[PATCH 1/3] arm64: dts: qcom: sm8550: replace 0x0 to 0
From: Neil Armstrong
Date: Wed Mar 08 2023 - 03:33:58 EST
Unify the sm8550.dtsi style by replacing the 0x0 to 0 as it was
required in the initial file submission.
Fixes: 377972ac743f ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes")
Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Fixes: 35cf1aaab169 ("arm64: dts: qcom: sm8550: Add UFS host controller and phy nodes")
Fixes: d0c061e366ed ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Fixes: 7d1158c984d3 ("arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes")
Fixes: 7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Fixes: 6de7f9c34358 ("arm64: dts: qcom: sm8550: add GPR and LPASS pin controller")
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 60 ++++++++++++++++++------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ff4d342c0725..fe8b92954550 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -547,7 +547,7 @@ adspslpi_mem: adspslpi-region@9ea00000 {
rmtfs_mem: rmtfs-region@d4a80000 {
compatible = "qcom,rmtfs-mem";
- reg = <0x0 0xd4a80000 0x0 0x280000>;
+ reg = <0 0xd4a80000 0 0x280000>;
no-map;
qcom,client-id = <1>;
@@ -1078,7 +1078,7 @@ spi15: spi@89c000 {
i2c_master_hub_0: geniqup@9c0000 {
compatible = "qcom,geni-se-i2c-master-hub";
- reg = <0x0 0x009c0000 0x0 0x2000>;
+ reg = <0 0x009c0000 0 0x2000>;
clock-names = "s-ahb";
clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
#address-cells = <2>;
@@ -1088,7 +1088,7 @@ i2c_master_hub_0: geniqup@9c0000 {
i2c_hub_0: i2c@980000 {
compatible = "qcom,geni-i2c-master-hub";
- reg = <0x0 0x00980000 0x0 0x4000>;
+ reg = <0 0x00980000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1105,7 +1105,7 @@ i2c_hub_0: i2c@980000 {
i2c_hub_1: i2c@984000 {
compatible = "qcom,geni-i2c-master-hub";
- reg = <0x0 0x00984000 0x0 0x4000>;
+ reg = <0 0x00984000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1122,7 +1122,7 @@ i2c_hub_1: i2c@984000 {
i2c_hub_2: i2c@988000 {
compatible = "qcom,geni-i2c-master-hub";
- reg = <0x0 0x00988000 0x0 0x4000>;
+ reg = <0 0x00988000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1139,7 +1139,7 @@ i2c_hub_2: i2c@988000 {
i2c_hub_3: i2c@98c000 {
compatible = "qcom,geni-i2c-master-hub";
- reg = <0x0 0x0098c000 0x0 0x4000>;
+ reg = <0 0x0098c000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1156,7 +1156,7 @@ i2c_hub_3: i2c@98c000 {
i2c_hub_4: i2c@990000 {
compatible = "qcom,geni-i2c-master-hub";
- reg = <0x0 0x00990000 0x0 0x4000>;
+ reg = <0 0x00990000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1653,8 +1653,8 @@ pcie0: pci@1c00000 {
reg-names = "parf", "dbi", "elbi", "atu", "config";
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
- <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+ ranges = <0x01000000 0 0x60200000 0 0x60200000 0 0x100000>,
+ <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
bus-range = <0x00 0xff>;
dma-coherent;
@@ -1693,7 +1693,7 @@ pcie0: pci@1c00000 {
interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>;
iommus = <&apps_smmu 0x1400 0x7f>;
- iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+ iommu-map = <0 &apps_smmu 0x1400 0x1>,
<0x100 &apps_smmu 0x1401 0x1>;
resets = <&gcc GCC_PCIE_0_BCR>;
@@ -1744,16 +1744,16 @@ pcie0_phy: phy@1c06000 {
pcie1: pci@1c08000 {
device_type = "pci";
compatible = "qcom,pcie-sm8550";
- reg = <0x0 0x01c08000 0x0 0x3000>,
- <0x0 0x40000000 0x0 0xf1d>,
- <0x0 0x40000f20 0x0 0xa8>,
- <0x0 0x40001000 0x0 0x1000>,
- <0x0 0x40100000 0x0 0x100000>;
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
