Re: [PATCH] dt-bindings: pinctrl: k3: Introduce debounce select mux macros

[Nishanth Menon]

On 15:03-20230309, Linus Walleij wrote:
> On Wed, Mar 8, 2023 at 9:43 AM Nishanth Menon <nm@xxxxxx> wrote:
> 
> > Introduce the debounce select mux macros to allow folks to setup
> > debounce configuration for pins. Each configuration selected maps
> > to a specific timing register as documented in appropriate Technical
> > Reference Manual (example:[1]).
> >
> > [1] AM625x TRM (section 6.1.2.2): https://www.ti.com/lit/pdf/spruiv7
> > Signed-off-by: Nishanth Menon <nm@xxxxxx>
> 
> Patch applied.
> 
> Consider doing what Krzysztof recommends: move thes <dt-bindings/*.h>
> down to the arch where you're using it and have them as .dtsi files instead
> or something.

Yep, that sounds like a better idea. If you are ok to drop this
patch, then lets do the cleanup first and move the pinctrl to something like
arch/arm64/boot/dts/ti/k3-pinctrl.h

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D