+				compatible = "qcom,ipq5018-wcss-pcie-mpd";
+				interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+				interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+				qcom,smem-states = <&wcss_smp2p_out 16>,
+						<&wcss_smp2p_out 17>,
+						<&wcss_smp2p_out 18>;
+				qcom,smem-state-names = "shutdown",
+							"stop",
+							"spawn";
+				status = "disabled";
+			};
+
+			q6_wcss_pd3: remoteproc_pd3 {
+				compatible = "qcom,ipq5018-wcss-pcie-mpd";
+				interrupts-extended = <&wcss_smp2p_in 24 0>,
+							<&wcss_smp2p_in 25 0>,
+							<&wcss_smp2p_in 28 0>,
+							<&wcss_smp2p_in 27 0>;
+				interrupt-names = "fatal",
+						"ready",
+						"spawn-ack",
+						"stop-ack";
+
+				qcom,smem-states = <&wcss_smp2p_out 24>,
+						<&wcss_smp2p_out 25>,
+						<&wcss_smp2p_out 26>;
+				qcom,smem-state-names = "shutdown",
+							"stop",
+							"spawn";
+				status = "disabled";
+			};
+		};
 	};
 };
-- 
2.34.1