reg-names = "parf", "dbi", "elbi", "atu", "config";
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
- <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
+ ranges = <0x01000000 0 0x40200000 0 0x40200000 0 0x100000>,
+ <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
bus-range = <0x00 0xff>;
dma-coherent;
@@ -1797,7 +1797,7 @@ pcie1: pci@1c08000 {
interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>;
iommus = <&apps_smmu 0x1480 0x7f>;
- iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
+ iommu-map = <0 &apps_smmu 0x1480 0x1>,
<0x100 &apps_smmu 0x1481 0x1>;
resets = <&gcc GCC_PCIE_1_BCR>,
@@ -1821,7 +1821,7 @@ pcie1: pci@1c08000 {
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
- reg = <0x0 0x01c0e000 0x0 0x2000>;
+ reg = <0 0x01c0e000 0 0x2000>;
clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1851,7 +1851,7 @@ pcie1_phy: phy@1c0e000 {
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.0";
- reg = <0x0 0x01dc4000 0x0 0x28000>;
+ reg = <0 0x01dc4000 0 0x28000>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
@@ -1862,7 +1862,7 @@ cryptobam: dma-controller@1dc4000 {
crypto: crypto@1de0000 {
compatible = "qcom,sm8550-qce";
- reg = <0x0 0x01dfa000 0x0 0x6000>;
+ reg = <0 0x01dfa000 0 0x6000>;
dmas = <&cryptobam 4>, <&cryptobam 5>;
dma-names = "rx", "tx";
iommus = <&apps_smmu 0x480 0x0>,
@@ -1873,7 +1873,7 @@ crypto: crypto@1de0000 {
ufs_mem_phy: phy@1d80000 {
compatible = "qcom,sm8550-qmp-ufs-phy";
- reg = <0x0 0x01d80000 0x0 0x2000>;
+ reg = <0 0x01d80000 0 0x2000>;
clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
clock-names = "ref", "ref_aux";
@@ -1892,7 +1892,7 @@ ufs_mem_phy: phy@1d80000 {
ufs_mem_hc: ufs@1d84000 {
compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
- reg = <0x0 0x01d84000 0x0 0x3000>;
+ reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
@@ -1954,7 +1954,7 @@ tcsr: clock-controller@1fc0000 {
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sm8550-mpss-pas";
- reg = <0x0 0x04080000 0x0 0x4040>;
+ reg = <0 0x04080000 0 0x4040>;
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2383,7 +2383,7 @@ dispcc: clock-controller@af00000 {
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8550-snps-eusb2-phy";
- reg = <0x0 0x088e3000 0x0 0x154>;
+ reg = <0 0x088e3000 0 0x154>;
#phy-cells = <0>;
clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
@@ -2396,7 +2396,7 @@ usb_1_hsphy: phy@88e3000 {
usb_dp_qmpphy: phy@88e8000 {
compatible = "qcom,sm8550-qmp-usb3-dp-phy";
- reg = <0x0 0x088e8000 0x0 0x3000>;
+ reg = <0 0x088e8000 0 0x3000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
@@ -2418,7 +2418,7 @@ usb_dp_qmpphy: phy@88e8000 {
usb_1: usb@a6f8800 {
compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
- reg = <0x0 0x0a6f8800 0x0 0x400>;
+ reg = <0 0x0a6f8800 0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -2458,7 +2458,7 @@ usb_1: usb@a6f8800 {
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
- reg = <0x0 0x0a600000 0x0 0xcd00>;
+ reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x40 0x0>;
snps,dis_u2_susphy_quirk;
@@ -3444,7 +3444,7 @@ system-cache-controller@25000000 {
remoteproc_adsp: remoteproc@30000000 {
compatible = "qcom,sm8550-adsp-pas";
- reg = <0x0 0x30000000 0x0 0x100>;
+ reg = <0 0x30000000 0 0x100>;
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3576,7 +3576,7 @@ nsp_noc: interconnect@320c0000 {
remoteproc_cdsp: remoteproc@32300000 {
compatible = "qcom,sm8550-cdsp-pas";
- reg = <0x0 0x32300000 0x0 0x1400000>;
+ reg = <0 0x32300000 0 0x1400000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
--
2.34.1