Re: [PATCH v4 3/4] hwmon: (pmbus/core): Add interrupt support

From: Guenter Roeck
Date: Sun Mar 12 2023 - 13:55:17 EST


On Wed, Mar 01, 2023 at 05:44:33PM +0100, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
>
> Implement PMBUS irq handler.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
> ...

This should be "---"

Applied.

Thanks,
Guenter

> Changes in V4:
> - Clear fault using pmbus_clear_faults at end of interrupt handler.
> - Remove for loop.
> Changes in V3:
> - Remove pmbus word check for SMBALERT writes
> - Remove variable ret & use err instead.
> - Use dev_dbg_once instead of error.
> - Remove error print when writing to misc_status register.
> - Move client irq check to pmbus_irq_setup.
> ---
> drivers/hwmon/pmbus/pmbus.h | 2 +-
> drivers/hwmon/pmbus/pmbus_core.c | 70 ++++++++++++++++++++++++++++++++
> 2 files changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
> index 713ea7915425..11e84e141126 100644
> --- a/drivers/hwmon/pmbus/pmbus.h
> +++ b/drivers/hwmon/pmbus/pmbus.h
> @@ -26,7 +26,7 @@ enum pmbus_regs {
>
> PMBUS_CAPABILITY = 0x19,
> PMBUS_QUERY = 0x1A,
> -
> + PMBUS_SMBALERT_MASK = 0x1B,
> PMBUS_VOUT_MODE = 0x20,
> PMBUS_VOUT_COMMAND = 0x21,
> PMBUS_VOUT_TRIM = 0x22,
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index f8ac9016ea0e..dfd227459d8b 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -3105,6 +3105,72 @@ static int pmbus_regulator_register(struct pmbus_data *data)
> }
> #endif
>
> +static int pmbus_write_smbalert_mask(struct i2c_client *client, u8 page, u8 reg, u8 val)
> +{
> + return pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8));
> +}
> +
> +static irqreturn_t pmbus_fault_handler(int irq, void *pdata)
> +{
> + struct pmbus_data *data = pdata;
> + struct i2c_client *client = to_i2c_client(data->dev);
> +
> + mutex_lock(&data->update_lock);
> + /* TODO: Check status flag & notify hwmon events */
> +
> + pmbus_clear_faults(client);
> + mutex_unlock(&data->update_lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int pmbus_irq_setup(struct i2c_client *client, struct pmbus_data *data)
> +{
> + struct device *dev = &client->dev;
> + const struct pmbus_status_category *cat;
> + const struct pmbus_status_assoc *bit;
> + int i, j, err, func;
> + u8 mask;
> +
> + static const u8 misc_status[] = {PMBUS_STATUS_CML, PMBUS_STATUS_OTHER,
> + PMBUS_STATUS_MFR_SPECIFIC, PMBUS_STATUS_FAN_12,
> + PMBUS_STATUS_FAN_34};
> +
> + if (!client->irq)
> + return 0;
> +
> + for (i = 0; i < data->info->pages; i++) {
> + func = data->info->func[i];
> +
> + for (j = 0; j < ARRAY_SIZE(pmbus_status_flag_map); j++) {
> + cat = &pmbus_status_flag_map[j];
> + if (!(func & cat->func))
> + continue;
> + mask = 0;
> + for (bit = cat->bits; bit->pflag; bit++)
> + mask |= bit->pflag;
> +
> + err = pmbus_write_smbalert_mask(client, i, cat->reg, ~mask);
> + if (err)
> + dev_dbg_once(dev, "Failed to set smbalert for reg 0x%02x\n",
> + cat->reg);
> + }
> +
> + for (j = 0; j < ARRAY_SIZE(misc_status); j++)
> + pmbus_write_smbalert_mask(client, i, misc_status[j], 0xff);
> + }
> +
> + /* Register notifiers */
> + err = devm_request_threaded_irq(dev, client->irq, NULL, pmbus_fault_handler, 0,
> + "pmbus-irq", data);
> + if (err) {
> + dev_err(dev, "failed to request an irq %d\n", err);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> static struct dentry *pmbus_debugfs_dir; /* pmbus debugfs directory */
>
> #if IS_ENABLED(CONFIG_DEBUG_FS)
> @@ -3467,6 +3533,10 @@ int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info)
> if (ret)
> return ret;
>
> + ret = pmbus_irq_setup(client, data);
> + if (ret)
> + return ret;
> +
> ret = pmbus_init_debugfs(client, data);
> if (ret)
> dev_warn(dev, "Failed to register debugfs\n");