RE: [EXT] Re: [PATCH] dt-bindings: media: amphion: use hyphen in node name of vpu core

[Ming Qian]

Hi Hans,
    Thank you for reminding me, I think it's OK to drop it.
Ming

>Ming,
>
>I recommend reposting this patch if you still want it.
>
>Regards,
>
>        Hans
>
>On 24/11/2022 09:48, Hans Verkuil wrote:
>> Rob, can you Ack (or nack) this old patch? It looks like it was
>> missed, most likely because the devicetree ML wasn't CCed.
>>
>> Regards,
>>
>>       Hans
>>
>> On 11/04/2022 09:48, Ming Qian wrote:
>>> Hyphen is recommended in node name than underscore.
>>> So change the node name from "vpu_core" to "vpu-core"
>>>
>>> Signed-off-by: Ming Qian <ming.qian@xxxxxxx>
>>> ---
>>>  Documentation/devicetree/bindings/media/amphion,vpu.yaml | 8
>>> ++++----
>>>  1 file changed, 4 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml
>>> b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
>>> index a9d80eaeeeb6..c0d83d755239 100644
>>> --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml
>>> +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
>>> @@ -47,7 +47,7 @@ patternProperties:
>>>      $ref: ../mailbox/fsl,mu.yaml#
>>>
>>>
>>> -  "^vpu_core@[0-9a-f]+$":
>>> +  "^vpu-core@[0-9a-f]+$":
>>>      description:
>>>        Each core correspond a decoder or encoder, need to configure them
>>>        separately. NXP i.MX8QM SoC has one decoder and two encoder,
>>> i.MX8QXP SoC @@ -143,7 +143,7 @@ examples:
>>>          power-domains = <&pd IMX_SC_R_VPU_MU_2>;
>>>        };
>>>
>>> -      vpu_core0: vpu_core@2d080000 {
>>> +      vpu_core0: vpu-core@2d080000 {
>>>          compatible = "nxp,imx8q-vpu-decoder";
>>>          reg = <0x2d080000 0x10000>;
>>>          power-domains = <&pd IMX_SC_R_VPU_DEC_0>; @@ -154,7 +154,7
>>> @@ examples:
>>>          memory-region = <&decoder_boot>, <&decoder_rpc>;
>>>        };
>>>
>>> -      vpu_core1: vpu_core@2d090000 {
>>> +      vpu_core1: vpu-core@2d090000 {
>>>          compatible = "nxp,imx8q-vpu-encoder";
>>>          reg = <0x2d090000 0x10000>;
>>>          power-domains = <&pd IMX_SC_R_VPU_ENC_0>; @@ -165,7 +165,7
>>> @@ examples:
>>>          memory-region = <&encoder1_boot>, <&encoder1_rpc>;
>>>        };
>>>
>>> -      vpu_core2: vpu_core@2d0a0000 {
>>> +      vpu_core2: vpu-core@2d0a0000 {
>>>          reg = <0x2d0a0000 0x10000>;
>>>          compatible = "nxp,imx8q-vpu-encoder";
>>>          power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
>>