Re: [PATCH v2 1/6] hwmon: (aquacomputer_d5next) Support one byte control values

[Guenter Roeck]

On Tue, Feb 14, 2023 at 11:02:16PM +0100, Leonard Anderweit wrote:
> Add support for one byte control values. This extends aqc_set_ctrl_val() and
> aqc_get_ctrl_val() with a type. Currently supported types are AQC_8 (one byte)
> and AQC_BE16 (two bytes big endian). More types will be added in the future.
> 
> Signed-off-by: Leonard Anderweit <leonard.anderweit@xxxxxxxxx>

Applied. In the future, please make sure that the line length in the
description has no more than 75 columns.

Thanks,
Guenter

> ---
>  drivers/hwmon/aquacomputer_d5next.c | 48 +++++++++++++++++++++++------
>  1 file changed, 38 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index 12682a610ce7..babfd998e70c 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -70,6 +70,10 @@ static u8 secondary_ctrl_report[] = {
>  /* Report IDs for legacy devices */
>  #define POWERADJUST3_STATUS_REPORT_ID	0x03
>  
> +/* Data types for reading and writing control reports */
> +#define AQC_8		0
> +#define AQC_BE16	1
> +
>  /* Info, sensor sizes and offsets for most Aquacomputer devices */
>  #define AQC_SERIAL_START		0x3
>  #define AQC_FIRMWARE_VERSION		0xD
> @@ -544,7 +548,7 @@ static int aqc_send_ctrl_data(struct aqc_data *priv)
>  }
>  
>  /* Refreshes the control buffer and stores value at offset in val */
> -static int aqc_get_ctrl_val(struct aqc_data *priv, int offset, long *val)
> +static int aqc_get_ctrl_val(struct aqc_data *priv, int offset, long *val, int type)
>  {
>  	int ret;
>  
> @@ -554,14 +558,23 @@ static int aqc_get_ctrl_val(struct aqc_data *priv, int offset, long *val)
>  	if (ret < 0)
>  		goto unlock_and_return;
>  
> -	*val = (s16)get_unaligned_be16(priv->buffer + offset);
> +	switch (type) {
> +	case AQC_BE16:
> +		*val = (s16)get_unaligned_be16(priv->buffer + offset);
> +		break;
> +	case AQC_8:
> +		*val = priv->buffer[offset];
> +		break;
> +	default:
> +		ret = -EINVAL;
> +	}
>  
>  unlock_and_return:
>  	mutex_unlock(&priv->mutex);
>  	return ret;
>  }
>  
> -static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val)
> +static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val, int type)
>  {
>  	int ret;
>  
> @@ -571,7 +584,19 @@ static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val)
>  	if (ret < 0)
>  		goto unlock_and_return;
>  
> -	put_unaligned_be16((s16)val, priv->buffer + offset);
> +	switch (type) {
> +	case AQC_BE16:
> +		put_unaligned_be16((s16)val, priv->buffer + offset);
> +		break;
> +	case AQC_8:
> +		priv->buffer[offset] = (u8)val;
> +		break;
> +	default:
> +		ret = -EINVAL;
> +	}
> +
> +	if (ret < 0)
> +		goto unlock_and_return;
>  
>  	ret = aqc_send_ctrl_data(priv);
>  
> @@ -775,7 +800,7 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>  		case hwmon_temp_offset:
>  			ret =
>  			    aqc_get_ctrl_val(priv, priv->temp_ctrl_offset +
> -					     channel * AQC_SENSOR_SIZE, val);
> +					     channel * AQC_SENSOR_SIZE, val, AQC_BE16);
>  			if (ret < 0)
>  				return ret;
>  
> @@ -791,7 +816,8 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>  			*val = priv->speed_input[channel];
>  			break;
>  		case hwmon_fan_pulses:
> -			ret = aqc_get_ctrl_val(priv, priv->flow_pulses_ctrl_offset, val);
> +			ret = aqc_get_ctrl_val(priv, priv->flow_pulses_ctrl_offset,
> +					       val, AQC_BE16);
>  			if (ret < 0)
>  				return ret;
>  			break;
> @@ -804,7 +830,8 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>  		break;
>  	case hwmon_pwm:
>  		if (priv->fan_ctrl_offsets) {
> -			ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel], val);
> +			ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel],
> +					       val, AQC_BE16);
>  			if (ret < 0)
>  				return ret;
>  
> @@ -877,7 +904,7 @@ static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>  			val = clamp_val(val, -15000, 15000) / 10;
>  			ret =
>  			    aqc_set_ctrl_val(priv, priv->temp_ctrl_offset +
> -					     channel * AQC_SENSOR_SIZE, val);
> +					     channel * AQC_SENSOR_SIZE, val, AQC_BE16);
>  			if (ret < 0)
>  				return ret;
>  			break;
> @@ -889,7 +916,8 @@ static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>  		switch (attr) {
>  		case hwmon_fan_pulses:
>  			val = clamp_val(val, 10, 1000);
> -			ret = aqc_set_ctrl_val(priv, priv->flow_pulses_ctrl_offset, val);
> +			ret = aqc_set_ctrl_val(priv, priv->flow_pulses_ctrl_offset,
> +					       val, AQC_BE16);
>  			if (ret < 0)
>  				return ret;
>  			break;
> @@ -906,7 +934,7 @@ static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>  					return pwm_value;
>  
>  				ret = aqc_set_ctrl_val(priv, priv->fan_ctrl_offsets[channel],
> -						       pwm_value);
> +						       pwm_value, AQC_BE16);
>  				if (ret < 0)
>  					return ret;
>  			}