Re: [PATCH v6 2/5] dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation

From: Serge Semin
Date: Sun Mar 12 2023 - 18:54:23 EST

Next message: Huang, Kai: "Re: [PATCH v10 05/16] x86/virt/tdx: Add skeleton to enable TDX on demand"
Previous message: Ruslan Bilovol: "[PATCH v3] usb: gadget: epautoconf: claim smallest endpoints first"
In reply to: Cai Huoqing: "[PATCH v6 2/5] dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation"
Next in thread: Cai Huoqing: "[PATCH v6 3/5] dmaengine: dw-edma: Add support for native HDMA"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Mar 10, 2023 at 11:23:35AM +0800, Cai Huoqing wrote:
> From: Cai huoqing <cai.huoqing@xxxxxxxxx>
>
> The structure dw_edma_core_ops has a set of the pointers
> abstracting out the DW eDMA vX and DW HDMA Native controllers.
> And use dw_edma_v0_core_register to set up operation.
>
> Signed-off-by: Cai huoqing <cai.huoqing@xxxxxxxxx>
> ---
> v5->v6:
> 3.include "linux/irqreturn.h" to the head of the file.
> 4.Add irq state 'ret' to indicate whether the IRQ was actually handled.
> 5.Using edma_done_interrupt/_abort_interrupt() callback instead of global fucntion.
>
> v5 link:
> https://lore.kernel.org/lkml/20230303124642.5519-3-cai.huoqing@xxxxxxxxx/
>
> drivers/dma/dw-edma/dw-edma-core.c | 80 +++++++++----------------
> drivers/dma/dw-edma/dw-edma-core.h | 55 +++++++++++++++++
> drivers/dma/dw-edma/dw-edma-v0-core.c | 85 +++++++++++++++++++++++----
> drivers/dma/dw-edma/dw-edma-v0-core.h | 14 +----
> 4 files changed, 156 insertions(+), 78 deletions(-)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> index 1906a836f0aa..dc2908b66493 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -183,6 +183,7 @@ static void vchan_free_desc(struct virt_dma_desc *vdesc)
>
> static void dw_edma_start_transfer(struct dw_edma_chan *chan)
> {
> + struct dw_edma *dw = chan->dw;
> struct dw_edma_chunk *child;
> struct dw_edma_desc *desc;
> struct virt_dma_desc *vd;
> @@ -200,7 +201,7 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan)
> if (!child)
> return;
>
> - dw_edma_v0_core_start(child, !desc->xfer_sz);
> + dw_edma_core_start(dw, child, !desc->xfer_sz);
> desc->xfer_sz += child->ll_region.sz;
> dw_edma_free_burst(child);
> list_del(&child->list);
> @@ -285,7 +286,7 @@ static int dw_edma_device_terminate_all(struct dma_chan *dchan)
> chan->configured = false;
> } else if (chan->status == EDMA_ST_IDLE) {
> chan->configured = false;
> - } else if (dw_edma_v0_core_ch_status(chan) == DMA_COMPLETE) {
> + } else if (dw_edma_core_ch_status(chan) == DMA_COMPLETE) {
> /*
> * The channel is in a false BUSY state, probably didn't
> * receive or lost an interrupt
> @@ -594,8 +595,6 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> struct virt_dma_desc *vd;
> unsigned long flags;
>
> - dw_edma_v0_core_clear_done_int(chan);
> -
> spin_lock_irqsave(&chan->vc.lock, flags);
> vd = vchan_next_desc(&chan->vc);
> if (vd) {
> @@ -636,8 +635,6 @@ static void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> struct virt_dma_desc *vd;
> unsigned long flags;
>
> - dw_edma_v0_core_clear_abort_int(chan);
> -
> spin_lock_irqsave(&chan->vc.lock, flags);
> vd = vchan_next_desc(&chan->vc);
> if (vd) {
> @@ -649,63 +646,38 @@ static void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> chan->status = EDMA_ST_IDLE;
> }
>

