Re: [PATCH v2 1/1] remoteproc: qcom: Add remoteproc tracing
From: Gokul Krishna Krishnakumar
Date: Wed Mar 08 2023 - 17:49:36 EST
On 3/6/2023 4:17 AM, Mukesh Ojha wrote:
On 3/3/2023 9:24 AM, Gokul krishna Krishnakumar wrote:
This change attempts to add traces for start, stop, crash
subsystem/subdevice event these will serve as standard checkpoints in
code and could help in debugging the failures in subdevice/subsystem
prepare, start, stop and unprepare functions. This will also breakdown
the time taken for each step in remoteproc bootup/shutdown process.
Change-Id: I202814452192ca0733f134daf7c99201881e2c9c
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@xxxxxxxxxxx>
---
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/qcom_common.c | 37 ++++++++
drivers/remoteproc/qcom_q6v5.c | 9 ++
drivers/remoteproc/qcom_tracepoints.c | 12 +++
drivers/remoteproc/remoteproc_core.c | 8 ++
include/trace/events/rproc_qcom.h | 128 ++++++++++++++++++++++++++
6 files changed, 195 insertions(+)
create mode 100644 drivers/remoteproc/qcom_tracepoints.c
create mode 100644 include/trace/events/rproc_qcom.h
I think, it is better to split this where first patch will introduce the
trace event and in the later you can use at respective places.
Done.
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 91314a9b43ce..3399fcaba39b 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -10,6 +10,7 @@ remoteproc-y += remoteproc_debugfs.o
remoteproc-y += remoteproc_sysfs.o
remoteproc-y += remoteproc_virtio.o
remoteproc-y += remoteproc_elf_loader.o
+remoteproc-y += qcom_tracepoints.o
obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o
diff --git a/drivers/remoteproc/qcom_common.c
b/drivers/remoteproc/qcom_common.c
index 020349f8979d..09b79f39ccd6 100644
--- a/drivers/remoteproc/qcom_common.c
+++ b/drivers/remoteproc/qcom_common.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem.h>
+#include <trace/events/rproc_qcom.h>
#include "remoteproc_internal.h"
#include "qcom_common.h"
@@ -186,6 +187,10 @@ static int glink_subdev_start(struct rproc_subdev
*subdev)
glink->edge = qcom_glink_smem_register(glink->dev, glink->node);
+ trace_rproc_subdev_event(dev_name(glink->dev->parent),
+ "glink", "start",
+ PTR_ERR_OR_ZERO(glink->edge));
+
return PTR_ERR_OR_ZERO(glink->edge);
}
@@ -194,6 +199,11 @@ static void glink_subdev_stop(struct rproc_subdev
*subdev, bool crashed)
struct qcom_rproc_glink *glink = to_glink_subdev(subdev);
qcom_glink_smem_unregister(glink->edge);
+
+ trace_rproc_subdev_event(dev_name(glink->dev->parent),
+ "glink", "stop",
+ PTR_ERR_OR_ZERO(glink->edge));
+
glink->edge = NULL;
}
@@ -201,6 +211,10 @@ static void glink_subdev_unprepare(struct
rproc_subdev *subdev)
{
struct qcom_rproc_glink *glink = to_glink_subdev(subdev);
+ trace_rproc_subdev_event(dev_name(glink->dev->parent),
+ "glink", "unprepare",
+ PTR_ERR_OR_ZERO(glink->edge));
+
qcom_glink_ssr_notify(glink->ssr_name);
}
@@ -295,6 +309,10 @@ static int smd_subdev_start(struct rproc_subdev
*subdev)
{
struct qcom_rproc_subdev *smd = to_smd_subdev(subdev);
+ trace_rproc_subdev_event(dev_name(smd->dev->parent),
+ "smd", "start",
+ PTR_ERR_OR_ZERO(smd->edge));
+
smd->edge = qcom_smd_register_edge(smd->dev, smd->node);
return PTR_ERR_OR_ZERO(smd->edge);
@@ -304,6 +322,10 @@ static void smd_subdev_stop(struct rproc_subdev
*subdev, bool crashed)
{
struct qcom_rproc_subdev *smd = to_smd_subdev(subdev);
+ trace_rproc_subdev_event(dev_name(smd->dev->parent),
+ "smd", "stop",
