Re: [RFC PATCH v1 4/4] ufs: mcq: Added ufshcd_mcq_abort()
From: Stanley Chu
Date: Thu Mar 09 2023 - 01:21:33 EST
Hi Bao,
On Thu, Mar 9, 2023 at 1:31 PM Bao D. Nguyen <quic_nguyenb@xxxxxxxxxxx> wrote:
>
> On 3/8/2023 7:10 PM, Stanley Chu wrote:
> > Hi Bao,
> >
> > On Wed, Mar 8, 2023 at 12:10 PM Bao D. Nguyen <quic_nguyenb@xxxxxxxxxxx> wrote:
> >> Add ufshcd_mcq_abort() to support ufs abort in mcq mode.
> >>
> >> Signed-off-by: Bao D. Nguyen <quic_nguyenb@xxxxxxxxxxx>
> >> ---
> >> drivers/ufs/core/ufs-mcq.c | 76 ++++++++++++++++++++++++++++++++++++++++++
> >> drivers/ufs/core/ufshcd-priv.h | 5 ++-
> >> drivers/ufs/core/ufshcd.c | 11 ++++--
> >> 3 files changed, 88 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> >> index e27d8eb..6c65cd5 100644
> >> --- a/drivers/ufs/core/ufs-mcq.c
> >> +++ b/drivers/ufs/core/ufs-mcq.c
> >> @@ -646,3 +646,79 @@ static bool ufshcd_mcq_cqe_search(struct ufs_hba *hba,
> >> spin_unlock(&hwq->cq_lock);
> >> return ret;
> >> }
> >> +
> >> +/**
> >> + * ufshcd_mcq_abort - Abort the command in MCQ.
> >> + * @cmd - The command to be aborted.
> >> + *
> >> + * Returns SUCCESS or FAILED error codes
> >> + */
> >> +int ufshcd_mcq_abort(struct scsi_cmnd *cmd)
> >> +{
> >> + struct Scsi_Host *host = cmd->device->host;
> >> + struct ufs_hba *hba = shost_priv(host);
> >> + int tag = scsi_cmd_to_rq(cmd)->tag;
> >> + struct ufshcd_lrb *lrbp = &hba->lrb[tag];
> >> + struct ufs_hw_queue *hwq;
> >> + int err = FAILED;
> >> +
> >> + if (!lrbp->cmd) {
> >> + dev_err(hba->dev,
> >> + "%s: skip abort. cmd at tag %d already completed.\n",
> >> + __func__, tag);
> >> + goto out;
> >> + }
> >> +
> >> + /* Skip task abort in case previous aborts failed and report failure */
> >> + if (lrbp->req_abort_skip) {
> >> + dev_err(hba->dev, "%s: skip abort. tag %d failed earlier\n",
> >> + __func__, tag);
> >> + goto out;
> >> + }
> >> +
> >> + hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd));
> >> +
> >> + if (ufshcd_mcq_sqe_search(hba, hwq, tag)) {
> >> + /*
> >> + * Failure. The command should not be "stuck" in SQ for
> >> + * a long time which resulted in command being aborted.
> >> + */
> >> + dev_err(hba->dev, "%s: cmd found in sq. hwq=%d, tag=%d\n",
> >> + __func__, hwq->id, tag);
> >> + /* Set the Command Type to 0xF per the spec */
> >> + ufshcd_mcq_nullify_cmd(hba, hwq);
> >> + goto out;
> >> + }
> >> +
> >> + if (ufshcd_mcq_cqe_search(hba, hwq, tag)) {
> >> + dev_err(hba->dev, "%s: cmd found in cq. hwq=%d, tag=%d\n",
> >> + __func__, hwq->id, tag);
> >> + /*
> >> + * The command should not be 'stuck' in the CQ for such a long time.
> >> + * Is interrupt missing? Process the CQEs here. If the interrupt is
> >> + * invoked at a later time, the CQ will be empty because the CQEs
> >> + * are already processed here.
> >> + */
> >> + ufshcd_mcq_poll_cqe_lock(hba, hwq);
> >> + err = SUCCESS;
> >> + goto out;
> >> + }
> >> +
> >> + /*
> >> + * The command is not in the Submission Queue, and it is not
> >> + * in the Completion Queue either. Query the device to see if
> >> + * the command is being processed in the device.