> -static irqreturn_t dw_edma_interrupt(int irq, void *data, bool write)
> +static inline irqreturn_t
> +dw_edma_core_handle_int(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> {
> - struct dw_edma_irq *dw_irq = data;
> struct dw_edma *dw = dw_irq->dw;
> - unsigned long total, pos, val;
> - unsigned long off;
> - u32 mask;
> -
> - if (write) {
> - total = dw->wr_ch_cnt;
> - off = 0;
> - mask = dw_irq->wr_mask;
> - } else {
> - total = dw->rd_ch_cnt;
> - off = dw->wr_ch_cnt;
> - mask = dw_irq->rd_mask;
> - }
>
> - val = dw_edma_v0_core_status_done_int(dw, write ?
> - EDMA_DIR_WRITE :
> - EDMA_DIR_READ);
> - val &= mask;
> - for_each_set_bit(pos, &val, total) {
> - struct dw_edma_chan *chan = &dw->chan[pos + off];
> -
> - dw_edma_done_interrupt(chan);
> - }
> -
> - val = dw_edma_v0_core_status_abort_int(dw, write ?
> - EDMA_DIR_WRITE :
> - EDMA_DIR_READ);
> - val &= mask;
> - for_each_set_bit(pos, &val, total) {
> - struct dw_edma_chan *chan = &dw->chan[pos + off];
> -
> - dw_edma_abort_interrupt(chan);
> - }
> -
> - return IRQ_HANDLED;
> + return dw->core->handle_int(dw_irq, dir, dw_edma_done_interrupt,
> + dw_edma_abort_interrupt);
> }

Why on have you moved the method here?
Please get it back to dw-edma-core.h so the HW-abstraction interface would
be complete.

static inline
irqreturn_t dw_edma_core_handle_int(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir,
dw_edma_handler_t done, dw_edma_handler_t abort)
{
return dw_irq->dw->core->handle_int(dw_irq, dir, done, abort);
}

>
> static inline irqreturn_t dw_edma_interrupt_write(int irq, void *data)
> {
> - return dw_edma_interrupt(irq, data, true);
> + struct dw_edma_irq *dw_irq = data;
> +

> + return dw_edma_core_handle_int(dw_irq, EDMA_DIR_WRITE);

Then the line above would be:
+ return dw_edma_core_handle_int(dw_irq, EDMA_DIR_WRITE,
dw_edma_done_interrupt,
dw_edma_abort_interrupt);
> }
>
> static inline irqreturn_t dw_edma_interrupt_read(int irq, void *data)
> {
> - return dw_edma_interrupt(irq, data, false);
> + struct dw_edma_irq *dw_irq = data;
> +

> + return dw_edma_core_handle_int(dw_irq, EDMA_DIR_READ);

And the line above would look:
+ return dw_edma_core_handle_int(dw_irq, EDMA_DIR_READ,
dw_edma_done_interrupt,
dw_edma_abort_interrupt);

> }
>
> static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
> {

> - dw_edma_interrupt(irq, data, true);
> - dw_edma_interrupt(irq, data, false);
> + struct dw_edma_irq *dw_irq = data;
> + irqreturn_t ret = IRQ_NONE;
> +
> + ret |= dw_edma_core_handle_int(dw_irq, EDMA_DIR_WRITE);
> + ret |= dw_edma_core_handle_int(dw_irq, EDMA_DIR_READ);
>
> - return IRQ_HANDLED;
> + return ret;

Then this could be replaced with:
+ irqreturn_t ret = IRQ_NONE;
+
+ ret |= dw_edma_interrupt_write(irq, data);
+ ret |= dw_edma_interrupt_read(irq, data);
+
+ return ret;

