[PATCH v8 6/6] Documentation: cpufreq: amd-pstate: Update amd_pstate status sysfs for guided

[Wyes Karny]

Update amd_pstate status sysfs for guided mode.

Acked-by: Huang Rui <ray.huang@xxxxxxx>
Reviewed-by: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Tested-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
Signed-off-by: Wyes Karny <wyes.karny@xxxxxxx>
---
 Documentation/admin-guide/pm/amd-pstate.rst | 31 ++++++++++++++++-----
 1 file changed, 24 insertions(+), 7 deletions(-)

diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index 6e5298b521b1..1cf40f69278c 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -303,13 +303,18 @@ efficiency frequency management method on AMD processors.
 AMD Pstate Driver Operation Modes
 =================================
 
-``amd_pstate`` CPPC has two operation modes: CPPC Autonomous(active) mode and
-CPPC non-autonomous(passive) mode.
-active mode and passive mode can be chosen by different kernel parameters.
-When in Autonomous mode, CPPC ignores requests done in the Desired Performance
-Target register and takes into account only the values set to the Minimum requested
-performance, Maximum requested performance, and Energy Performance Preference
-registers. When Autonomous is disabled, it only considers the Desired Performance Target.
+``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode,
+non-autonomous (passive) mode and guided autonomous (guided) mode.
+Active/passive/guided mode can be chosen by different kernel parameters.
+
+- In autonomous mode, platform ignores the desired performance level request
+  and takes into account only the values set to the minimum, maximum and energy
+  performance preference registers.
+- In non-autonomous mode, platform gets desired performance level
+  from OS directly through Desired Performance Register.
+- In guided-autonomous mode, platform sets operating performance level
+  autonomously according to the current workload and within the limits set by
+  OS through min and max performance registers.
 
 Active Mode
 ------------
@@ -338,6 +343,15 @@ to the Performance Reduction Tolerance register. Above the nominal performance l
 processor must provide at least nominal performance requested and go higher if current
 operating conditions allow.
 
+Guided Mode
+-----------
+
+``amd_pstate=guided``
+
+If ``amd_pstate=guided`` is passed to kernel command line option then this mode
+is activated.  In this mode, driver requests minimum and maximum performance
+level and the platform autonomously selects a performance level in this range
+and appropriate to the current workload.
 
 User Space Interface in ``sysfs`` - General
 ===========================================
@@ -358,6 +372,9 @@ control its functionality at the system level.  They are located in the
 	"passive"
 		The driver is functional and in the ``passive mode``
 
+	"guided"
+		The driver is functional and in the ``guided mode``
+
 	"disable"
 		The driver is unregistered and not functional now.
 
-- 
2.34.1