[PATCH v2 05/17] PCI: qcom: Use lower case for hex

From: Manivannan Sadhasivam
Date: Thu Mar 09 2023 - 03:51:55 EST


To maintain uniformity, let's use lower case for representing hexadecimal
numbers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 926a531fda3a..4179ac973147 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -39,17 +39,17 @@
#define PARF_PCS_DEEMPH 0x34
#define PARF_PCS_SWING 0x38
#define PARF_PHY_CTRL 0x40
-#define PARF_PHY_REFCLK 0x4C
+#define PARF_PHY_REFCLK 0x4c
#define PARF_CONFIG_BITS 0x50
#define PARF_DBI_BASE_ADDR 0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16C /* Register offset specific to IP ver 2.3.3 */
+#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
#define PARF_MHI_CLOCK_RESET_CTRL 0x174
#define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
-#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8
-#define PARF_Q2A_FLUSH 0x1AC
-#define PARF_LTSSM 0x1B0
+#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
+#define PARF_Q2A_FLUSH 0x1ac
+#define PARF_LTSSM 0x1b0
#define PARF_SID_OFFSET 0x234
-#define PARF_BDF_TRANSLATE_CFG 0x24C
+#define PARF_BDF_TRANSLATE_CFG 0x24c
#define PARF_SLV_ADDR_SPACE_SIZE 0x358
#define PARF_DEVICE_TYPE 0x1000
#define PARF_BDF_TO_SID_TABLE_N 0x2000
@@ -60,7 +60,7 @@
/* DBI registers */
#define AXI_MSTR_RESP_COMP_CTRL0 0x818
#define AXI_MSTR_RESP_COMP_CTRL1 0x81c
-#define MISC_CONTROL_1_REG 0x8BC
+#define MISC_CONTROL_1_REG 0x8bc

/* PARF_SYS_CTRL register fields */
#define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN BIT(29)
--
2.25.1