> }
>
> static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
> @@ -806,7 +778,7 @@ static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
>
> vchan_init(&chan->vc, dma);
>
> - dw_edma_v0_core_device_config(chan);
> + dw_edma_core_ch_config(chan);
> }
>
> /* Set DMA channel capabilities */
> @@ -951,14 +923,16 @@ int dw_edma_probe(struct dw_edma_chip *chip)
>
> dw->chip = chip;
>
> + dw_edma_v0_core_register(dw);
> +
> raw_spin_lock_init(&dw->lock);
>
> dw->wr_ch_cnt = min_t(u16, chip->ll_wr_cnt,
> - dw_edma_v0_core_ch_count(dw, EDMA_DIR_WRITE));
> + dw_edma_core_ch_count(dw, EDMA_DIR_WRITE));
> dw->wr_ch_cnt = min_t(u16, dw->wr_ch_cnt, EDMA_MAX_WR_CH);
>
> dw->rd_ch_cnt = min_t(u16, chip->ll_rd_cnt,
> - dw_edma_v0_core_ch_count(dw, EDMA_DIR_READ));
> + dw_edma_core_ch_count(dw, EDMA_DIR_READ));
> dw->rd_ch_cnt = min_t(u16, dw->rd_ch_cnt, EDMA_MAX_RD_CH);
>
> if (!dw->wr_ch_cnt && !dw->rd_ch_cnt)
> @@ -977,7 +951,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> dev_name(chip->dev));
>
> /* Disable eDMA, only to establish the ideal initial conditions */
> - dw_edma_v0_core_off(dw);
> + dw_edma_core_off(dw);
>
> /* Request IRQs */
> err = dw_edma_irq_request(dw, &wr_alloc, &rd_alloc);
> @@ -990,7 +964,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> goto err_irq_free;
>
> /* Turn debugfs on */
> - dw_edma_v0_core_debugfs_on(dw);
> + dw_edma_core_debugfs_on(dw);
>
> chip->dw = dw;
>
> @@ -1016,7 +990,7 @@ int dw_edma_remove(struct dw_edma_chip *chip)
> return -ENODEV;
>
> /* Disable eDMA */
> - dw_edma_v0_core_off(dw);
> + dw_edma_core_off(dw);
>
> /* Free irqs */
> for (i = (dw->nr_irqs - 1); i >= 0; i--)
> diff --git a/drivers/dma/dw-edma/dw-edma-core.h b/drivers/dma/dw-edma/dw-edma-core.h
> index 0ab2b6dba880..4b1915a6d5b5 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.h
> +++ b/drivers/dma/dw-edma/dw-edma-core.h
> @@ -111,6 +111,21 @@ struct dw_edma {
> raw_spinlock_t lock; /* Only for legacy */
>
> struct dw_edma_chip *chip;
> +
> + const struct dw_edma_core_ops *core;
> +};
> +
> +typedef void (*dw_edma_handler_t)(struct dw_edma_chan *);
> +
> +struct dw_edma_core_ops {
> + void (*off)(struct dw_edma *dw);
> + u16 (*ch_count)(struct dw_edma *dw, enum dw_edma_dir dir);
> + enum dma_status (*ch_status)(struct dw_edma_chan *chan);
> + irqreturn_t (*handle_int)(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir,
> + dw_edma_handler_t done, dw_edma_handler_t abort);
> + void (*start)(struct dw_edma_chunk *chunk, bool first);
> + void (*ch_config)(struct dw_edma_chan *chan);
> + void (*debugfs_on)(struct dw_edma *dw);
> };
>
> struct dw_edma_sg {
> @@ -148,4 +163,44 @@ struct dw_edma_chan *dchan2dw_edma_chan(struct dma_chan *dchan)
> return vc2dw_edma_chan(to_virt_chan(dchan));
> }
>
> +static inline
> +void dw_edma_core_off(struct dw_edma *dw)
> +{
> + dw->core->off(dw);
> +}
> +
> +static inline
> +u16 dw_edma_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> +{
> + return dw->core->ch_count(dw, dir);
> +}
> +
> +static inline
