[PATCH 07/10] scsi: lpfc: Drop redundant pci_enable_pcie_error_reporting()
From: Bjorn Helgaas
Date: Tue Mar 07 2023 - 13:39:34 EST
From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: James Smart <james.smart@xxxxxxxxxxxx>
Cc: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc.h | 2 -
drivers/scsi/lpfc/lpfc_attr.c | 96 ++++++++++-------------------------
drivers/scsi/lpfc/lpfc_init.c | 1 -
drivers/scsi/lpfc/lpfc_sli.c | 55 --------------------
4 files changed, 27 insertions(+), 127 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index cf55f8e3bd9f..5e3a93d13a91 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1036,7 +1036,6 @@ struct lpfc_hba {
#define FCF_TS_INPROG 0x200 /* FCF table scan in progress */
#define FCF_RR_INPROG 0x400 /* FCF roundrobin flogi in progress */
#define HBA_FIP_SUPPORT 0x800 /* FIP support in HBA */
-#define HBA_AER_ENABLED 0x1000 /* AER enabled with HBA */
#define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */
#define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */
#define HBA_IOQ_FLUSH 0x8000 /* FCP/NVME I/O queues being flushed */
@@ -1190,7 +1189,6 @@ struct lpfc_hba {
#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP
#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP
#endif
- uint32_t cfg_aer_support;
uint32_t cfg_sriov_nr_virtfn;
uint32_t cfg_request_firmware_upgrade;
uint32_t cfg_suppress_link_up;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 22f2e046e8eb..5cc7b59b528f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4365,13 +4365,22 @@ static DEVICE_ATTR_RW(lpfc_link_speed);
/*
# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
-# 0 = aer disabled or not supported
# 1 = aer supported and enabled (default)
-# Value range is [0,1]. Default value is 1.
+# PCIe error reporting is always enabled by the PCI core, so this always
+# shows 1.
+#
+# N.B. Parts of LPFC_ATTR open-coded since some of the underlying
+# infrastructure (phba->cfg_aer_support) is gone.
*/
-LPFC_ATTR(aer_support, 1, 0, 1,
- "Enable PCIe device AER support");
-lpfc_param_show(aer_support)
+static uint lpfc_aer_support = 1;
+module_param(lpfc_aer_support, uint, S_IRUGO);
+MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
+static ssize_t
+lpfc_aer_support_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", lpfc_aer_support);
+}
/**
* lpfc_aer_support_store - Set the adapter for aer support
@@ -4382,76 +4391,27 @@ lpfc_param_show(aer_support)
* @count: unused variable.
*
* Description:
- * If the val is 1 and currently the device's AER capability was not
- * enabled, invoke the kernel's enable AER helper routine, trying to
- * enable the device's AER capability. If the helper routine enabling
- * AER returns success, update the device's cfg_aer_support flag to
- * indicate AER is supported by the device; otherwise, if the device
- * AER capability is already enabled to support AER, then do nothing.
- *
- * If the val is 0 and currently the device's AER support was enabled,
- * invoke the kernel's disable AER helper routine. After that, update
- * the device's cfg_aer_support flag to indicate AER is not supported
- * by the device; otherwise, if the device AER capability is already
- * disabled from supporting AER, then do nothing.
+ * PCIe error reporting is enabled by the PCI core, so drivers don't need
+ * to do anything. Retain this interface for backwards compatibility,
+ * but do nothing.
*
* Returns:
- * length of the buf on success if val is in range the intended mode
- * is supported.
- * -EINVAL if val out of range or intended mode is not supported.
+ * length of the buf on success
+ * -EINVAL if val out of range
**/
static ssize_t
lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct Scsi_Host *shost = class_to_shost(dev);
- struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
- int val = 0, rc = -EINVAL;
+ int val = 0;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
- switch (val) {
- case 0:
- if (phba->hba_flag & HBA_AER_ENABLED) {
- rc = pci_disable_pcie_error_reporting(phba->pcidev);
- if (!rc) {
- spin_lock_irq(&phba->hbalock);
- phba->hba_flag &= ~HBA_AER_ENABLED;
- spin_unlock_irq(&phba->hbalock);
- phba->cfg_aer_support = 0;
- rc = strlen(buf);
- } else
- rc = -EPERM;
- } else {
- phba->cfg_aer_support = 0;
- rc = strlen(buf);
- }
- break;
- case 1:
- if (!(phba->hba_flag & HBA_AER_ENABLED)) {
- rc = pci_enable_pcie_error_reporting(phba->pcidev);
- if (!rc) {
- spin_lock_irq(&phba->hbalock);
- phba->hba_flag |= HBA_AER_ENABLED;
- spin_unlock_irq(&phba->hbalock);
- phba->cfg_aer_support = 1;
- rc = strlen(buf);
- } else
- rc = -EPERM;
- } else {
- phba->cfg_aer_support = 1;
- rc = strlen(buf);
- }
- break;
- default:
- rc = -EINVAL;
- break;
- }
- return rc;
+ dev_info_once(dev, "PCIe error reporting automatically enabled by the PCI core; sysfs write ignored\n");
+ return strlen(buf);
}
static DEVICE_ATTR_RW(lpfc_aer_support);
@@ -4464,16 +4424,16 @@ static DEVICE_ATTR_RW(lpfc_aer_support);
* @count: unused variable.
