Re: [PATCH v1 1/4] dt-bindings: power: supply: maxim,max17040: update properties
From: Svyatoslav Ryhel
Date: Wed Mar 08 2023 - 04:16:00 EST
ср, 8 бер. 2023 р. о 11:04 Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> пише:
>
> On 08/03/2023 09:44, Svyatoslav Ryhel wrote:
> > Add simple cell, status, health and temperature properties.
> >
> > Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
> > ---
> > .../bindings/power/supply/maxim,max17040.yaml | 37 +++++++++++++++++++
> > 1 file changed, 37 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
> > index 3a529326ecbd..6f1c25b4729f 100644
> > --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
> > +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
> > @@ -55,6 +55,20 @@ properties:
> > interrupts:
> > maxItems: 1
> >
> > + monitored-battery:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: phandle to the battery node being monitored
> > +
> > + power-supplies: true
>
> This should be rather specific input name, e.g. vdd-supply.
>
it is not vdd it is actual charger device
> > +
> > + io-channels:
> > + items:
> > + - description: battery temperature
>
>
>
> max17040 does not have ADC temperature input... so is it system
> configuration?
>
yes, I own a device (LG Optimus Vu P895) which uses max17043
coupled with ADC thermal sensor
> > +
> > + io-channel-names:
> > + items:
> > + - const: temp
>
> Drop the names property, not needed for one item.
>
Alright, but driver patch expects temp name. I will look if this
is adjustable.
> > +
> > wakeup-source:
> > type: boolean
> > description: |
> > @@ -95,3 +109,26 @@ examples:
> > wakeup-source;
> > };
> > };
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + i2c0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + fuel-gauge@36 {
> > + compatible = "maxim,max17043";
> > + reg = <0x36>;
> > +
> > + interrupt-parent = <&gpio>;
> > + interrupts = <144 IRQ_TYPE_EDGE_FALLING>;
> > +
> > + monitored-battery = <&battery>;
> > + power-supplies = <&charger>;
>
> But here you suggests something else than VDD... The hardware does not
> take charger as input. It takes power supply - vdd.
>
Power system allows passing properties from other power devices.
In this case battery health and status are passed from charger.
> > +
> > + io-channels = <&adc 8>;
>
> Just add these to existing example.
>
Not sure if it is a good idea, as you wish.
> > + io-channel-names = "temp";
> > +
> > + maxim,alert-low-soc-level = <10>;
> > + wakeup-source;
> > + };
> > + };
>
> Best regards,
> Krzysztof
>
Best regards,
Svyatoslav R.