[PATCH v18 0/3] Add MediaTek MT6370 PMIC support

From: ChiaEn Wu
Date: Fri Mar 10 2023 - 01:56:48 EST

This patch series add MediaTek MT6370 LED indicator and flashlight support.
The MT6370 is a highly-integrated smart power management IC, which includes
a single cell Li-Ion/Li-Polymer switching battery charger, a
USB Type-C & Power Delivery (PD) controller, dual Flash LED current
sources, a RGB LED driver, a backlight WLED driver, a display bias
driver and a general LDO for portable devices.

In this series, the following patches have been applied,
- 'dt-binding: mfd' and 'mfd driver' have been applied by Lee in v7.
https://lore.kernel.org/all/YvJdpq0MWNPQZw5c@xxxxxxxxxx/
https://lore.kernel.org/all/YvJdxEpC2cB58Bq9@xxxxxxxxxx/

- 'tcpci driver' has been applied by Greg in v8.
https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c2a8ea5997fdfeb43eda259d5533234c3cae05d7

- 'dt-binding: backlight' and 'backlight driver' have been applied
by Lee in v9.
https://lore.kernel.org/all/YxYSDSlnOELL2mPF@xxxxxxxxxx/
https://lore.kernel.org/all/YxYS7%2FdZI69lMXeh@xxxxxxxxxx/

- 'dt-binding: charger', 'charger driver' and 'linear_range.h' patch have
been applied by Sebastian in v11.
https://lore.kernel.org/all/20220920160857.6qfi66gtmgwesq7g@xxxxxxxxxxxxxxxxxxxxxx/
https://lore.kernel.org/all/20220920161218.dkkfvfomrruebahi@xxxxxxxxxxxxxxxxxxxxxx/
https://lore.kernel.org/all/20220920161238.dswtmyon462324dm@xxxxxxxxxxxxxxxxxxxxxx/

- 'dt-binding: leds: LED Indicator' and 'dt-binding: leds: LED Flash' have
been applied by Rob in v12.
https://lore.kernel.org/all/166480917702.2250974.12439864185418442009.robh@xxxxxxxxxx/

- 'ADC driver' has been applied by Jonathan in v14.
https://lore.kernel.org/all/20221015162217.41c4c112@jic23-huawei/

In addition, we made some changes for MT6370 Flash/RGB drivers and document.
(see v18 section of the change log below).

Thank you,
ChiaEn Wu
---
Change in v18:
- In Patch 1/3 (MT6370 LED Indicator):
- Rename 'MT6370_VENID_MASK' to more human readable
'MT6370_VENDOR_ID_MASK'
- Define the const number vid.
- Unwrap each line by 100 chars limit.
- Remove the redudant space in 'mt6370_gen_breath_pattern()' comment for
patterh data allocation.
- Define a sub function 'mt6370_assign_multicolor_info()' to tidy up
'mt6370_init_led_properties()' for multicolor case.
- Define a sub function 'mt6370_multicolor_led_register' to tidy up
'mt6370_led_register()' for multicolor case.
- Refine 'fwnode_handle_put' in probe function with 'goto'.

- In Patch 2/3 (MT6370 Flash):
- Unwrap each line by 100 chars limit.
- For joint flash, add more comments above the source code.
- Remove 'sentinel' comment in of_device_id table declaration.

- In Patch 3/3 (Document of MT6370 LED Indicator):
- Revise the text in document title and description.


Change in v17:
- In Patch 1/3 (MT6370 LED Indicator):
- Update the year of Copyright from 2022 to 2023

- In Patch 2/3 (MT6370 Flash):
- Update the year of Copyright from 2022 to 2023

- In Patch 3/3 (Document of MT6370 LED Indicator):
- Add MT6370 RGB LED document for describing how the pattern works,
each timing period, and the pattern diagram.


Change in v16:
- In Patch 1/2 (MT6370 LED Indicator):
- Remove blank line in the head text.
- Move 'pwm_duty' to descrease the size of struct mt6370_pdata.
- Move the field 'F_RGB_EN' write out from if/else in
'mt6370_isnk_brightness_set'.
- Remove 'dev' in struct mt6370_priv.
- Remove the proprety reading for 'linux,default-trigger', led core
already did it.
- Change the module license from 'GPL v2' to 'GPL'
In the head text, already deslcred SPDX license as 'GPL-2.0-only'.

