[PATCH v13 073/113] KVM: x86: Add a switch_db_regs flag to handle TDX's auto-switched behavior

[isaku . yamahata]

From: Isaku Yamahata <isaku.yamahata@xxxxxxxxx>

Add a flag, KVM_DEBUGREG_AUTO_SWITCHED_GUEST, to skip saving/restoring DRs
irrespective of any other flags.  TDX-SEAM unconditionally saves and
restores guest DRs and reset to architectural INIT state on TD exit.
So, KVM needs to save host DRs before TD enter without restoring guest DRs
and restore host DRs after TD exit.

Opportunistically convert the KVM_DEBUGREG_* definitions to use BIT().

Reported-by: Xiaoyao Li <xiaoyao.li@xxxxxxxxx>
Signed-off-by: Sean Christopherson <sean.j.christopherson@xxxxxxxxx>
Co-developed-by: Chao Gao <chao.gao@xxxxxxxxx>
Signed-off-by: Chao Gao <chao.gao@xxxxxxxxx>
Signed-off-by: Isaku Yamahata <isaku.yamahata@xxxxxxxxx>
---
 arch/x86/include/asm/kvm_host.h | 10 ++++++++--
 arch/x86/kvm/vmx/tdx.c          |  1 +
 arch/x86/kvm/x86.c              | 11 ++++++++---
 3 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index b462be0482a1..3e00fd1eb136 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -603,8 +603,14 @@ struct kvm_pmu {
 struct kvm_pmu_ops;
 
 enum {
-	KVM_DEBUGREG_BP_ENABLED = 1,
-	KVM_DEBUGREG_WONT_EXIT = 2,
+	KVM_DEBUGREG_BP_ENABLED		= BIT(0),
+	KVM_DEBUGREG_WONT_EXIT		= BIT(1),
+	/*
+	 * Guest debug registers (DR0-3 and DR6) are saved/restored by hardware
+	 * on exit from or enter to guest. KVM needn't switch them. Because DR7
+	 * is cleared on exit from guest, DR7 need to be saved/restored.
+	 */
+	KVM_DEBUGREG_AUTO_SWITCH	= BIT(2),
 };
 
 struct kvm_mtrr_range {
diff --git a/arch/x86/kvm/vmx/tdx.c b/arch/x86/kvm/vmx/tdx.c
index ba9669d56ea3..e354fd08cbaf 100644
--- a/arch/x86/kvm/vmx/tdx.c
+++ b/arch/x86/kvm/vmx/tdx.c
@@ -517,6 +517,7 @@ int tdx_vcpu_create(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.efer = EFER_SCE | EFER_LME | EFER_LMA | EFER_NX;
 
+	vcpu->arch.switch_db_regs = KVM_DEBUGREG_AUTO_SWITCH;
 	vcpu->arch.cr0_guest_owned_bits = -1ul;
 	vcpu->arch.cr4_guest_owned_bits = -1ul;
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a086bb6e4460..84e4b00cc21a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -10674,7 +10674,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.guest_fpu.xfd_err)
 		wrmsrl(MSR_IA32_XFD_ERR, vcpu->arch.guest_fpu.xfd_err);
 
-	if (unlikely(vcpu->arch.switch_db_regs)) {
+	if (unlikely(vcpu->arch.switch_db_regs & ~KVM_DEBUGREG_AUTO_SWITCH)) {
 		set_debugreg(0, 7);
 		set_debugreg(vcpu->arch.eff_db[0], 0);
 		set_debugreg(vcpu->arch.eff_db[1], 1);
@@ -10717,6 +10717,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	 */
 	if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) {
 		WARN_ON(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP);
+		WARN_ON(vcpu->arch.switch_db_regs & KVM_DEBUGREG_AUTO_SWITCH);
 		static_call(kvm_x86_sync_dirty_debug_regs)(vcpu);
 		kvm_update_dr0123(vcpu);
 		kvm_update_dr7(vcpu);
@@ -10729,8 +10730,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	 * care about the messed up debug address registers. But if
 	 * we have some of them active, restore the old state.
 	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_restore();
+	if (hw_breakpoint_active()) {
+		if (!(vcpu->arch.switch_db_regs & KVM_DEBUGREG_AUTO_SWITCH))
+			hw_breakpoint_restore();
+		else
+			set_debugreg(__this_cpu_read(cpu_dr7), 7);
+	}
 
 	vcpu->arch.last_vmentry_cpu = vcpu->cpu;
 	vcpu->arch.last_guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
-- 
2.25.1