+ PTR_ERR_OR_ZERO(smd->edge));
+
qcom_smd_unregister_edge(smd->edge);
smd->edge = NULL;
}
@@ -420,6 +442,10 @@ static int ssr_notify_prepare(struct rproc_subdev
*subdev)
.crashed = false,
};
+ trace_rproc_subdev_event(ssr->info->name,
+ "ssr", "QCOM_SSR_BEFORE_POWERUP",
+ data.crashed);
+
srcu_notifier_call_chain(&ssr->info->notifier_list,
QCOM_SSR_BEFORE_POWERUP, &data);
return 0;
@@ -432,6 +458,9 @@ static int ssr_notify_start(struct rproc_subdev
*subdev)
.name = ssr->info->name,
.crashed = false,
};
+ trace_rproc_subdev_event(ssr->info->name,
+ "ssr", "QCOM_SSR_AFTER_POWERUP",
+ data.crashed);
srcu_notifier_call_chain(&ssr->info->notifier_list,
QCOM_SSR_AFTER_POWERUP, &data);
@@ -446,6 +475,10 @@ static void ssr_notify_stop(struct rproc_subdev
*subdev, bool crashed)
.crashed = crashed,
};
+ trace_rproc_subdev_event(ssr->info->name,
+ "ssr", "QCOM_SSR_BEFORE_SHUTDOWN",
+ data.crashed);
+
srcu_notifier_call_chain(&ssr->info->notifier_list,
QCOM_SSR_BEFORE_SHUTDOWN, &data);
}
@@ -458,6 +491,10 @@ static void ssr_notify_unprepare(struct
rproc_subdev *subdev)
.crashed = false,
};
+ trace_rproc_subdev_event(ssr->info->name,
+ "ssr", "QCOM_SSR_AFTER_SHUTDOWN",
+ data.crashed);
+
srcu_notifier_call_chain(&ssr->info->notifier_list,
QCOM_SSR_AFTER_SHUTDOWN, &data);
}
diff --git a/drivers/remoteproc/qcom_q6v5.c
b/drivers/remoteproc/qcom_q6v5.c
index 497acfb33f8f..aff91de3cea0 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -15,6 +15,7 @@
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include <linux/remoteproc.h>
+#include <trace/events/rproc_qcom.h>
#include "qcom_common.h"
#include "qcom_q6v5.h"
@@ -113,6 +114,7 @@ static irqreturn_t q6v5_wdog_interrupt(int irq,
void *data)
dev_err(q6v5->dev, "watchdog without message\n");
q6v5->running = false;
+ trace_rproc_interrupt_event(q6v5->rproc, "q6v5_wdog", msg);
rproc_report_crash(q6v5->rproc, RPROC_WATCHDOG);
return IRQ_HANDLED;
@@ -134,6 +136,7 @@ static irqreturn_t q6v5_fatal_interrupt(int irq,
void *data)
dev_err(q6v5->dev, "fatal error without message\n");
q6v5->running = false;
+ trace_rproc_interrupt_event(q6v5->rproc, "fatal", msg);
rproc_report_crash(q6v5->rproc, RPROC_FATAL_ERROR);
return IRQ_HANDLED;
@@ -165,6 +168,8 @@ int qcom_q6v5_wait_for_start(struct qcom_q6v5
*q6v5, int timeout)
if (!ret)
disable_irq(q6v5->handover_irq);
+ trace_rproc_interrupt_event(q6v5->rproc, "Ready", !ret?
"-ETIMEDOUT":"done");
+
return !ret ? -ETIMEDOUT : 0;
}
EXPORT_SYMBOL_GPL(qcom_q6v5_wait_for_start);
@@ -180,6 +185,8 @@ static irqreturn_t q6v5_handover_interrupt(int
irq, void *data)
q6v5->handover_issued = true;
+ trace_rproc_interrupt_event(q6v5->rproc, "handover", "Proxy votes
removed");
+
return IRQ_HANDLED;
}
@@ -216,6 +223,8 @@ int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5,
struct qcom_sysmon *sysmon)
qcom_smem_state_update_bits(q6v5->state, BIT(q6v5->stop_bit), 0);
+ trace_rproc_interrupt_event(q6v5->rproc, "Stop", ret?
"done":"-EETIMEDOUT");
+
return ret == 0 ? -ETIMEDOUT : 0;
}
EXPORT_SYMBOL_GPL(qcom_q6v5_request_stop);
diff --git a/drivers/remoteproc/qcom_tracepoints.c
b/drivers/remoteproc/qcom_tracepoints.c
new file mode 100644
index 000000000000..1b587ef54aa7
--- /dev/null
+++ b/drivers/remoteproc/qcom_tracepoints.c'
is it qcom specific ? No, i guess, as you have put traces in generic
path as well.
Yes you are right the traces are generic to remoteproc events.
-Mukesh
Thanks for the review,
Gokul
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
reserved.