- In Patch 2/2 (MT6370 Flash):
- Remove blank line in the head text.
- For enum, declared the first element as 0
- Remove unusd default state and state define.
- For mt6370_priv, 'dev' member only be used once. Remove it.
- Refine assign operator for '?:', no need to use brackets for the
judgement.
- Refine '_mt6370_flash_brightness_set' function for else case.
- Modify 'struct led_flash_setting *setting' to 'struct
led_flash_setting *s'. This can reduce line count.
- Remove the revert logic in 'mt6370_strobe_set' function.
No need to do it.
- Remove mutex usage in timeout_set and fault_get.
Regmap lock already protect it.
- Add default label for switch case in fault_get.
- Directly assign fwnode as the parameter for 'mt6370_led_register' and
'mt6370_init_flash_config'.
- Due to struct mt6370_priv 'dev' member removed, pass 'dev' as the
input parameter for 'mt6370_init_flash_config'.
- For some if judgement, remove 'num > MT6370_MAX_LEDS'.
There's no need to check it. The below code already protect it.
- Group mt6360 and mt6370 in Makefile.
- SPDX already declared as 'GPL v2-only', change MODULE_LICENSE to
'GPL'.
- Add one more author for ChiYuan Huang.


Change in v15:
- In Patch 2/2 (MT6370 Flash):
- Remove 'depends on LEDS_CLASS_FLASH || !LEDS_CLASS_FLASH' in Kconfig


Change in v14:
- In Patch 3/3 (MT6370 Flash):
- Remove unused 'depend on OF' in Kconfig


Change in v13:
- In Patch 1/5 (dt-bindings: MT6370 LED Indicator):
- Remove 'allOf' property
- Add '$ref' and 'unevaluatedProperties: false' in 'multi-led'


Change in v12:
- In Patch 5/5 (MT6370 Flash):
- Rename all 'led_flash_setting *s' --> 'led_flash_setting *setting'
- Rename 'max_uA' --> 'max_ua' in mt6370_init_flash_properties()


Change in v11:
- In Patch 1/8 (dt-bindings: MT6370 Charger):
- Add more detailed description of irqs.
- Adujust the order of irqs


Change in v10:
- In Patch 6/8 (MT6370 Charger):
- Add a feature (disable input current limit) in
'mt6370_chg_init_setting()'
- Add the header file <linux/devm-helpers.h> for using
'devm_work_autocancel()' and 'devm_delayed_work_autocancel()
- Rename 'pwr_rdy' to 'opposite_pwr_rdy' in
'mt6370_chg_pwr_rdy_check()'
- Rename enum elements
('MT6370_ATTACH_STAT_ATTACH_BC12_NOT_DONE' -->
'MT6370_ATTACH_STAT_ATTACH_WAIT_FOR_BC12')
- Revise the assignment value of 'val.intval' in
'mt6370_chg_pwr_rdy_check()' to make the code easy to read.
- Revise the initialization of bc12_work (INIT_WORK() -->
using devm_work_autocancel()) and mivr_dwork
(INIT_DELAYED_WORK + devm_add_action_or_reset() -->
devm_delayed_work_autocancel())

- In Patch 8/8 (MT6370 LED Flashlight):
- Add the revert code when '__mt6370_flash_brightness_set()'
return failed.
- Revise type of 'led_no' (u32 -> u8)
- Revise type of 'default_state' (u32 -> enum led_default_state)
- Revise the return value of '_mt6370_flash_brightness_set()'
- Remove the useless function 'mt6370_init_common_properties()'
- Use 'led_init_default_state_get()' to init 'led->default_state'


Changes in v9:
- In Patch 05/10:
- Revise LINEAR_RANGE() and LINEAR_RANGE_IDX()

- In Patch 07/10:
- Fix wrong 'F_IINLMTSEL' setting in 'mt6370_chg_init_setting()'
- Revise the usage of LINEAR_RANGE_IDX()

- In Patch 09/10:
- Revise the format of the comments.

- In Patch 10/10:
- Revise the format of the comments.


Changes in v8:
- In Patch 06/12:
- Add linear_range_idx macro for declaring the linear_range
struct simply.

