[PATCH 4/8] usb: dwc3: core: Refactor PHY logic to support Multiport Controller

From: Krishna Kurapati
Date: Fri Mar 10 2023 - 11:37:49 EST

Currently the DWC3 driver supports only single port controller
which requires at most one HS and one SS PHY.

But the DWC3 USB controller can be connected to multiple ports and
each port can have their own PHYs. Each port of the multiport
controller can either be HS+SS capable or HS only capable
Proper quantification of them is required to modify GUSB2PHYCFG
and GUSB3PIPECTL registers appropriately.

Add support for detecting, obtaining and configuring phy's supported
by a multiport controller and limit the max number of ports
supported to 4.

Signed-off-by: Harsh Agarwal <quic_harshq@xxxxxxxxxxx>
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 279 +++++++++++++++++++++++++++++-----------
drivers/usb/dwc3/core.h | 11 +-
drivers/usb/dwc3/drd.c | 13 +-
3 files changed, 219 insertions(+), 84 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 1ca9fa40a66e..936f1cfd4770 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -122,6 +122,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
+ int i;
u32 reg;
u32 desired_dr_role;

@@ -201,8 +202,10 @@ static void __dwc3_set_mode(struct work_struct *work)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
+ }
if (dwc->dis_split_quirk) {
reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
reg |= DWC3_GUCTL3_SPLITDISABLE;
@@ -217,8 +220,8 @@ static void __dwc3_set_mode(struct work_struct *work)

if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);

ret = dwc3_gadget_init(dwc);
if (ret)
@@ -660,22 +663,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
return ret;
}

-/**
- * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
- * @dwc: Pointer to our controller context structure
- *
- * Returns 0 on success. The USB PHY interfaces are configured but not
- * initialized. The PHY interfaces and the PHYs get initialized together with
- * the core in dwc3_core_init.
- */
-static int dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
{
unsigned int hw_mode;
u32 reg;

hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);

- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));

/*
* Make sure UX_EXIT_PX is cleared as that causes issues with some
@@ -730,9 +725,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_del_phy_power_chg_quirk)
reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;

- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
+
+ return 0;
+}
+
+static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
+{
+ unsigned int hw_mode;
+ u32 reg;

- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));

/* Select the HS PHY interface */
switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
@@ -744,7 +749,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
} else if (dwc->hsphy_interface &&
!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
} else {
/* Relying on default value. */
if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
@@ -801,7 +806,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel)
reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;

- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
+
+ return 0;
+}
+
+/**
+ * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
+ */
+static int dwc3_phy_setup(struct dwc3 *dwc)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < dwc->num_ss_ports; i++) {
+ ret = dwc3_ss_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ ret = dwc3_hs_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }

return 0;
}
@@ -840,6 +873,7 @@ static void dwc3_clk_disable(struct dwc3 *dwc)

static void dwc3_core_exit(struct dwc3 *dwc)
{
+ int i;
unsigned int hw_mode;

hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
@@ -848,13 +882,18 @@ static void dwc3_core_exit(struct dwc3 *dwc)

usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
- phy_power_off(dwc->usb2_generic_phy);
- phy_power_off(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_power_off(dwc->usb2_generic_phy[i]);
+ phy_power_off(dwc->usb3_generic_phy[i]);
+ }

usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
- phy_exit(dwc->usb2_generic_phy);
- phy_exit(dwc->usb3_generic_phy);
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_exit(dwc->usb2_generic_phy[i]);
+ phy_exit(dwc->usb3_generic_phy[i]);
+ }

dwc3_clk_disable(dwc);
reset_control_assert(dwc->reset);
@@ -1090,6 +1129,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
unsigned int hw_mode;
u32 reg;
int ret;
+ int i, j;

hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);

@@ -1124,14 +1164,27 @@ static int dwc3_core_init(struct dwc3 *dwc)

usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
- ret = phy_init(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err0a;

