[PATCH 3/4] pinctrl: qcom: lpass-lpi: allow glitch-free output GPIO

[Krzysztof Kozlowski]

When choosing GPIO function for pins, use the same glitch-free method as
main TLMM pinctrl-msm.c driver in msm_pinmux_set_mux().  This replicates
the commit d21f4b7ffc22 ("pinctrl: qcom: Avoid glitching lines when we
first mux to output") to LPASS pin controller with same justification.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 28 ++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index bd32556d75a5..fdb6585a9234 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -19,6 +19,8 @@
 
 #include "pinctrl-lpass-lpi.h"
 
+#define MAX_NR_GPIO		23
+#define GPIO_FUNC		0
 #define MAX_LPI_NUM_CLKS	2
 
 struct lpi_pinctrl {
@@ -30,6 +32,7 @@ struct lpi_pinctrl {
 	char __iomem *slew_base;
 	struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
 	struct mutex slew_access_lock;
+	DECLARE_BITMAP(ever_gpio, MAX_NR_GPIO);
 	const struct lpi_pinctrl_variant_data *data;
 };
 
@@ -100,6 +103,28 @@ static int lpi_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
 		return -EINVAL;
 
 	val = lpi_gpio_read(pctrl, pin, LPI_GPIO_CFG_REG);
+
+	/*
+	 * If this is the first time muxing to GPIO and the direction is
+	 * output, make sure that we're not going to be glitching the pin
+	 * by reading the current state of the pin and setting it as the
+	 * output.
+	 */
+	if (i == GPIO_FUNC && (val & LPI_GPIO_OE_MASK) &&
+	    !test_and_set_bit(group, pctrl->ever_gpio)) {
+		u32 io_val = lpi_gpio_read(pctrl, group, LPI_GPIO_VALUE_REG);
+
+		if (io_val & LPI_GPIO_VALUE_IN_MASK) {
+			if (!(io_val & LPI_GPIO_VALUE_OUT_MASK))
+				lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG,
+					       io_val | LPI_GPIO_VALUE_OUT_MASK);
+		} else {
+			if (io_val & LPI_GPIO_VALUE_OUT_MASK)
+				lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG,
+					       io_val & ~LPI_GPIO_VALUE_OUT_MASK);
+		}
+	}
+
 	u32p_replace_bits(&val, i, LPI_GPIO_FUNCTION_MASK);
 	lpi_gpio_write(pctrl, pin, LPI_GPIO_CFG_REG, val);
 
@@ -394,6 +419,9 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
 	if (!data)
 		return -EINVAL;
 
+	if (WARN_ON(data->npins > MAX_NR_GPIO))
+		return -EINVAL;
+
 	pctrl->data = data;
 	pctrl->dev = &pdev->dev;
 
-- 
2.34.1