- In Patch 09/12:
- Remove MT6370_CHG_LINEAR_RANGE() macro, and change to use
LINEAR_RANGE_IDX() macro

- In Patch 10/12:
- Add include header file <linux/leds.h>
- Remove useless 'enum mt6370_state' because of using 'enum led_default_state'
- Revise the calculation of 'val' in 'mt6370_gen_breath_pattern()'
- Replace the medthod of getting default-state by using
led_init_default_state_get()

- In Patch 11/12:
- Add missing 'dependency config' in Kconfig
- Revise all multi-line comments

- In Patch 12/12:
- Add missing header file <linux/property.h>
- Remove useledd header file <linux/of_device.h>
- Revise the comment of 'mt6370_check_vendor_info()'


Changes in v7:
- In Patch 05/13:
- Add the second compatible string for 'mt6372'
- Add 'mediatek,bled-exponential-mode-enable' property for enable the
exponential mode of backlight brightness
- Add validation for the maximum value of 'default-brightness' and
'max-brightness'

- In Patch 07/13:
- Move '#define MT6370_REG_MAXADDR' to the next line of
'#define MT6370_REG_CHG_MASK1'
- Rename 'MT6370_REG_ADDRLEN' to 'MT6370_MAX_ADDRLEN'

- In Patch 08/13:
- Revise 'devm_add_action_or_reset(dev, ...)' to one line
- Revise 'return regmap_update_bits(...)' with using positive
conditional

- In Patch 09/13:
- Add AICR(100mA ~ 350mA), ICHG(100mA ~ 800mA) macros
- Remove 400mA AICR and 900mA ICHG macros
- Revise using 'if-else' to 'switch-case' in mt6370_adc_read_scale()
where the adc channel is ibus or ibat

- In Patch 10/13:
- Revise the method to enable/disable irq
- Revise all 'if (ret < 0)' to 'if (ret)' after using
mt6370_chg_field_set/get()
- Revise all 'OTG' text again

- In Patch 11/13:
- Add the comment for the union of 'struct mt6370_led'
- Revise the wrong description of 'Authors'
- Revise some typos (e.g. led --> LED)
- Revise 'if (!fwnode_property_read_string())' to
'ret = fwnode_property_read_string()'
- Replace 'memcpy(...)' with 'put_unaligned_be24()' in
mt6370_gen_breath_pattern()
- Replace all 'LED_OFF' with 0
- Remove the redundant assignment in mt6370_mc_pattern_clear()

- In Patch 12/13:
- Fix the indentation.
- For the well defined macro, the parenthesis is needed for input parameters.
- Replace some dev_warn to dev_info in 'init_flash_properties'.
- Add sentinel comment for the terminator entry of of_device_id.
- Use priv->fled_torch_used directly.
- Delete 0 in {}.
- Use _uA instead of _UA in definition.
- Refine the description.
- Use usleep_range instead of udelay.
- Rename config to LEDS_MT6370_FLASH.
- Add missing ">" in copyright.
- Change the Kconfig order

- In Patch 13/13:
- Add support 'exponential mode' property parsing
- Add 'return dev_err_probe()' after 'if (IS_ERR(priv->enable_gpio))'
- Add 'mt6372' compatible string
- Revise Kconfig help text
- Revise update()/get() for supporting 16384 steps (MT6372)
- Revise all shift usages form using 'ffs() and fls()' to defining the
_SHIFT macros.
- Revise 'brightness ? 1 : 0' to '!!brightness' in gpiod_set_value()


Changes in v6:
- In Patch 03/13:
- Add 'reg' property of led of multi-led to prevent checking
error.

- In Patch 08/13:
- Convert tcpci as device resource managed with
'devm_add_action_or_reset' api.
- Refine remvoe callback.
- Refine the commit text from 'this commit add' to 'add'.

- In Patch 09/13:
- Using 'struct device *dev = &pdev->dev' in probe()
- Revise the sixth parameter of regmap_read_poll_timeout() by
Replacing '1000' with 'MILLI'
- Revise the units of three macros
- MT6370_AICR_400MA --> MT6370_AICR_400_mA
- MT6370_ICHG_500MA --> MT6370_ICHG_500_mA
- MT6370_ICHG_900MA --> MT6370_ICHG_900_mA