> +enum dma_status dw_edma_core_ch_status(struct dw_edma_chan *chan)
> +{
> + struct dw_edma *dw = chan->dw;
> +
> + return dw->core->ch_status(chan);
> +}
> +
> +static inline
> +void dw_edma_core_start(struct dw_edma *dw, struct dw_edma_chunk *chunk, bool first)
> +{
> + dw->core->start(chunk, first);
> +}
> +
> +static inline
> +void dw_edma_core_ch_config(struct dw_edma_chan *chan)
> +{
> + struct dw_edma *dw = chan->dw;
> +
> + dw->core->ch_config(chan);
> +}
> +
> +static inline
> +void dw_edma_core_debugfs_on(struct dw_edma *dw)
> +{
> + dw->core->debugfs_on(dw);
> +}
> +
> #endif /* _DW_EDMA_CORE_H */
> diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
> index 72e79a0c0a4e..09c9cec652e1 100644
> --- a/drivers/dma/dw-edma/dw-edma-v0-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
> @@ -7,7 +7,7 @@
> */
>
> #include <linux/bitfield.h>
> -
> +#include <linux/irqreturn.h>
> #include <linux/io-64-nonatomic-lo-hi.h>
>
> #include "dw-edma-core.h"
> @@ -216,7 +216,7 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
> readq_ch(dw, dir, ch, &(__dw_ch_regs(dw, dir, ch)->name))
>
> /* eDMA management callbacks */
> -void dw_edma_v0_core_off(struct dw_edma *dw)
> +static void dw_edma_v0_core_off(struct dw_edma *dw)
> {
> SET_BOTH_32(dw, int_mask,
> EDMA_V0_DONE_INT_MASK | EDMA_V0_ABORT_INT_MASK);
> @@ -225,7 +225,7 @@ void dw_edma_v0_core_off(struct dw_edma *dw)
> SET_BOTH_32(dw, engine_en, 0);
> }
>
> -u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> +static u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> {
> u32 num_ch;
>
> @@ -242,7 +242,7 @@ u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> return (u16)num_ch;
> }
>
> -enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> +static enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> {
> struct dw_edma *dw = chan->dw;
> u32 tmp;
> @@ -258,7 +258,7 @@ enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> return DMA_ERROR;
> }
>
> -void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> +static void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> {
> struct dw_edma *dw = chan->dw;
>
> @@ -266,7 +266,7 @@ void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> FIELD_PREP(EDMA_V0_DONE_INT_MASK, BIT(chan->id)));
> }
>
> -void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> +static void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> {
> struct dw_edma *dw = chan->dw;
>
> @@ -274,18 +274,64 @@ void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> FIELD_PREP(EDMA_V0_ABORT_INT_MASK, BIT(chan->id)));
> }
>
> -u32 dw_edma_v0_core_status_done_int(struct dw_edma *dw, enum dw_edma_dir dir)
> +static u32 dw_edma_v0_core_status_done_int(struct dw_edma *dw, enum dw_edma_dir dir)
> {
> return FIELD_GET(EDMA_V0_DONE_INT_MASK,
> GET_RW_32(dw, dir, int_status));
> }
>
> -u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
> +static u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
> {
> return FIELD_GET(EDMA_V0_ABORT_INT_MASK,
> GET_RW_32(dw, dir, int_status));
> }
>