> >> + */
> >> + if (ufshcd_try_to_abort_task(hba, tag)) {
> >> + dev_err(hba->dev, "%s: device abort failed %d\n", __func__, err);
> >> + lrbp->req_abort_skip = true;
> >> + goto out;
> >> + }
> >> +
> >> + err = SUCCESS;
> >> + if (lrbp->cmd)
> >> + ufshcd_release_scsi_cmd(hba, lrbp);
> >> +
> >> +out:
> >> + return err;
> >> +}
> >> diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
> >> index 0527926..d883c03 100644
> >> --- a/drivers/ufs/core/ufshcd-priv.h
> >> +++ b/drivers/ufs/core/ufshcd-priv.h
> >> @@ -77,7 +77,10 @@ unsigned long ufshcd_mcq_poll_cqe_lock(struct ufs_hba *hba,
> >> struct ufs_hw_queue *hwq);
> >>
> >> int ufshcd_mcq_sq_cleanup(struct ufs_hba *hba, int task_tag, int *result);
> >> -
> >> +int ufshcd_mcq_abort(struct scsi_cmnd *cmd);
> >> +int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag);
> >> +void ufshcd_release_scsi_cmd(struct ufs_hba *hba,
> >> + struct ufshcd_lrb *lrbp);
> >> #define UFSHCD_MCQ_IO_QUEUE_OFFSET 1
> >> #define SD_ASCII_STD true
> >> #define SD_RAW false
> >> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> >> index 408c16c..e06399e 100644
> >> --- a/drivers/ufs/core/ufshcd.c
> >> +++ b/drivers/ufs/core/ufshcd.c
> >> @@ -302,7 +302,6 @@ static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on);
> >> static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on);
> >> static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
> >> struct ufs_vreg *vreg);
> >> -static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag);
> >> static void ufshcd_wb_toggle_buf_flush_during_h8(struct ufs_hba *hba,
> >> bool enable);
> >> static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
> >> @@ -5414,7 +5413,7 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
> >> }
> >>
> >> /* Release the resources allocated for processing a SCSI command. */
> >> -static void ufshcd_release_scsi_cmd(struct ufs_hba *hba,
> >> +void ufshcd_release_scsi_cmd(struct ufs_hba *hba,
> >> struct ufshcd_lrb *lrbp)
> >> {
> >> struct scsi_cmnd *cmd = lrbp->cmd;
> >> @@ -7340,7 +7339,7 @@ static void ufshcd_set_req_abort_skip(struct ufs_hba *hba, unsigned long bitmap)
> >> *
> >> * Returns zero on success, non-zero on failure
> >> */
> >> -static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag)
> >> +int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag)
> >> {
> >> struct ufshcd_lrb *lrbp = &hba->lrb[tag];
> >> int err = 0;
> >> @@ -7500,6 +7499,12 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
> >> goto release;
> >> }
> >>
> >> + if (is_mcq_enabled(hba)) {
> >> + /* MCQ mode. Branch off to handle abort for mcq mode */
> >> + err = ufshcd_mcq_abort(cmd);
> >> + goto release;
> >> + }
> >> +
> >> /* Skip task abort in case previous aborts failed and report failure */
> >> if (lrbp->req_abort_skip) {
> >> dev_err(hba->dev, "%s: skipping abort\n", __func__);
> >> --
> >> 2.7.4
> >>
> > It seems that ufshcd_abort_all() also needs an error handling flow for MCQ.
>
> Hi Stanley, thank you for the reviews.
>
> I am not able to find the function ufshcd_abort_all() in the drivers/ufs
> directory. Can you please clarify where this function is located? Thanks.
The function ufshcd_abort_all() was introduced in the following link:
https://android.googlesource.com/kernel/common/+/b817e6ffbad7a1a0a5ca5bb7d4020823c3f4d9d0
Can you confirm if these patches are based on the latest kernel
6.3-rc1 or the latest linux-next tree?
Thanks,
Stanley
>
> >
> > Thanks,
> > Stanley
>
>