Re: [PATCH v5 2/2] iio: adc: Add TI ADS1100 and ADS1000

[Jonathan Cameron]

On Tue, 7 Mar 2023 14:24:44 +0200
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:

> On Tue, Mar 07, 2023 at 07:55:34AM +0100, Mike Looijmans wrote:
> > The ADS1100 is a 16-bit ADC (at 8 samples per second).
> > The ADS1000 is similar, but has a fixed data rate.  
> 
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> 
> But see below.

I tidied that up and made a few other trivial whitespace tweaks whilst
applying.

Applied to the togreg branch of iio.git and pushed out as testing for 0-day
to see if it can find anything we missed.

Thanks,

Jonathan

> 
> > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>

> > +
> > +static int ads1100_set_scale(struct ads1100_data *data, int val, int val2)
> > +{
> > +	int microvolts;
> > +	int gain;
> > +
> > +	/* With Vdd between 2.7 and 5V, the scale is always below 1 */
> > +	if (val)
> > +		return -EINVAL;
> > +
> > +	if (!val2)
> > +		return -EINVAL;
> > +
> > +	microvolts = regulator_get_voltage(data->reg_vdd);
> > +	/*
> > +	 * val2 is in 'micro' units, n = val2 / 1000000
> > +	 * result must be millivolts, d = microvolts / 1000
> > +	 * the full-scale value is d/n, corresponds to 2^15,
> > +	 * hence the gain = (d / n) >> 15, factoring out the 1000 and moving the
> > +	 * bitshift so everything fits in 32-bits yields this formula.
> > +	 */
> > +	gain = DIV_ROUND_CLOSEST(microvolts, BIT(15)) * MILLI / val2;
> > +	if (gain < BIT(0) || gain > BIT(3))
> > +		return -EINVAL;
> > +
> > +	ads1100_set_config_bits(data, ADS1100_PGA_MASK, ffs(gain) - 1);

I added a blank line here and in one other place for consistency + I like
them before simple return statements.

> > +	return 0;
> > +}
> > +
> > +static int ads1100_set_data_rate(struct ads1100_data *data, int chan, int rate)
> > +{
> > +	unsigned int i;
> > +	unsigned int size;
> > +
> > +	size = data->supports_data_rate ? ARRAY_SIZE(ads1100_data_rate) : 1;
> > +	for (i = 0; i < size; i++) {
> > +		if (ads1100_data_rate[i] == rate)
> > +			return ads1100_set_config_bits(data, ADS1100_DR_MASK,  
> 
> > +						       FIELD_PREP
> > +						       (ADS1100_DR_MASK, i));  
> 
> This is better on a single line.

Fixed up whilst applying.

> 
> > +	}
> > +
> > +	return -EINVAL;
> > +}
> > +