*
* Description:
- * If the @buf contains 1 and the device currently has the AER support
- * enabled, then invokes the kernel AER helper routine
+ * If the @buf contains 1, invokes the kernel AER helper routine
* pci_aer_clear_nonfatal_status() to clean up the uncorrectable
* error status register.
*
* Notes:
*
* Returns:
- * -EINVAL if the buf does not contain the 1 or the device is not currently
- * enabled with the AER support.
+ * -EINVAL if the buf does not contain 1
+ * -EPERM if the OS cannot clear AER error status, i.e., when platform
+ * firmware owns the AER Capability
**/
static ssize_t
lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
@@ -4491,8 +4451,7 @@ lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
if (val != 1)
return -EINVAL;
- if (phba->hba_flag & HBA_AER_ENABLED)
- rc = pci_aer_clear_nonfatal_status(phba->pcidev);
+ rc = pci_aer_clear_nonfatal_status(phba->pcidev);
if (rc == 0)
return strlen(buf);
@@ -7277,7 +7236,6 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
- lpfc_aer_support_init(phba, lpfc_aer_support);
lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);
lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade);
lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 61958a24a43d..d3d4477dd472 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -32,7 +32,6 @@
#include <linux/spinlock.h>
#include <linux/sched/clock.h>
#include <linux/ctype.h>
-#include <linux/aer.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/miscdevice.h>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index c5b69f313af3..b2294e638e29 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -34,7 +34,6 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
-#include <linux/aer.h>
#include <linux/crash_dump.h>
#ifdef CONFIG_X86
#include <asm/set_memory.h>
@@ -5204,13 +5203,9 @@ lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
volatile struct MAILBOX_word0 mb;
struct lpfc_sli *psli;
void __iomem *to_slim;
- uint32_t hba_aer_enabled;
spin_lock_irq(&phba->hbalock);
- /* Take PCIe device Advanced Error Reporting (AER) state */
- hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
-
psli = &phba->sli;
/* Restart HBA */
@@ -5251,10 +5246,6 @@ lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
/* Give the INITFF and Post time to settle. */
mdelay(100);
- /* Reset HBA AER if it was enabled, note hba_flag was reset above */
- if (hba_aer_enabled)
- pci_disable_pcie_error_reporting(phba->pcidev);
-
lpfc_hba_down_post(phba);
return 0;
@@ -5273,7 +5264,6 @@ static int
lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- uint32_t hba_aer_enabled;
int rc;
/* Restart HBA */
@@ -5281,9 +5271,6 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
"0296 Restart HBA Data: x%x x%x\n",
phba->pport->port_state, psli->sli_flag);
- /* Take PCIe device Advanced Error Reporting (AER) state */
- hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
-
rc = lpfc_sli4_brdreset(phba);
if (rc) {
phba->link_state = LPFC_HBA_ERROR;
@@ -5301,10 +5288,6 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
psli->stats_start = ktime_get_seconds();
- /* Reset HBA AER if it was enabled, note hba_flag was reset above */
- if (hba_aer_enabled)
- pci_disable_pcie_error_reporting(phba->pcidev);
-
hba_down_queue:
lpfc_hba_down_post(phba);
lpfc_sli4_queue_destroy(phba);
@@ -5725,25 +5708,6 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
}
phba->fcp_embed_io = 0; /* SLI4 FC support only */
- /* Enable PCIe device Advanced Error Reporting (AER) if configured */
- if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
- rc = pci_enable_pcie_error_reporting(phba->pcidev);
- if (!rc) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2709 This device supports "
- "Advanced Error Reporting (AER)\n");
- spin_lock_irq(&phba->hbalock);
- phba->hba_flag |= HBA_AER_ENABLED;
- spin_unlock_irq(&phba->hbalock);
- } else {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2708 This device does not support "
- "Advanced Error Reporting (AER): %d\n",
- rc);
- phba->cfg_aer_support = 0;
- }
- }
-
if (phba->sli_rev == 3) {
phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE;
phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE;
@@ -9053,25 +9017,6 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
mod_timer(&phba->eratt_poll,
jiffies + msecs_to_jiffies(1000 * phba->eratt_poll_interval));
- /* Enable PCIe device Advanced Error Reporting (AER) if configured */
- if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
- rc = pci_enable_pcie_error_reporting(phba->pcidev);
- if (!rc) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2829 This device supports "
- "Advanced Error Reporting (AER)\n");
- spin_lock_irq(&phba->hbalock);
- phba->hba_flag |= HBA_AER_ENABLED;
- spin_unlock_irq(&phba->hbalock);
- } else {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2830 This device does not support "
- "Advanced Error Reporting (AER)\n");
- phba->cfg_aer_support = 0;
- }
- rc = 0;
- }
-
/*
* The port is ready, set the host's link state to LINK_DOWN
* in preparation for link interrupts.
--
2.25.1