- In patch 10/13:
- Remove the varable (*psy_desc) of struct mt6370_priv
- Remove the deprecated usb type (POWER_SUPPLY_TYPE_USB_CDP and
POWER_SUPPLY_TYPE_USB_DCP)
- Remove useless remove()
- Revise all units from mini- to micro-
- Revise get/set power_supply_prop (change to directly return get/set
regmap_field)
- Revise probe() and use devm_add_action_or_reset() for handling of the
workqueue/delayed_work/mutex
- Revise mt6370_chg_psy_desc
- Add '.name = "mt6370-charger"'
- Use 'static const'

- In patch 11/13:
- Remove the 'ko' from mt6370 led Kconfig description.
- Add both authors for Alice and ChiYuan.
- Use pdata to distinguish the code from mt6370/71 to mt6372.
- Instead of 'state' define, use the 'state' enum.
- Fix the typo for 'MT6372_PMW_DUTY'.
- For pwm_duty define, replace with bit macro - 1.
- Refine all the labels from 'out' to 'out_unlock'.
- Use struct 'dev' variable and 'dev_err_probe' to optimize the LOC.
- Revise for the array initialization from {0} to {}.
- Move into rgb folder and rename file name to 'leds-mt6370-rgb'.
- Refine the 'comma' usage in struct/enum.

- In patch 12/13:
- Use 'GENMASK' instead of 'BIT'.
- Use dev_err_probe to decrease LOC.
- Use 'dev' variable to make probe function more clean.
- Refine the return of _mt6370_flash_brightness_set function.
- Refine the descriptions.
- Use mt6370_clamp() instead of clamp_align().
- Use device resource managed API for v4l2 flash_release.


Changes in v5:
- In patch 07/13:
- Add the comma in the last REGMAP_IRQ_REG_LINE(),
DEFINE_RES_IRQ_NAMED() and MFD_CELL_RES()
- Add the prefix in the first parameter of all mfd_cell
- Move enum and struct mt6370_info to mt6370.h
- Remove struct device *dev in struct mt6370_info
- Revise the description of Kconfig help text
- Revise MODULE_DESCRIPTION()

- In patch 08/13:
- Add comma for the last index of mt6370_reg_init.
- Use dev_err_probe to decrease LOC.
- Use 'dev' variable to make probe function more clean.
- Refine kconfig text.
- Remove both 'else' in set_vbus callback.
- Remove comma for of_device_id if the assigned member is only one.

- In patch 09/13:
- Replace using snprintf() with sysfs_emit() in mt6370_adc_read_label()
- Remove macro ADC_CONV_TIME_US
- Revise all variable ordering
- Revise the description of Kconfig help text
- Revise MODULE_DESCRIPTION()

- In patch 10/13:
- Replace unsigned int type of pwr_rdy with bool in
mt6370_chg_set_online()
- Remove redundant 'else' in mt6370_chg_field_get()
- Revise 'if-else' in mt6370_chg_field_set()
- Revise 'if' condition in mt6370_chg_enable_irq()
- Revise all text 'otg' --> 'OTG'
- Revise MT6370_MIVR_IBUS_TH_100_MA --> MT6370_MIVR_IBUS_TH_100_mA
- Revise the description of Kconfig help text

- In patch 12/13:
- Refine the coding style.
- Use "dev" instead of "&pdev->dev".

- In patch 13/13:
- Add missed <mod_devicetable.h>
- Add struct device *dev in probe() to make code cleaning
- Remove useless including header file <gpio/driver.h>, <of.h>
- Remove useless variable uasage in mt6370_init_backlight_properties()
- Remove redundant checking enable_gpio in mt6370_bl_update_status()
- Remove redundant parentheses in mt6370_bl_get_brightness()
- Revise the description of Kconfig help text
- Revise the calculation of hys_th_steps


Changes in v4:
- In patch 02/13:
- Add minItems of "io-channel-names"
- Replace text "Mediatek" with "MediaTek"

- In patch 06/13:
- Roll back all "$ref: " to v2 patch style (using "/schemas/...")