+ */
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/rproc_qcom.h>
+EXPORT_TRACEPOINT_SYMBOL(rproc_load_event);
+EXPORT_TRACEPOINT_SYMBOL(rproc_start_event);
+EXPORT_TRACEPOINT_SYMBOL(rproc_stop_event);
+EXPORT_TRACEPOINT_SYMBOL(rproc_interrupt_event);
+EXPORT_TRACEPOINT_SYMBOL(rproc_subdev_event);
diff --git a/drivers/remoteproc/remoteproc_core.c
b/drivers/remoteproc/remoteproc_core.c
index 1cd4815a6dd1..6def868f0a98 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -38,6 +38,7 @@
#include <linux/virtio_ring.h>
#include <asm/byteorder.h>
#include <linux/platform_device.h>
+#include <trace/events/rproc_qcom.h>
#include "remoteproc_internal.h"
@@ -1270,6 +1271,7 @@ static int rproc_start(struct rproc *rproc,
const struct firmware *fw)
/* load the ELF segments to memory */
ret = rproc_load_segments(rproc, fw);
+ trace_rproc_load_event(rproc, ret);
if (ret) {
dev_err(dev, "Failed to load program segments: %d\n", ret);
return ret;
@@ -1305,6 +1307,7 @@ static int rproc_start(struct rproc *rproc,
const struct firmware *fw)
/* Start any subdevices for the remote processor */
ret = rproc_start_subdevices(rproc);
+
if (ret) {
dev_err(dev, "failed to probe subdevices for %s: %d\n",
rproc->name, ret);
@@ -1729,6 +1732,8 @@ static int rproc_stop(struct rproc *rproc, bool
crashed)
return ret;
}
+ trace_rproc_stop_event(rproc, crashed ? "crash stop" : "stop");
+
rproc_unprepare_subdevices(rproc);
rproc->state = RPROC_OFFLINE;
@@ -1939,6 +1944,8 @@ int rproc_boot(struct rproc *rproc)
dev_info(dev, "attaching to %s\n", rproc->name);
ret = rproc_attach(rproc);
+ trace_rproc_start_event(rproc, ret);
+
} else {
dev_info(dev, "powering up %s\n", rproc->name);
@@ -1950,6 +1957,7 @@ int rproc_boot(struct rproc *rproc)
}
ret = rproc_fw_boot(rproc, firmware_p);
+ trace_rproc_start_event(rproc, ret);
release_firmware(firmware_p);
}
diff --git a/include/trace/events/rproc_qcom.h
b/include/trace/events/rproc_qcom.h
new file mode 100644
index 000000000000..66b10cb17965
--- /dev/null
+++ b/include/trace/events/rproc_qcom.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
reserved.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM rproc_qcom
+
+#if !defined(_TRACE_RPROC_QCOM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_RPROC_QCOM_H
+#include <linux/tracepoint.h>
+#include <linux/remoteproc.h>
+
+/*
+ * Tracepoints for remoteproc and subdevice events
+ */
+TRACE_EVENT(rproc_load_event,
+
+ TP_PROTO(struct rproc *rproc, int ret),
+
+ TP_ARGS(rproc, ret),
+
+ TP_STRUCT__entry(
+ __string(name, rproc->name)
+ __string(firmware, rproc->firmware)
+ __field(int,ret)
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, rproc->name);
+ __assign_str(firmware, rproc->firmware);
+ __entry->ret = ret;
+ ),
+
+ TP_printk("%s loading firmware %s returned %d",
+ __get_str(name), __get_str(firmware),
+ __entry->ret)
+);
+
+TRACE_EVENT(rproc_start_event,
+
+ TP_PROTO(struct rproc *rproc, int ret),
+
+ TP_ARGS(rproc, ret),
+
+ TP_STRUCT__entry(
+ __string(name, rproc->name)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, rproc->name);
+ __entry->ret = ret;
+ ),
+
+ TP_printk("%s %d", __get_str(name), __entry->ret)
+);
+
+TRACE_EVENT(rproc_stop_event,
+
+ TP_PROTO(struct rproc *rproc, char* crash_msg),
+
+ TP_ARGS(rproc, crash_msg),
+
+ TP_STRUCT__entry(
+ __string(name, rproc->name)
+ __string(crash_msg, crash_msg)
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, rproc->name);
+ __assign_str(crash_msg, crash_msg)
+ ),
+
+ TP_printk("%s %s", __get_str(name), __get_str(crash_msg))
+);
+
+TRACE_EVENT(rproc_interrupt_event,
+
+ TP_PROTO(struct rproc *rproc, const char* event,
+ const char* msg),
+
+ TP_ARGS(rproc, event, msg),
+
+ TP_STRUCT__entry(
+ __string(name, rproc->name)
+ __string(event, event)
+ __string(msg, msg)
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, rproc->name);
+ __assign_str(event, event);
+ __assign_str(msg, msg);
+ ),
+
+ TP_printk("%s %s returned %s", __get_str(name),
+ __get_str(event), __get_str(msg))
+);
+
+TRACE_EVENT(rproc_subdev_event,
+
+ TP_PROTO(const char* rproc, const char* subdev,
+ const char* event, int ret),
+
+ TP_ARGS(rproc, subdev, event, ret),
+
+ TP_STRUCT__entry(
+ __string(rproc, rproc)
+ __string(subdev, subdev)
+ __string(event, event)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ __assign_str(rproc, rproc);
+ __assign_str(subdev, subdev);
+ __assign_str(event, event);
+ __entry->ret = ret;
+ ),
+
+ TP_printk("%s %s %s %d", __get_str(rproc), __get_str(subdev),
+ __get_str(event), __entry->ret)
+);
+#endif /* _TRACE_RPROC_QCOM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>