[PATCH 5/8] usb: dwc3: qcom: Add multiport controller support for qcom wrapper

[Krishna Kurapati]

QCOM SoC SA8295P's teritiary quad port controller supports 2 HS+SS
ports and 2 HS only ports. Add support for configuring PWR_EVENT_IRQ's
for all the ports during suspend/resume.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 959fc925ca7c..0396f3e9bbe9 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -37,7 +37,10 @@
 #define PIPE3_PHYSTATUS_SW			BIT(3)
 #define PIPE_UTMI_CLK_DIS			BIT(8)
 
-#define PWR_EVNT_IRQ_STAT_REG			0x58
+#define PWR_EVNT_IRQ1_STAT_REG			0x58
+#define PWR_EVNT_IRQ2_STAT_REG			0x1dc
+#define PWR_EVNT_IRQ3_STAT_REG			0x228
+#define PWR_EVNT_IRQ4_STAT_REG			0x238
 #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
 #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
 
@@ -93,6 +96,13 @@ struct dwc3_qcom {
 	struct icc_path		*icc_path_apps;
 };
 
+static u32 pwr_evnt_irq_stat_reg_offset[4] = {
+			PWR_EVNT_IRQ1_STAT_REG,
+			PWR_EVNT_IRQ2_STAT_REG,
+			PWR_EVNT_IRQ3_STAT_REG,
+			PWR_EVNT_IRQ4_STAT_REG,
+};
+
 static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
 {
 	u32 reg;
@@ -413,13 +423,16 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
 {
 	u32 val;
 	int i, ret;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
 	if (qcom->is_suspended)
 		return 0;
 
-	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
-	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
-		dev_err(qcom->dev, "HS-PHY not in L2\n");
+	for (i = 0; i < dwc->num_ports; i++) {
+		val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
+		if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+			dev_err(qcom->dev, "HS-PHY%d not in L2\n", i);
+	}
 
 	for (i = qcom->num_clocks - 1; i >= 0; i--)
 		clk_disable_unprepare(qcom->clks[i]);
@@ -446,6 +459,7 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
 {
 	int ret;
 	int i;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
 	if (!qcom->is_suspended)
 		return 0;
@@ -467,8 +481,10 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
 		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
 
 	/* Clear existing events from PHY related to L2 in/out */
-	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
-			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+	for (i = 0; i < dwc->num_ports; i++)
+		dwc3_qcom_setbits(qcom->qscratch_base,
+			pwr_evnt_irq_stat_reg_offset[i],
+			PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
 
 	qcom->is_suspended = false;
 
-- 
2.39.0