> +static
> +irqreturn_t dw_edma_v0_core_handle_int(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir,
> + dw_edma_handler_t done, dw_edma_handler_t abort)

Please detach the return value too:

+static irqreturn_t
+dw_edma_v0_core_handle_int(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir,
+ dw_edma_handler_t done, dw_edma_handler_t abort)

as it's normally done in the driver for the non-inline methods.

-Serge(y)

> +{
> + struct dw_edma *dw = dw_irq->dw;
> + unsigned long total, pos, val;
> + irqreturn_t ret = IRQ_NONE;
> + struct dw_edma_chan *chan;
> + unsigned long off;
> + u32 mask;
> +
> + if (dir == EDMA_DIR_WRITE) {
> + total = dw->wr_ch_cnt;
> + off = 0;
> + mask = dw_irq->wr_mask;
> + } else {
> + total = dw->rd_ch_cnt;
> + off = dw->wr_ch_cnt;
> + mask = dw_irq->rd_mask;
> + }
> +
> + val = dw_edma_v0_core_status_done_int(dw, dir);
> + val &= mask;
> + for_each_set_bit(pos, &val, total) {
> + chan = &dw->chan[pos + off];
> +
> + dw_edma_v0_core_clear_done_int(chan);
> + done(chan);
> +
> + ret = IRQ_HANDLED;
> + }
> +
> + val = dw_edma_v0_core_status_abort_int(dw, dir);
> + val &= mask;
> + for_each_set_bit(pos, &val, total) {
> + chan = &dw->chan[pos + off];
> +
> + dw_edma_v0_core_clear_abort_int(chan);
> + abort(chan);
> +
> + ret = IRQ_HANDLED;
> + }
> +
> + return ret;
> +}
> +
> static void dw_edma_v0_write_ll_data(struct dw_edma_chunk *chunk, int i,
> u32 control, u32 size, u64 sar, u64 dar)
> {
> @@ -356,7 +402,7 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
> dw_edma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
> }
>
> -void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> +static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> {
> struct dw_edma_chan *chan = chunk->chan;
> struct dw_edma *dw = chan->dw;
> @@ -427,7 +473,7 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> FIELD_PREP(EDMA_V0_DOORBELL_CH_MASK, chan->id));
> }
>
> -int dw_edma_v0_core_device_config(struct dw_edma_chan *chan)
> +static void dw_edma_v0_core_ch_config(struct dw_edma_chan *chan)
> {
> struct dw_edma *dw = chan->dw;
> u32 tmp = 0;
> @@ -494,12 +540,25 @@ int dw_edma_v0_core_device_config(struct dw_edma_chan *chan)
> SET_RW_32(dw, chan->dir, ch67_imwr_data, tmp);
> break;
> }
> -
> - return 0;
> }
>
> /* eDMA debugfs callbacks */
> -void dw_edma_v0_core_debugfs_on(struct dw_edma *dw)
> +static void dw_edma_v0_core_debugfs_on(struct dw_edma *dw)
> {
> dw_edma_v0_debugfs_on(dw);
> }
> +
> +static const struct dw_edma_core_ops dw_edma_v0_core = {
> + .off = dw_edma_v0_core_off,
> + .ch_count = dw_edma_v0_core_ch_count,
> + .ch_status = dw_edma_v0_core_ch_status,
> + .handle_int = dw_edma_v0_core_handle_int,
> + .start = dw_edma_v0_core_start,
> + .ch_config = dw_edma_v0_core_ch_config,
> + .debugfs_on = dw_edma_v0_core_debugfs_on,
> +};
> +
> +void dw_edma_v0_core_register(struct dw_edma *dw)
> +{
> + dw->core = &dw_edma_v0_core;
> +}
> diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.h b/drivers/dma/dw-edma/dw-edma-v0-core.h
> index ab96a1f48080..04a882222f99 100644
> --- a/drivers/dma/dw-edma/dw-edma-v0-core.h
> +++ b/drivers/dma/dw-edma/dw-edma-v0-core.h
> @@ -11,17 +11,7 @@
>
> #include <linux/dma/edma.h>
>
> -/* eDMA management callbacks */
> -void dw_edma_v0_core_off(struct dw_edma *chan);
> -u16 dw_edma_v0_core_ch_count(struct dw_edma *chan, enum dw_edma_dir dir);
> -enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan);
> -void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan);
> -void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan);
> -u32 dw_edma_v0_core_status_done_int(struct dw_edma *chan, enum dw_edma_dir dir);
> -u32 dw_edma_v0_core_status_abort_int(struct dw_edma *chan, enum dw_edma_dir dir);
> -void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first);
> -int dw_edma_v0_core_device_config(struct dw_edma_chan *chan);
> -/* eDMA debug fs callbacks */
> -void dw_edma_v0_core_debugfs_on(struct dw_edma *dw);
> +/* eDMA core register */
> +void dw_edma_v0_core_register(struct dw_edma *dw);
>
> #endif /* _DW_EDMA_V0_CORE_H */
> --
> 2.34.1
>

Next message: Huang, Kai: "Re: [PATCH v10 05/16] x86/virt/tdx: Add skeleton to enable TDX on demand"
Previous message: Ruslan Bilovol: "[PATCH v3] usb: gadget: epautoconf: claim smallest endpoints first"
In reply to: Cai Huoqing: "[PATCH v6 2/5] dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation"
Next in thread: Cai Huoqing: "[PATCH v6 3/5] dmaengine: dw-edma: Add support for native HDMA"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]