Re: [PATCH v2 1/6] arm64: dts: qcom: sdm845-tama: Add display nodes

[Konrad Dybcio]

On 13.03.2023 17:32, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> 
> Add required nodes to support display on XZ2/XZ2c. XZ3 has a
> different power rail setup and needs to be handled separately.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
[...]

> +		backlight = <&pmi8998_wled>;
> +		vddio-supply = <&vreg_l14a_1p8>;
> +		vsp-supply = <&lab>;
> +		vsn-supply = <&ibb>;
> +		panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
> +		touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
> +
> +		pinctrl-names = "default", "sleep";
> +		pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
> +		pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
pinctrl-n
pinctrl-names

> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
unnecessary

> +
> +		port {
Konrad
>  &uart6 {
>