- ret = phy_init(dwc->usb3_generic_phy);
- if (ret < 0) {
- phy_exit(dwc->usb2_generic_phy);
- goto err0a;
+ for (i = 0; i < dwc->num_ports; i++) {
+ ret = phy_init(dwc->usb2_generic_phy[i]);
+ if (ret < 0) {
+ /* clean up prior initialized HS PHYs */
+ for (j = 0; j < i; j++)
+ phy_exit(dwc->usb2_generic_phy[j]);
+ goto err0a;
+ }
+ }
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ ret = phy_init(dwc->usb3_generic_phy[i]);
+ if (ret < 0) {
+ /* clean up prior initialized SS PHYs */
+ for (j = 0; j < i; j++)
+ phy_exit(dwc->usb3_generic_phy[j]);
+ for (j = 0; j < dwc->num_ports; j++)
+ phy_exit(dwc->usb2_generic_phy[j]);
+ goto err0a;
+ }
}

ret = dwc3_core_soft_reset(dwc);
@@ -1141,15 +1194,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
if (!dwc->dis_u3_susphy_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg |= DWC3_GUSB3PIPECTL_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ for (i = 0; i < dwc->num_ss_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
+ reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
+ }
}

if (!dwc->dis_u2_susphy_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ for (i = 0; i < dwc->num_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
}
}

@@ -1173,13 +1230,24 @@ static int dwc3_core_init(struct dwc3 *dwc)

usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
- ret = phy_power_on(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err2;

- ret = phy_power_on(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err3;
+ for (i = 0; i < dwc->num_ports; i++) {
+ ret = phy_power_on(dwc->usb2_generic_phy[i]);
+ if (ret < 0) {
+ for (j = 0; j < i; j++)
+ phy_power_off(dwc->usb2_generic_phy[j]);
+ goto err2;
+ }
+ }
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ ret = phy_power_on(dwc->usb3_generic_phy[i]);
+ if (ret < 0) {
+ for (j = 0; j < i; j++)
+ phy_power_off(dwc->usb3_generic_phy[j]);
+ goto err3;
+ }
+ }

if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) {
ret = dwc3_event_buffers_setup(dwc);
@@ -1304,10 +1372,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
return 0;

err4:
- phy_power_off(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_ports; i++)
+ phy_power_off(dwc->usb3_generic_phy[i]);

err3:
- phy_power_off(dwc->usb2_generic_phy);
+ for (i = 0; i < dwc->num_ports; i++)
+ phy_power_off(dwc->usb2_generic_phy[i]);

err2:
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -1316,8 +1386,11 @@ static int dwc3_core_init(struct dwc3 *dwc)
err1:
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
- phy_exit(dwc->usb2_generic_phy);
- phy_exit(dwc->usb3_generic_phy);
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_exit(dwc->usb2_generic_phy[i]);
+ phy_exit(dwc->usb3_generic_phy[i]);
+ }

err0a:
dwc3_ulpi_exit(dwc);
@@ -1326,6 +1399,38 @@ static int dwc3_core_init(struct dwc3 *dwc)
return ret;
}

+static int dwc3_get_multiport_phys(struct dwc3 *dwc)
+{
+ int ret;
+ struct device *dev = dwc->dev;
+ int i;
+ char phy_name[11];
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ sprintf(phy_name, "usb2-port%d", i);
+ dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb2_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb2_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb2_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "usb2 phy: %s not configured\n", phy_name);
+ }
+
+ sprintf(phy_name, "usb3-port%d", i);
+ dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb3_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb3_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb3_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "usb3 phy: %s not configured\n", phy_name);
+ }
+ }
+
+ return 0;
+}
+
static int dwc3_core_get_phy(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
@@ -1356,20 +1461,24 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}

- dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
- if (IS_ERR(dwc->usb2_generic_phy)) {
- ret = PTR_ERR(dwc->usb2_generic_phy);
+ if (dwc->num_ports > 1)
+ return dwc3_get_multiport_phys(dwc);
+
+
+ dwc->usb2_generic_phy[0] = devm_phy_get(dev, "usb2-phy");
+ if (IS_ERR(dwc->usb2_generic_phy[0])) {
+ ret = PTR_ERR(dwc->usb2_generic_phy[0]);
if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb2_generic_phy = NULL;
+ dwc->usb2_generic_phy[0] = NULL;
else
return dev_err_probe(dev, ret, "no usb2 phy configured\n");
}

- dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
- if (IS_ERR(dwc->usb3_generic_phy)) {
- ret = PTR_ERR(dwc->usb3_generic_phy);
+ dwc->usb3_generic_phy[0] = devm_phy_get(dev, "usb3-phy");
+ if (IS_ERR(dwc->usb3_generic_phy[0])) {
+ ret = PTR_ERR(dwc->usb3_generic_phy[0]);
if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb3_generic_phy = NULL;
+ dwc->usb3_generic_phy[0] = NULL;
else
return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}
@@ -1381,6 +1490,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
int ret;
+ int i;

switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
@@ -1388,8 +1498,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)

if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);

ret = dwc3_gadget_init(dwc);
if (ret)
@@ -1400,8 +1510,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)

if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
+ }

ret = dwc3_host_init(dwc);
if (ret)
@@ -1823,6 +1935,7 @@ static int dwc3_probe(struct platform_device *pdev)
struct dwc3 *dwc;

int ret;
+ int i;
unsigned int hw_mode;

void __iomem *regs;
@@ -2020,13 +2133,19 @@ static int dwc3_probe(struct platform_device *pdev)

usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
- phy_power_off(dwc->usb2_generic_phy);
- phy_power_off(dwc->usb3_generic_phy);
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_power_off(dwc->usb2_generic_phy[i]);
+ phy_power_off(dwc->usb3_generic_phy[i]);
+ }

usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
- phy_exit(dwc->usb2_generic_phy);
- phy_exit(dwc->usb3_generic_phy);
+
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_exit(dwc->usb2_generic_phy[i]);
+ phy_exit(dwc->usb3_generic_phy[i]);
+ }

dwc3_ulpi_exit(dwc);

@@ -2108,6 +2227,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)

static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
+ int i;
unsigned long flags;
u32 reg;

@@ -2128,17 +2248,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
/* Let controller to suspend HSPHY before PHY driver suspends */
if (dwc->dis_u2_susphy_quirk ||
dwc->dis_enblslpm_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
- DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ for (i = 0; i < dwc->num_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
+ DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }

/* Give some time for USB2 PHY to suspend */
usleep_range(5000, 6000);
}

- phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
+ phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* do nothing during runtime_suspend */
@@ -2167,6 +2291,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
int ret;
+ int i;
u32 reg;

switch (dwc->current_dr_role) {
@@ -2187,17 +2312,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
break;
}
/* Restore GUSB2PHYCFG bits that were modified in suspend */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (dwc->dis_u2_susphy_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ for (i = 0; i < dwc->num_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ if (dwc->dis_u2_susphy_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;

- if (dwc->dis_enblslpm_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+ if (dwc->dis_enblslpm_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;

- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }

- phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_ports; i++) {
+ phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
+ phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* nothing to do on runtime_resume */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 74386d6a0277..e63e6b514d0d 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -35,6 +35,9 @@

#define DWC3_MSG_MAX 500

+/* Numer of ports supported by a multiport controller */
+#define MAX_PORTS_SUPPORTED 4
+
/* XHCI Reg constants */
#define DWC3_XHCI_HCSPARAMS1 0x04

@@ -1030,8 +1033,8 @@ struct dwc3_scratchpad_array {
* presuming each port is atleast HS capable
* @num_ss_ports: Indicates the number of USB ports present on HW that are
* SS Capable
- * @usb2_generic_phy: pointer to USB2 PHY
- * @usb3_generic_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to array of USB2 PHY
+ * @usb3_generic_phy: pointer to array of USB3 PHY
* @phys_ready: flag to indicate that PHYs are ready
* @ulpi: pointer to ulpi interface
* @ulpi_ready: flag to indicate that ULPI is initialized
@@ -1167,8 +1170,8 @@ struct dwc3 {

u32 num_ports;
u32 num_ss_ports;
- struct phy *usb2_generic_phy;
- struct phy *usb3_generic_phy;
+ struct phy *usb2_generic_phy[MAX_PORTS_SUPPORTED];
+ struct phy *usb3_generic_phy[MAX_PORTS_SUPPORTED];

bool phys_ready;

diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 039bf241769a..b34260b627fe 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -328,6 +328,7 @@ static void dwc3_otg_device_exit(struct dwc3 *dwc)
void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
{
int ret;
+ int i;
u32 reg;
int id;
unsigned long flags;
@@ -386,9 +387,11 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
- PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_ports; i++) {
+ if (dwc->usb2_generic_phy[i])
+ phy_set_mode(dwc->usb2_generic_phy[i],
+ PHY_MODE_USB_HOST);
+ }
}
break;
case DWC3_OTG_ROLE_DEVICE:
@@ -400,8 +403,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)

if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
+ if (dwc->usb2_generic_phy[0])
+ phy_set_mode(dwc->usb2_generic_phy[0],
PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
--
2.39.0