Aw: Re: [PATCH net-next v12 08/18] net: ethernet: mtk_eth_soc: fix 1000Base-X and 2500Base-X modes
From: Frank Wunderlich
Date: Sat Mar 11 2023 - 07:06:30 EST
Hi
> Gesendet: Mittwoch, 08. März 2023 um 16:24 Uhr
> Von: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
> > > It would be nice to add these to my database - please send me the
> > > output of ethtool -m $iface raw on > foo.bin for each module.
>
> so if you can do that for me, then I can see whether it's likely that
> the patches that are already in mainline will do anything to solve
> the workaround you've had to add for the hw signals.
i got the 2.5G copper sfps, and tried them...they work well with the v12 (including this patch), but not in v13...
i dumped the eeprom like you mention for your database:
$ hexdump -C 2g5_sfp.bin
00000000 03 04 07 00 01 00 00 00 00 02 00 05 19 00 00 00 |................|
00000010 1e 14 00 00 4f 45 4d 20 20 20 20 20 20 20 20 20 |....OEM |
00000020 20 20 20 20 00 00 00 00 53 46 50 2d 32 2e 35 47 | ....SFP-2.5G|
00000030 2d 54 20 20 20 20 20 20 31 2e 30 20 03 52 00 19 |-T 1.0 .R..|
00000040 00 1a 00 00 53 4b 32 33 30 31 31 31 30 30 30 38 |....SK2301110008|
00000050 20 20 20 20 32 33 30 31 31 30 20 20 68 f0 01 e8 | 230110 h...|
00000060 00 00 11 37 4f 7a dc ff 3d c0 6e 74 9b 7c 06 ca |...7Oz..=.nt.|..|
00000070 e1 d0 f9 00 00 00 00 00 00 00 00 00 08 f0 fc 64 |...............d|
00000080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00000100 5f 00 ce 00 5a 00 d3 00 8c a0 75 30 88 b8 79 18 |_...Z.....u0..y.|
00000110 1d 4c 01 f4 19 64 03 e8 4d f0 06 30 3d e8 06 f2 |.L...d..M..0=...|
00000120 2b d4 00 c7 27 10 00 df 00 00 00 00 00 00 00 00 |+...'...........|
00000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000140 00 00 00 00 3f 80 00 00 00 00 00 00 01 00 00 00 |....?...........|
00000150 01 00 00 00 01 00 00 00 01 00 00 00 00 00 00 f1 |................|
00000160 29 1a 82 41 0b b8 13 88 0f a0 ff ff ff ff 80 ff |)..A............|
00000170 00 00 ff ff 00 00 ff ff 04 ff ff ff ff ff ff 00 |................|
00000180 43 4e 53 38 54 55 54 41 41 43 33 30 2d 31 34 31 |CNS8TUTAAC30-141|
00000190 30 2d 30 34 56 30 34 20 49 fb 46 00 00 00 00 29 |0-04V04 I.F....)|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 aa aa |................|
000001c0 47 4c 43 2d 54 20 20 20 20 20 20 20 20 20 20 20 |GLC-T |
000001d0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 97 | .|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 40 00 40 00 00 00 00 |.........@.@....|
how can we add a quirk to support this?
some more information:
root@bpi-r3:~# ethtool eth1
Settings for eth1:
Supported ports: [ FIBRE ]
Supported link modes: 2500baseX/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 2500baseX/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 2500Mb/s
Duplex: Full
Auto-negotiation: on
Port: FIBRE
PHYAD: 0
Transceiver: internal
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes
root@bpi-r3:~# ethtool -m eth1
Identifier : 0x03 (SFP)
Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector : 0x07 (LC)
Transceiver codes : 0x00 0x01 0x00 0x00 0x00 0x00 0x02 0x00 0x00
Transceiver type : SONET: OC-48, short reach
Encoding : 0x05 (SONET Scrambled)
BR, Nominal : 2500MBd
Rate identifier : 0x00 (unspecified)
Length (SMF,km) : 0km
Length (SMF) : 0m
Length (50um) : 300m
Length (62.5um) : 200m
Length (Copper) : 0m
Length (OM3) : 0m
Laser wavelength : 850nm
Vendor name : OEM
Vendor OUI : 00:00:00
Vendor PN : SFP-2.5G-T
Vendor rev : 1.0
Option values : 0x00 0x1a
Option : RX_LOS implemented
Option : TX_FAULT implemented
Option : TX_DISABLE implemented
BR margin, max : 0%
BR margin, min : 0%
Vendor SN : SK2301110008
Date code : 230110
Optical diagnostics support : Yes
Laser bias current : 6.000 mA
Laser output power : 0.5000 mW / -3.01 dBm
Receiver signal average optical power : 0.4000 mW / -3.98 dBm
Module temperature : 28.21 degrees C / 82.78 degrees F
Module voltage : 3.3067 V
Alarm/warning flags implemented : Yes
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 15.000 mA
Laser bias current low alarm threshold : 1.000 mA
Laser bias current high warning threshold : 13.000 mA
Laser bias current low warning threshold : 2.000 mA
Laser output power high alarm threshold : 1.9952 mW / 3.00 dBm
Laser output power low alarm threshold : 0.1584 mW / -8.00 dBm
Laser output power high warning threshold : 1.5848 mW / 2.00 dBm
Laser output power low warning threshold : 0.1778 mW / -7.50 dBm
Module temperature high alarm threshold : 95.00 degrees C / 203.00 degrees F
Module temperature low alarm threshold : -50.00 degrees C / -58.00 degrees F
Module temperature high warning threshold : 90.00 degrees C / 194.00 degrees F
Module temperature low warning threshold : -45.00 degrees C / -49.00 degrees F
Module voltage high alarm threshold : 3.6000 V
Module voltage low alarm threshold : 3.0000 V
Module voltage high warning threshold : 3.5000 V
Module voltage low warning threshold : 3.1000 V
Laser rx power high alarm threshold : 1.1220 mW / 0.50 dBm
Laser rx power low alarm threshold : 0.0199 mW / -17.01 dBm
Laser rx power high warning threshold : 1.0000 mW / 0.00 dBm
Laser rx power low warning threshold : 0.0223 mW / -16.52 dBm
i guess this sfp have a phy as it can operate in 100/1000/2500 mode like described on the module.
but only tested in 2500base-T mode only.
regards Frank