- In patch 07/13:
- Replace text "Mediatek" with "MediaTek" in Kconfig
- Replace "first break and then return" with "return directly"
in "mt6370_check_vendor_info()"
- Add module name related description in Kconfig helptext
- Add Copyright in the source code
- Add header file "mt6370.h" for all "#define IRQ"
- Adjust Makefile order of MT6370
- Refine "bank_idx" and "bank_addr" in
"mt6375_regmap_read()" / "mt6375_regmap_write()"
- Refine redundant "else if" in "mt6370_regmap_read()"

- In patch 08/13:
- Replace text "Mediatek" with "MediaTek" in Kconfig
- Replace "first ret=regulator_(dis/en)able and then return"
with "return directly" in "mt6370_tcpc_set_vbus()"
- Replace header file <linux/of.h> with <linux/mod_devicetable.h>
- Add Copyright in the source code
- Add module name related description in Kconfig helptext
- Remove header file <linux/of.h>
- Refine all probe error by using dev_err_probe()

- In patch 09/13:
- Replace text "Mediatek" with "MediaTek"
- Replace all "first dev_err() and then return" with
"return dev_err_probe()"
- Add Copyright in the source code
- Add module name related description in Kconfig
- Add unit suffix of macro "ADC_CONV_POLLING_TIME"
- Add new macro "ADC_CONV_TIME_MS"
- Adjust the position of include file <mediatek,mt6370_adc.h>
- Adjust the postions between <linux/module.h> and
<linux/mod_devicetable.h>
- Fix some incorrect characters

- In patch 10/13:
- Replace text "Mediatek" with "MediaTek" in Kconfig and
MODULE_DESCRIPTION()
- Replace "mt6370_chg_val_to_reg" and "mt6370_chg_reg_to_val"
with "linear_range" API
- Replace "first break and then return" with "return directly"
in all cases of get/set power_supply_property
- Replace all "first dev_err() and then return" with "return
dev_err_probe()"
- Replace all "return IS_ERR(priv->rdev) ? PTR_ERR(priv->rdev) : 0"
with "PTR_ERR_OR_ZERO()"
- Replace "priv->dev->of_node" with "dev_of_node()"
- Add Copyright in the source code
- Add module name related description in Kconfig helptext
- Add proper unit of "MT6370_MIVR_IBUS_TH"
- Add error check in "mt6370_chg_get_status"
- Remove including <mediatek,mt6370_adc.h> header file
- Remove redundant comma of every enum terminator line
- Remove unwanted blank lines
- Remove the useless label (toggle_cfo_exit:)
- Remove using atomic
- Remove using of_match_ptr()
- Fix some incorrect characters
- Fix updating wrong bits when using ena_gpiod of OTG regulator
- Adjust the probe order in probe()

- In patch 11/13:
- Replace text "Mediatek" with "MediaTek" in Kconfig
- Replace text "const" with "constant" in Kconfig
- Add Copyright in the source code

- In patch 12/13:
- Replace text "Mediatek" with "MediaTek" in Kconfig
- Add Copyright in the source code

- In patch 13/13:
- Replace text "Mediatek" with "MediaTek" in Kconfig
- Add Copyright in the source code
- Revise the comment of "PWM HYS STEPS"


Changes in v3:
- Remove ADC ABI file, which is added in v2 Patch 7
- In patch 02/14:
- Add items and remove maxItems of io-channels
- Add io-channel-names and describe each item
- Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator"
- Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator"

- In patch 03/14:
- Use leds-class-multicolor.yaml instead of common.yaml.
- Split multi-led and led node.
- Add subdevice "led" in "multi-led".

- In patch 04/14:
- Remove the description of enum.

- In patch 05/14:
- Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
"mediatek,bled-pwm-hys-input-th-steps"
- Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
"bled-ocp-microamp" enum values

- In patch 06/14:
- Use " in entire patchset
- Refine ADC description
- Rename "enable-gpio" to "enable-gpios" in "regualtor"

- In patch 07/14:
- Refine Kconfig help text
- Refine error message of unknown vendor ID in
mt6370_check_vendor_info()
- Refine return value handling of mt6370_regmap_read()
- Refine all probe error by using dev_err_probe()
- Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
mt6370_regmap_write()
- Add "#define VENID*" and drop the comments in
mt6370_check_vendor_info()
- Drop "MFD" in MODULE_DESCRIPTION()

- In patch 09/14:
- Refine Kconfig help text

- In patch 10/14:
- Refine Kconfig help text
- Refine all channel value in read_scale()
a. current: uA --> mA
b. voltage: uV --> mV
c. temperature: degrees Celsius --> milli degrees Celsius
- Add "default:" condition of switch statement in read_scale() and read_raw()
- Add error message for reading ADC register failed
- Add the comment for adc_lock
- Add <linux/mod_devicetable.h> header file for struct of_device_id
- Replace "adc" text with "ADC" in all of the error messages

- In patch 12/14:
- Refine the grammer of the Kconfig.
- Change reg mode to the const current mode.

- In patch 14/14:
- Refine bool properties parsing (pwm-enable, ovp-shutdown, ocp-shutdown) in DT
parsing function
- Refine u32 and u8 properties parsing (pwm-hys-input-th-steps, ovp-microvolt,
ocp-microamp), from using register value to using actual value
- Refine error string of "channle-use" parsing failed
- Refine Kconfig help text


Changes in v2:
- In patch 01/15:
- Add "unevaluatedProperties: false".
- Delete "DT bindings".
- Refine the description to fit in 80 columns.
- Skip the connector description.

- In patch 02/15:
- Refine items description of interrupt-name
- Rename "usb-otg-vbus" to "usb-otg-vbus-regulator"
- Add constraint properties for ADC

- In patch 03/15:
- Skip not useful description of "^(multi-)?led@[0-3]$"
and reg.
- Due to the dependency, remove the mention of mfd
document directory.
- Delete Soft-start property. In design aspect, we think
soft-restart should always be enabled, our new chip
has deleted the related setting register , also, we don’t
allow user adjust this parameter in this chip.
- Refine the commit message.

- In patch 04/15:
- Skip not useful description of "^led@[0-1]$" and reg.
- Add apace after '#'.
- Refine the commit message.

- In patch 05/15:
- Remove "binding documentation" in subject title
- Refine description of mt6370 backlight binding
document
- Refine properties name(bled-pwm-hys-input-bit,
bled-ovp-microvolt, bled-ocp-microamp) and their
description

- In patch 06/15:
- Refine ADC and Regulator descriptions
- Refine include header usage in example
- Refine node name to generic node name("pmic@34")
- Refine led example indentation
- Refine license of mediatek,mt6370_adc.h
- Rename the dts example from IRQ define to number.
- Remove mediatek,mt6370.h

- In patch 07/15:
- Add ABI documentation for mt6370 non-standard ADC
sysfs interfaces.

- In patch 08/15:
- Add all IRQ define into mt6370.c.
- Refine include header usage

- In patch 09/15:
- No changes.

- In patch 10/15:
- Use 'gpiod_get_from_of_node' to replace
'fwnode_gpiod_get_index'.

- In patch 11/15:
- Refine Kconfig mt6370 help text
- Refine mask&shift to FIELD_PREP()
- Refine mutex lock name ("lock" -> "adc_lock")
- Refine mt6370_adc_read_scale()
- Refine mt6370_adc_read_offset()
- Refine mt6370_channel_labels[] by using enum to index
chan spec
- Refine MT6370_ADC_CHAN()
- Refine indio_dev->name
- Remove useless include header files

- In patch 12/15:
- Refine mt6370_chg_otg_rdesc.of_match
("mt6370,otg-vbus" -> "usb-otg-vbus-regulator") to match
DT binding

- In patch 13/15:
- Refine Kconfig description.
- Remove include "linux/of.h" and use
"linux/mod_devicetable.h".
- Place a comma for the last element of the const
unsigned int array.
- Add a comment line for the mutex 'lock'.
- In probe function, use 'dev_err_probe' in some
judgement to reduce the LOC.
- Refine include header usage.
BIT/GENMASK -> linux/bits.h
FIELD_GET -> linux/bitfield.h

- In patch 14/15:
- Add blank line.
- Replace container_of() with to_mt6370_led() .
- Refine description of ramping.
- Refine the mt6370_init_common_properties function.
- Refine the probe return.

- In patch 15/15:
- Refine MT6370 help text in Kconfig
- Refine DT Parse function
- Remove useless enum
- Add comment for 6372 backward compatible in
bl_update_status() and
check_vendor_info()
- Using dev_err_probe(); insteads dev_err()&return; in
the probe()




Documentation/leds/leds-mt6370-rgb.rst | 64 ++
drivers/leds/flash/Kconfig | 13 +
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-mt6370-flash.c | 573 ++++++++++++++++++
drivers/leds/rgb/Kconfig | 13 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-mt6370-rgb.c | 1010 ++++++++++++++++++++++++++++++++
7 files changed, 1675 insertions(+)
create mode 100644 Documentation/leds/leds-mt6370-rgb.rst
create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c

--
2.7.4